Simple Summary
When hot volcanic fragments weld together, the pore space that carries gas becomes less connected and less permeable. Gas can then accumulate behind a seal. A pre-existing opening may release this gas and close again, but closure is not inevitable. This study follows gas through a porous body towards a local outlet that can open, close and regain strength. The calculations show that gas stored farther upstream can continue to move towards the outlet after pressure there has fallen. Under the modelled conditions, that delayed transfer can stop the outlet from closing completely. The key difference is the path taken during opening and relaxation, not simply whether an open resting state is possible. These findings suggest measuring pressure inside the porous body together with outlet displacement and gas discharge in welding experiments. The model describes a local mechanism, not the formation of an entire welded volcanic deposit.
Abstract
Hot pyroclastic material can weld into a less permeable body, while pre-existing gas-release pathways open, close and regain cohesion. Whether matrix sealing necessarily leads to closure of such a pathway is not obvious when gas remains pressurised upstream. We investigate this question with a local, one-dimensional model that couples gas-pressure redistribution and irreversible matrix evolution with storage, opening and healing at an outlet interface. Connected pore volume and permeability are represented separately. The model conserves its represented gas inventory and admits an energy balance with non-negative dissipation in each admissible regime. For the reference parameter set, constant supply produces recurrent opening and reclosure when pressure redistribution is rapid. Slower redistribution can instead allow the first closing motion to stop before contact, followed by convergence to a positive opening. Open equilibria exist on both sides of this transition; the difference is whether the evolving system reaches contact, not whether an equilibrium appears. Spatial refinement, transport benchmarks and constitutive sensitivities support this interpretation within the stated model assumptions. The mechanism motivates simultaneous pressure, displacement and discharge measurements in welding experiments; it is not a calibrated prediction for an entire ignimbrite succession.