Abstract
Automation in the construction industry, particularly in masonry construction, offers significant potential to improve efficiency, precision, and process reliability. However, ensuring consistent quality in automated construction processes requires quality control methods that are systematically integrated into the construction workflow. This paper presents a systematic process analysis to support the development of automated quality control for robotic masonry construction using a cable-driven parallel robot (CDPR). The construction process is divided into three main phases, material supply, mortar application, and brick placement. Each phase is analyzed in terms of relevant quality characteristics, required inspection information, and potentially suitable sensing and analysis technologies. Based on these requirements, existing approaches in robotics, three-dimensional sensing, computer vision, and data analysis are evaluated with respect to their suitability for automated quality control. Particular attention is paid to point-cloud-based inspection and the associated requirements for point-cloud density, surface noise, positioning accuracy, and intensity information. The analysis demonstrates that different quality-control tasks require tailored sensing and evaluation approaches and that point-cloud-based methods alone are insufficient for certain process parameters, such as mortar consistency. The results provide a structured mapping of construction process phases, quality requirements, inspection information, and suitable technologies, thereby establishing a conceptual basis for the future implementation and experimental validation of an integrated automated quality control system for robotic masonry construction.