Skip to Content
BuildingsBuildings
  • Article
  • Open Access

10 November 2026

24 Pages

Influence of Intumescent Coating Thickness on the Thermal Response of HEA-Profile Steel Columns Under Standard Fire Exposure

,
,
,
and
1
National Institute for Research and Development in Construction, Urban Planning and Sustainable Spatial Development, NIRD URBAN-INCERC Bucharest Branch, 266 Pantelimon Street, District 2, 021613 Bucharest, Romania
2
National Institute for Research and Development in Construction, Urban Planning and Sustainable Spatial Development, NIRD URBAN-INCERC Cluj-Napoca Branch, 117 Calea Floresti, 400524 Cluj-Napoca, Romania
3
University of Agronomic Sciences and Veterinary Medicine of Bucharest, 59 Marasti Blvd, District 1, 011464 Bucharest, Romania
*
Author to whom correspondence should be addressed.
This article belongs to the Special Issue Advanced Studies in Steel Structure

Abstract

Fire protection of structural steel is essential for limiting heating and preserving load-bearing capacity under fire exposure. This study investigates how intumescent coating thickness affects the thermal response of six HEA 300 specimens made of S235 steel. Measured mean dry film thickness (DFT) ranged from 1.01 to 1.88 mm. Specimens were exposed on four sides to the nominal ISO 834 standard fire curve, without applied mechanical loading and their time to reach selected steel-temperature thresholds was compared. At an adopted reference temperature of 550 °C (assumed utilization factor μ0 = 0.6160), the times reported in the experimental dataset ranged from 32 to 36 min. Specimens S4, S2, and S3 (DFT of 1.34, 1.60, and 1.88 mm) each reached 550 °C after 36 min, whereas specimen S6 (1.78 mm) reached it after 34 min. These results indicate a non-monotonic relationship between mean coating thickness and thermal response under the investigated conditions. Post-exposure observations showed local detachment of the coating, although its occurrence during the test was not determined. The reported times provide comparative thermal-performance indicators, not a standalone standardized load-bearing fire-resistance classification.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.