Next Article in Journal
Green Preparation and Dry Sliding Wear Properties of a Macro-ZTA/Fe Composite Produced by a Two-Step Method
Next Article in Special Issue
Varestraint Testing of Selective Laser Additive Manufactured Alloy 718—Influence of Grain Orientation
Previous Article in Journal
Effect of Alternating Magnetic Field on the Fatigue Behaviour of EN8 Steel and 2014-T6 Aluminium Alloy
Previous Article in Special Issue
Influence of Heat Treatments on Heat Affected Zone Cracking of Gas Tungsten Arc Welded Additive Manufactured Alloy 718
Open AccessArticle

Article Versions Notes

Metals 2019, 9(9), 985; https://doi.org/10.3390/met9090985
Action Date Notes Link
article xml file uploaded 5 September 2019 10:18 CEST Update https://www.mdpi.com/2075-4701/9/9/985/xml
article xml uploaded. 5 September 2019 10:18 CEST Update https://www.mdpi.com/2075-4701/9/9/985/xml
article pdf uploaded. 5 September 2019 10:18 CEST Updated version of record https://www.mdpi.com/2075-4701/9/9/985/pdf
article html file updated 5 September 2019 10:20 CEST Update https://www.mdpi.com/2075-4701/9/9/985/html
article html file updated 27 September 2019 10:31 CEST Update https://www.mdpi.com/2075-4701/9/9/985/html
article html file updated 13 February 2020 15:19 CET Update https://www.mdpi.com/2075-4701/9/9/985/html
Back to TopTop