Next Article in Journal
Influence of Graphite Morphology on Phase, Microstructure, and Properties of Hot Dipping and Diffusion Aluminizing Coating on Flake/Spheroidal Graphite Cast Iron
Next Article in Special Issue
Optimization of Induction Quenching Processes for HSS Roll Based on MMPT Model
Previous Article in Journal
Optimization of Replaced Grinding Wheel Diameter for Surface Grinding Based on a Cost Analysis
Previous Article in Special Issue
Grain Boundary Complexions and Phase Transformations in Al- and Cu-Based Alloys
 
 
Article

Article Versions Notes

Metals 2019, 9(4), 449; https://doi.org/10.3390/met9040449
Action Date Notes Link
article xml file uploaded 16 April 2019 14:32 CEST Original file -
article xml uploaded. 16 April 2019 14:32 CEST Update -
article pdf uploaded. 16 April 2019 14:32 CEST Version of Record https://www.mdpi.com/2075-4701/9/4/449/pdf-vor
article html file updated 16 April 2019 14:34 CEST Original file -
article xml file uploaded 17 April 2019 05:03 CEST Update -
article xml uploaded. 17 April 2019 05:03 CEST Update https://www.mdpi.com/2075-4701/9/4/449/xml
article pdf uploaded. 17 April 2019 05:03 CEST Updated version of record https://www.mdpi.com/2075-4701/9/4/449/pdf
article html file updated 17 April 2019 05:05 CEST Update -
article html file updated 25 April 2019 10:51 CEST Update -
article html file updated 18 October 2019 10:53 CEST Update -
article html file updated 12 February 2020 05:43 CET Update -
article html file updated 19 July 2022 17:36 CEST Update https://www.mdpi.com/2075-4701/9/4/449/html
Back to TopTop