Next Article in Journal
Combined Effects of Deformation and Undercooling on Isothermal Bainitic Transformation in an Fe-C-Mn-Si Alloy
Previous Article in Journal
Effect of Small Additions of Cr, Ti, and Mn on the Microstructure and Hardness of Al–Si–Fe–X Alloys
Previous Article in Special Issue
Effects of Cryogenic Treatment after Annealing of Ti-6Al-4V Alloy Sheet on Its Formability at Room Temperature
Article Menu
Issue 2 (February) cover image

Export Article

Open AccessEditorial
Metals 2019, 9(2), 137; https://doi.org/10.3390/met9020137

Metallic Additive Manufacturing: Design, Process, and Post-Processing

1
School of Engineering, Faculty of Science, Engineering and Built Environment, Deakin University, Victoria 3216, Australia
2
Industrial Engineering, Dept. Design, Production & Management, University of Twente, 7522 NB Enschede, The Netherlands
*
Authors to whom correspondence should be addressed.
Received: 16 January 2019 / Accepted: 22 January 2019 / Published: 27 January 2019
(This article belongs to the Special Issue Metallic Additive Manufacturing: Design, Process and Post-processing)
Full-Text   |   PDF [138 KB, uploaded 27 January 2019]
Note: In lieu of an abstract, this is an excerpt from the first page.

Excerpt

The first modern additive manufacturing machines, developed in the early 1990s, primarily made parts using polymers [...] View Full-Text
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
SciFeed

Share & Cite This Article

MDPI and ACS Style

Gibson, I.; Khorasani, A.M. Metallic Additive Manufacturing: Design, Process, and Post-Processing. Metals 2019, 9, 137.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Metals EISSN 2075-4701 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top