Correction: Zhang et al. Towards Selective Laser Melting of High-Density Tungsten. Metals 2023, 13, 1431

Zhang, Haipo; Wang, Daokuan; Li, Xingyu; Yin, Fengshi; Zhang, Lin; Li, Xiaodong; Qu, Xuanhui

doi:10.3390/met16040405

Open AccessCorrection

Correction: Zhang et al. Towards Selective Laser Melting of High-Density Tungsten. Metals 2023, 13, 1431

by

Haipo Zhang

^1,2,†,

Daokuan Wang

^3,†,

Xingyu Li

^4,*,

Fengshi Yin

^1,*,

Lin Zhang

^4,5,*,

Xiaodong Li

⁴ and

Xuanhui Qu

⁴

¹

School of Mechanical Engineering, Shandong University of Technology, Zibo 255049, China

²

Weihai Multicrystal Tungsten & Molybdenum Technology Co., Ltd., Weihai 264200, China

³

Department of Mechanics and Engineering Science, College of Engineering, Peking University, Beijing 100871, China

⁴

Beijing Advanced Innovation Center for Materials Genome Engineering, Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China

⁵

Institute of Materials Intelligent Technology, Liaoning Academy of Materials, Shenyang 110004, China

^*

Authors to whom correspondence should be addressed.

^†

These authors contributed equally to this work.

Metals 2026, 16(4), 405; https://doi.org/10.3390/met16040405

Submission received: 12 February 2026 / Accepted: 25 February 2026 / Published: 7 April 2026

Download Versions Notes

Following publication, it has been confirmed that authors cited one reference [46] that has been retracted prior to the publishing of this paper [1]. Adhering to our standard procedure, the Editorial Board conducted an investigation and determined that reference [46] should be removed from the reference list and its citation replaced with reference [20] through the main text. Corrections have been made accordingly in the main text of the published paper and the reference list.

The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

Zhang, H.; Wang, D.; Li, X.; Yin, F.; Zhang, L.; Li, X.; Qu, X. Towards Selective Laser Melting of High-Density Tungsten. Metals 2023, 13, 1431. [Google Scholar] [CrossRef]

Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Zhang, H.; Wang, D.; Li, X.; Yin, F.; Zhang, L.; Li, X.; Qu, X. Correction: Zhang et al. Towards Selective Laser Melting of High-Density Tungsten. Metals 2023, 13, 1431. Metals 2026, 16, 405. https://doi.org/10.3390/met16040405

AMA Style

Zhang H, Wang D, Li X, Yin F, Zhang L, Li X, Qu X. Correction: Zhang et al. Towards Selective Laser Melting of High-Density Tungsten. Metals 2023, 13, 1431. Metals. 2026; 16(4):405. https://doi.org/10.3390/met16040405

Chicago/Turabian Style

Zhang, Haipo, Daokuan Wang, Xingyu Li, Fengshi Yin, Lin Zhang, Xiaodong Li, and Xuanhui Qu. 2026. "Correction: Zhang et al. Towards Selective Laser Melting of High-Density Tungsten. Metals 2023, 13, 1431" Metals 16, no. 4: 405. https://doi.org/10.3390/met16040405

APA Style

Zhang, H., Wang, D., Li, X., Yin, F., Zhang, L., Li, X., & Qu, X. (2026). Correction: Zhang et al. Towards Selective Laser Melting of High-Density Tungsten. Metals 2023, 13, 1431. Metals, 16(4), 405. https://doi.org/10.3390/met16040405

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Menu

Correction: Zhang et al. Towards Selective Laser Melting of High-Density Tungsten. Metals 2023, 13, 1431

Reference

Share and Cite

Article Metrics

Article Access Statistics

Further Information

Guidelines

MDPI Initiatives

Follow MDPI