Abstract
A stage-based framework for predicting the total fatigue life of TC11 titanium alloy at 400 °C is developed by combining probabilistic crack initiation with deterministic crack propagation. A prescribed engineering crack size is used to separate crack initiation and crack propagation. The crack initiation life is derived from the measured total fatigue life and three-dimensional crack growth analysis. Structural size effects are introduced only into the crack initiation stage through weakest-link theory, using both log-normal and Weibull life distributions, while crack propagation is treated independently by fracture mechanics. Results show that crack initiation dominates the total fatigue life over the investigated loading range, and the predicted total life is relatively insensitive to the selected engineering crack size between 0.15 and 0.381 mm. Validation using disk-center simulated specimens shows that stage decomposition alone remains conservative. After incorporating the structural size effect, the Pf= 50% predictions move closer to the experimental results, with most predictions falling within a factor-of-two scatter band. These findings demonstrate the effectiveness of the proposed stage-specific treatment of structural size effects in transferring fatigue life predictions from standard specimens to structural components.