Abstract
Aluminium phosphate binders have attracted considerable attention due to their high-temperature resistance and environmental friendliness. However, curing-related shrinkage and cracking, together with moisture-induced degradation, can adversely affect their structural integrity and bonding performance. In this study, polyvinyl alcohol (PVA) was incorporated into a previously developed aluminium nitride (AlN)-modified aluminium phosphate binder to investigate the effects of polymer content on its microstructure, mechanical properties, thermal behaviour, and environmental durability. The results show that the binder containing 3 wt% PVA (PHAP3) exhibits the highest room-temperature shear strength of 3.06 MPa, representing a 14.6% increase compared with the PVA-free AlN-modified reference binder (PHAP0, 2.67 MPa). After 20 days of water immersion, UV irradiation, and humid–heat ageing, PHAP3 retains 61.1%, 67.2%, and 58.8% of its initial shear strength, respectively. Under water immersion, this retention rate is higher than the 37.8% recorded for PHAP0. Microstructural observations reveal that PVA incorporation improves the continuity and compactness of the binder surface, while FTIR and XPS analyses indicate changes in phosphate-related vibrations and the local chemical environments of the constituent elements, suggesting interactions between PVA and the phosphate matrix. These results demonstrate that an appropriate PVA content can improve the bonding performance and environmental durability of AlN-modified aluminium phosphate binders, with 3 wt% PVA providing the most favourable overall performance among the investigated formulations. This study provides an approach for improving the environmental durability of inorganic phosphate binders through controlled polymer incorporation.