Skip to Content
You are currently on the new version of our website. Access the old version .
MetalsMetals
  • Communication
  • Open Access

28 March 2025

10 Pages

Investigation of High-Temperature Tensile Properties and Fracture Mechanisms of GH3536 Alloy Fabricated by Selective Laser Melting

,
,
,
and
3D Printing Research and Engineering Technology Center, Beijing Institute of Aeronautical Materials, Beijing 100095, China
*
Author to whom correspondence should be addressed.

Abstract

This work revealed the mechanism of microstructure evolution on tensile properties in selective laser melted (SLM) GH3536 superalloys in the range of room temperature to 1000 °C. The results showed that SLM-GH3536 alloy exhibited isotropic tensile properties along X, Z, and 45° directions. The carbide at the grain boundary changed from banded to granular, resulting in a significant decrease in tensile strength at elevated temperatures, and the fracture mode transitioned from a mixed fracture to transgranular fracture.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.