Machining: State-of-the-Art 2022

Silva, Francisco J. G.; Fernandes, Filipe; Sousa, Vitor F. C.

doi:10.3390/met13061036

Open AccessEditorial

Machining: State-of-the-Art 2022

by

Francisco J. G. Silva

^*

,

Filipe Fernandes

and

Vitor F. C. Sousa

ISEP, Polytechnic of Porto, Rua Dr. António Bernardino de Almeida, 4249-015 Porto, Portugal

^*

Author to whom correspondence should be addressed.

Metals 2023, 13(6), 1036; https://doi.org/10.3390/met13061036

Submission received: 17 May 2023 / Accepted: 19 May 2023 / Published: 29 May 2023

(This article belongs to the Special Issue Machining: State-of-the-Art 2022)

Download Versions Notes

Excerpt

Note: In lieu of an abstract, this is an excerpt from the first page.

Although additive manufacturing is gaining prominence in the market, many applications require very high levels of precision, which are currently not attainable by additive manufacturing [...]

Share and Cite

MDPI and ACS Style

Silva, F.J.G.; Fernandes, F.; Sousa, V.F.C. Machining: State-of-the-Art 2022. Metals 2023, 13, 1036. https://doi.org/10.3390/met13061036

AMA Style

Silva FJG, Fernandes F, Sousa VFC. Machining: State-of-the-Art 2022. Metals. 2023; 13(6):1036. https://doi.org/10.3390/met13061036

Chicago/Turabian Style

Silva, Francisco J. G., Filipe Fernandes, and Vitor F. C. Sousa. 2023. "Machining: State-of-the-Art 2022" Metals 13, no. 6: 1036. https://doi.org/10.3390/met13061036

APA Style

Silva, F. J. G., Fernandes, F., & Sousa, V. F. C. (2023). Machining: State-of-the-Art 2022. Metals, 13(6), 1036. https://doi.org/10.3390/met13061036

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Menu

Machining: State-of-the-Art 2022

Excerpt

Share and Cite

Article Metrics

Article Access Statistics

Further Information

Guidelines

MDPI Initiatives

Follow MDPI