Skip to Content
You are currently on the new version of our website. Access the old version .
MetalsMetals
  • Review
  • Open Access

9 January 2023

17 Pages

Research Progress of Laser Additive Manufacturing Nickel-Based Alloy Metal Matrix Composites

,
,
,
,
,
and
1
School of Material Engineering, Shanghai University of Engineering Science, Shanghai 201620, China
2
Research Center of High-Temperature Alloy Precision Forming, Shanghai University of Engineering Science, Shanghai 201620, China
3
School of Mechanical Engineering, Shenyang Institute of Engineering, Shenyang 110136, China
*
Authors to whom correspondence should be addressed.

Abstract

Nickel-based alloy metal matrix composite (NAMMC) is a new type of composite material which is expected to replace traditional Nickel-base superalloy used in the manufacture of important hot-end components in aerospace, naval ships and industrial gas turbine engines due to its excellent high temperature strength, superior thermal fatigue resistance, high oxidation resistance and thermal corrosion resistance. However, these outstanding properties make it hard to process these materials with conventional manufacturing methods such as forging and machining owing to posing problems of high cost and energy consumptions. Laser additive manufacturing (AM) with a high degree of machining freedom and a high-energy-density laser beam as heat source has been used for processing NAMMC hot-end components with superior performance and complicated structure. Nevertheless, some manufacturing defects of poor bonding, high residual stress, cracking, pore etc. still exist in laser AM NAMMC parts. Therefore, this paper reviews research progress of laser AM NAMMC at present. The control method of manufacturing defect and the effect of reinforcements on the microstructure and mechanical properties of NAMMC are summarized. In addition, the challenges and prospects of laser AM NAMMC in the future are also discussed.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.