Skip to Content
You are currently on the new version of our website. Access the old version .
MetalsMetals
  • Article
  • Open Access

2 May 2021

12 Pages

Nonlinear Ultrasonic Guided Wave Method Using Semi-Analytical Finite Element (SAFE) Technique on a Damaged SWO-V Spring Coil

,
,
and
1
Graduate School, School of Mechanical Engineering, Pusan National University, Busan 46241, Korea
2
Institute of Nuclear Safety and Management, Pusan National University, Busan 46241, Korea
3
Department of Pipeline In-Line Inspection, Shandong Special Equipment Inspection Institute Co. Ltd., Jinan 250101, China
4
School of Mechanical Engineering, Pusan National University, Busan 46241, Korea
This article belongs to the Special Issue Combinatorial Investigations of Alloys

Abstract

This work presents a non-destructive method for quantitative essessment of fatigue damage of materials with linear elastic properties using nonlinear ultrasonic techniques. A nonlinear study was conducted on these materials with fatigue and shot peening processing using a nonlinear ultrasonic technique. A numerical method based on the semi-analytical finite element (SAFE) technique, was used to obtain the phase-matching modes of the specimens. Experiments confirm that the nonlinearity for shot peening and samples with a certain level of fatigue shows a tendency to increase with levels of fatigue.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.