Skip to Content
MetalsMetals
  • Feature Paper
  • Article
  • Open Access

19 February 2021

28 Pages

Increasing Low-Temperature Toughness of 09Mn2Si Steel through Lamellar Structuring by Helical Rolling

,
,
,
,
,
,
,
and
1
Institute of Strength Physics and Materials Sciences SB RAS, 634055 Tomsk, Russia
2
School of Advanced Manufacturing Technologies, Tomsk Polytechnic University, 634055 Tomsk, Russia
3
Institute for Materials Testing, Materials Science and Strength of Materials (IMWF), University of Stuttgart, 70569 Stuttgart, Germany
4
Department of Industrial Automation, Ternopil Ivan Puluj National Technical University, 46001 Ternopil, Ukraine

Abstract

The aim of the paper was to investigate the helical rolling parameters (a number of passes) for the microstructural modification and the low-temperature impact toughness improvement of the 09Mn2Si High Strength Low-Alloyed (HSLA) steel. In order to achieve this purpose, work spent to crack initiation and propagation was analyzed and compared with patterns of fracture surfaces. The microstructure and impact toughness values were presented in the temperature range from +20 to –70°C. Also, the fracture mechanisms in individual regions on the fracture surfaces were discussed. In addition, a methodology for computer simulation of the process was developed and implemented within the framework of the excitable cellular automata method and its integration with the kinetic theory of fracture. Finally, a theoretical analysis of the effect of grain shapes and orientations on the strain response patterns of a certain meso-volume simulating the material after the helical rolling was carried out.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.