Skip to Content
MetalsMetals
  • Article
  • Open Access

28 January 2020

13 Pages

Porous Titanium Cylinders Obtained by the Freeze-Casting Technique: Influence of Process Parameters on Porosity and Mechanical Behavior

,
,
,
,
,
,
and
1
Departamento de Ingeniería y Ciencia de los Materiales y del Transporte, Escuela Politécnica Superior, Universidad de Sevilla, Virgen de África 7, 41011 Sevilla, Spain
2
Unidad de Cálculo Estructural y Análisis Numérico, CT-Ingenieros, Avda. Hispano Aviacion 11 Torre Oeste, La Rinconada, 41300 Sevilla, Spain
3
Departamento de Tecnología Electrónica, Escuela Politécnica Superior, Universidad de Sevilla, Virgen de África 7, 41011 Sevilla, Spain
4
Departamento de Química Analítica, Escuela Politécnica Superior, Universidad de Sevilla, Virgen de África 7, 41011 Sevilla, Spain
This article belongs to the Special Issue Metallic Biomaterials Surface Engineering

Abstract

The discrepancy between the stiffness of commercially pure titanium and cortical bone tissue compromises its success as a biomaterial. The use of porous titanium has been widely studied, however, it is still challenging to obtain materials able to replicate the porous structure of the bones (content, size, morphology and distribution). In this work, the freeze-casting technique is used to manufacture cylinders with elongated porosity, using a home-made and economical device. The relationship between the processing parameters (diameter and material of the mold, temperature gradient), microstructural features and mechanical properties is established and discussed, in terms of ensuring biomechanical and biofunctional balance. The cylinders have a gradient porosity suitable for use in dentistry, presenting higher Young’s modulus at the bottom, near the cold spot and, therefore better mechanical resistance (it would be in contact with a prosthetic crown), while the opposite side, the hot spot, has bigger, elongated pores and walls.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.