Lubricants, Volume 12, Issue 5

The improvement of drilling rig systems to ensure a reduction in unproductive time spent on lowering and lifting operations for replacing drilling tools and restoring the performance of drilling equipment units is an important task. At the same time,...

In this study, a multi-objective optimization regarding the tribological characteristics of the hybrid composite with a base material of aluminum alloy A356 as a constituent, reinforced with a 10 wt.% of silicon carbide (SiC), size 39 µm, and 1...

Monolayer (CrN, AlTiN) and bilayer (CrN/AlTiN) coatings are formed on the surface of conventional heat-treated and gas-nitrided X45CrMoV5-3-1 tool steel via Cathodic Arc Physical Vapor Deposition (CAPVD), and the adhesion characteristics and room- an...

In order to optimize sealing performance, a novel labyrinth seal with semi-elliptical teeth (SET) structure is proposed in this paper, which includes semi-elliptical teeth and a series of cavities. The simulation results calculated by the numerical m...

Tribology, the study of friction, wear, and lubrication, has been a subject of interest for researchers exploring the complexities of materials and surfaces [...]

This work studied the influence of the voltage parameters on the friction and superlubricity performances of LiPF6-based ionic liquids (ILs). The results show that the voltage direction and magnitude greatly affected the friction performances of ILs...

The study of lubricating oil is paramount for the optimal functioning of modern engines, and it has generated intensive research in the automotive industry. The aim is to improve the tribological properties of lubricants by including nanomaterials as...

With the aim of improving the tribological properties of low-viscosity gear oil for automobiles, an acrylate of dialkyl dithiophosphoric acid (ADDP) with strong polar groups was synthesized. The tribological behavior of ADDP combined with molybdenum...

The paper compares the performance of two bio-ester and two mineral-oil emulsion metalworking fluids (MWFs) in finish turning an Inconel 718 alloy bar with a high hardness (HB 397 – 418). In this study, a coolant with a lean concentrate diluted...

Van der Waals heterostructures with incommensurate contact interfaces show excellent tribological performance, which provides solutions for the development of new solid lubricants. In this paper, a facile electrostatic layer-by-layer self-assembly (L...