Skip to Content
You are currently on the new version of our website. Access the old version .
MineralsMinerals
  • Editorial
  • Open Access

28 October 2026

2 Pages

Editorial for Special Issue “Circular Economy of Remining Secondary Raw Materials”

,
and
1
Departamento de Geociências, Ambiente e Ordenamento do Território, Faculdade de Ciências, Instituto de Ciências da Terra, Universidade do Porto, 4169-007 Porto, Portugal
2
Departamento de Engenharia de Minas e Geo-Ambiente, Faculdade de Engenharia, Universidade do Porto, 4200-465 Porto, Portugal
*
Author to whom correspondence should be addressed.
Globally, substantial volumes of waste streams are generated annually. Waste streams, such as mineral processing tailings, thermoelectric incineration ashes, and metallurgical slags, are typically recovered through the remining of disposal facilities. Mine tailings frequently retain critical or strategic raw materials that were previously overlooked, whereas ashes and slags concentrate specific elements following carbon combustion. Consequently, their characterization is paramount for their valorization and driving the transition toward a circular economy.
This volume represents a cross-disciplinary initiative covering various aspects of waste stream recovery. The contributions, by publication date, include the papers of Nowińska & Kokowska-Pawłowska (2024) (contribution 1), Valentim et al. (2024) (contribution 2), Nghipulile et al. (2025) (contribution 3), Liang et al. (2025) (contribution 4), Garjulli et al. (2026) (contribution 5), Nkosi et al. (2026) (contribution 6), and Mambetaliyeva et al. (2026) (contribution 7), which are a demonstration of the diversity of this research field.
The contribution by Valentim et al. (2024) (contribution 2) is dedicated to the characterization of municipal solid waste ash and the assessment of elements of interest. In this case, the authors found that valuable elements such as Sb, Pb, Cu, and Zn fall below the cut-off grades and the minimum industrial grade thresholds. However, K stands above the cut-off and seems economically viable for recovery, particularly if the ashes are washed and K is recovered from the precipitates.
Two papers are dedicated to the recovery of rare earth elements (REEs) and phosphate (contribution 4) and Cu (contribution 7) from tailings. The contribution by Liang et al. (2025) (contribution 4) outlines a three-step process for recovering REEs and phosphate from Florida flotation tailings. In these tailings, REEs are primarily present as monazite and xenotime, often associated with heavy minerals. The proposed process is effective and includes gravity separation to pre-concentrate REE- and phosphate-bearing minerals (monazite and xenotime), followed by flotation and sulfuric acid leaching to extract REEs and phosphate from the flotation concentrate. The primary bottleneck to higher efficiency is the ultra-fine grain size of the valuable minerals and their tight interlocking with waste rock.
The contribution by Mambetaliyeva et al. (2026) (contribution 7) shows how to turn tailings into resources through surface rejuvenation by regrinding and electrochemical optimization to improve Cu recovery from complex, low-grade (0.17% Cu) weathered porphyry tailings with high oxidation (53.84%). However, the authors noted that over-grinding can cause deleterious sliming effects that ruin flotation selectivity.
The other papers are related to toxic elements and elements of interest in slags. Nowińska & Kokowska-Pawłowska (2024) (contribution 1) analyzed the mineralogical and chemical composition of Zn and Pb metallurgical slags to assess their environmental impact when landfilled. The study evaluates how these slags weather and release toxic metals. The authors found that the main carriers of toxic metals are Pb sulfides and sulfates, Zn sulfides, and occasionally Zn, Pb, and Fe oxides. Zinc is released continuously, and after 12 years, its concentration exceeds the hazardous waste limit by 40 times. Lead leaches at a much lower rate. However, Pb phases, such as anglesite and galena, are the most unstable, followed by Zn phases, sphalerite, and willemite.
Nghipulile et al. (2025) (contribution 3) concluded that grind size is a critical variable affecting Cu recovery from spent refractory bricks from a Namibian smelter using flotation. The optimal copper recovery of 86% with a concentrate grade of 37% Cu was achieved using the finest grind size (53 μm), a reagent dosage of 70 g/t PAX, no sulfidiser, and a pH of 10.
Garjulli et al. (2026) (contribution 5) studied tin slags and concluded that Nb extraction can be effectively achieved via a sequential process comprising an initial reaction with molten Na hydroxide, water leaching, and final sulfuric acid leaching.
Integrated processes that co-produce vanadium alongside steel generate large volumes of by-product titaniferous slag that still contains valuable concentrations of V. Nkosi et al. (2026) (contribution 6) proposed a modified primary extraction route to recover V, and the economic feasibility of the process was evaluated to identify which process stages require further optimization.

Author Contributions

Conceptualization, A.G., B.V. and R.S.; writing—original draft preparation, A.G., B.V. and R.S.; writing—review and editing, A.G., B.V. and R.S. All authors have read and agreed to the published version of the manuscript.

Funding

This research received no external funding.

Conflicts of Interest

The authors declare no conflicts of interest.

List of Contributions

  • Nowińska, K.; Kokowska-Pawłowska, M. Mineralogy of Zinc and Lead Metallurgical Slags in Terms of Their Impact on the Environment: A Review. Minerals 2024, 14, 852. https://doi.org/10.3390/min14090852.
  • Valentim, B.; Guedes, A.; Kuźniarska-Biernacka, I.; Dias, J.; Predeanu, G. Variation in the Composition of Municipal Solid Waste Incineration Ash. Minerals 2024, 14, 1146. https://doi.org/10.3390/min14111146.
  • Nghipulile, T.; Dzinomwa, G.; Mapani, B.; Kurasha, J.; Kambobe, C. Utilisation of Pyrometallurgical Wastes: Recovery of Copper from the Spent Refractory Bricks from a Smelter in Namibia. Minerals 2025, 15, 722. https://doi.org/10.3390/min15070722.
  • Liang, H.; Zhang, P.; Jin, Z.; Medley, A.; DePaoli, D. Processing of a Phosphate Flotation Tails for Recovery of Rare Earths and Phosphate. Minerals 2025, 15, 900. https://doi.org/10.3390/min15090900.
  • Garjulli, F.; Mendes de Oliveira, J.; Gusman Garreta Zamengo, F.; Espinosa, D.; Soares Tenório, J. Hydrometallurgical Process to Extract Niobium from Tin Slag Through Alkaline Treatment and Sulfuric Acid Leaching. Minerals 2026, 16, 175. https://doi.org/10.3390/min16020175.
  • Nkosi, S.; Goso, X.; Mokone, T.; Petersen, J.; Bungane, T. Discounted Cash Flow Analysis of a Process for Vanadium Extraction from Titaniferous Slag. Minerals 2026, 16, 378. https://doi.org/10.3390/min16040378.
  • Mambetaliyeva, A.; Tussupbekova, T.; Sabirova, L.; Makasheva, G.; Yeleussiz, S.; Barmenshinova, M.; Kaliaskar, S. Grinding-Induced Surface Renewal of Legacy Sulfide Minerals and Its Impact on Tailings Reprocessing. Minerals 2026, 16, 741. https://doi.org/10.3390/min16070741.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.