Abstract
We obtain some properties of a hyperbolic Ricci soliton with certain types of potential vector fields, and we point out some conditions when it reduces to a trivial Ricci soliton. We also study those soliton submanifolds whose vector fields are the tangential components of a concurrent vector field on the ambient manifold, and in particular, we show that a totally umbilical hyperbolic Ricci soliton is an Einstein manifold. We prove that if the hyperbolic Ricci soliton hypersurface of a Riemannian manifold of constant curvature and endowed with a concurrent vector field has a parallel shape operator, then it is a metallic-shaped hypersurface, and we determine some conditions for it to be minimal. Moreover, we show that it is also a pseudosymmetric hypersurface.
MSC:
35Q51; 53B25; 53B50
1. Introduction
Stationary solutions to the hyperbolic Ricci flow [1,2,3], hyperbolic Ricci solitons, have been very recently considered in [4], where the authors studied the three-dimensional homogeneous case of manifolds with Riemannian and Lorentzian metric tensors. When the potential vector field of a soliton is of a certain type, more information about the geometry of the manifold can be obtained.
Nevertheless, smooth manifolds can be sometimes characterized by the existence of certain distinguished vector fields on them. Concircular vector fields are of special interest, having interesting applications in physics. For instance, in [5], B.-Y. Chen proved that a Lorentzian manifold is a generalized Robertson–Walker spacetime if and only if it admits a time-like concircular vector field. Concurrent vector fields are particular cases of concircular vector fields, such an example being provided by the position vector field in the Euclidean space. More generally, any warped product of an open real interval I, with s as its arclength, and an arbitrary Riemannian manifold endowed with the metric given by , admits a concurrent vector field, namely .
Having these in mind, the aim of this paper is to present some properties of hyperbolic Ricci solitons with a torse-forming potential vector field, or with particular cases of it. We also investigate the geometry of a submanifold, which is a hyperbolic Ricci soliton that is isometrically immersed into a Riemannian manifold and whose potential vector field is the tangential component of a concurrent vector field on the ambient space. In particular, we show that a totally umbilical hyperbolic Ricci soliton is an Einstein manifold. We also prove that if a hyperbolic Ricci soliton hypersurface of a Riemannian manifold of constant curvature and endowed with a concurrent vector field has parallel shape operator, then it is a metallic-shaped hypersurface, and we determine some conditions for it to be minimal. Moreover, we show that it is also a pseudosymmetric hypersurface.
2. Hyperbolic Ricci Solitons
Let be a Riemannian manifold. We shall denote by the set of smooth sections on M and by ∇ the Levi-Civita connection of g.
We recall that is called a hyperbolic Ricci soliton [4] if the vector field and the scalars satisfy
where Ric is the Ricci curvature of .
We remark that if is a Killing vector field, i.e., , then the manifold is an Einstein manifold, and if is a 2-Killing vector field [6], i.e., and , then the manifold is a Ricci soliton.
Considering particular cases of vector fields, we recover the mixed generalized quasi-Einstein, generalized quasi-Einstein and Einstein manifolds, whose definitions we shall briefly recall.
Definition 1.
Let be a nonflat Riemannian manifold of dimension . Then, M is said to be a mixed generalized quasi-Einstein manifold [7] if its Ricci tensor field Ric is not identically zero and verifies
where and δ are smooth functions and B are 1-forms on M. In particular, the manifold M is called
- 1.
- generalized quasi-Einstein [8] if or ;
- 2.
- quasi-Einstein [9] if or ;
- 3.
- Einstein [10] if .
2.1. The Trivial Case
It would be interesting to find more relaxed, nontrivial conditions under which a hyperbolic Ricci soliton reduces to an Einstein manifold. For the compact case, we prove the following results:
Proposition 1.
Let be a compact and connected hyperbolic Ricci soliton with . If the second Lie derivative of g in the direction of ξ is divergence-free and the scalar curvature r is constant on the integral curves of ξ, then ξ is a parallel vector field, i.e., , and M is a Ricci-flat manifold.
Proof.
Since , then is a constant. By taking the divergence into the soliton Equation (1) and taking into account that , we infer
We know [11] that
and we obtain
By means of Bochner’s formula,
we obtain
which, since , by integration with respect to the canonical measure, gives
hence, . Then, , , and since is a constant, from Bochner’s formula, we find
hence the conclusion. □
A compact and connected hyperbolic Ricci soliton reduces to a Ricci-flat manifold in the following case too:
Proposition 2.
Let be a compact and connected hyperbolic Ricci soliton with . If the second Lie derivative of g in the direction of ξ has a constant trace, the scalar curvature r is constant on the integral curves of ξ and , then ξ is a parallel vector field and M is a Ricci-flat manifold.
Proof.
Then, Bochner’s formula becomes
which, by integration with respect to the canonical measure, gives
hence, and . Then, , , and , hence the conclusion. □
We end this section by bringing into light the connection between the hyperbolic Ricci solitons that satisfy and the Schrödinger–Ricci equation [12]. The nonlinear Schrödinger equation mathematically describes the wave propagation, modeling the nonlinear effects, e.g., the like formation of solitons. Closely related to Ricci-type solitons, the Schrödinger–Ricci equation has, under certain assumptions, the dual 1-form of the potential vector field as a solution.
Proposition 3.
Let be a connected hyperbolic Ricci soliton with . If the second Lie derivative of g in the direction of ξ is divergence-free, then the dual 1-form η of ξ is a solution of the Schrödinger–Ricci equation.
Proof.
Since , is a constant. By taking the divergence into the soliton Equation (1) and taking into account that , we infer
2.2. Solitons with Torse-Forming Vector Field
Definition 2
([14]). Let be a Riemannian manifold. A smooth vector field ξ on M is said to be torse-forming if , where a is a smooth function and ψ is a 1-form; concircular if ; and concurrent if , where is the Levi-Civita connection of g and I is the identity endomorphism.
Next we will prove the following results concerning torse-forming vector fields:
Proposition 4.
Let ξ be a torse-forming vector field satisfying
where a is a smooth function and ψ is a 1-form on the Riemannian manifold . Then,
where ζ is the dual vector field of ψ and η is the dual 1-form of ξ.
Proof.
We have
hence,
We also have
for any . Also,
for any . Finally, we obtain the expression of the second Lie derivative of g in the direction of :
for any , and we obtain the conclusion. □
From the above proposition, we deduce the following:
Theorem 1.
If is a hyperbolic Ricci soliton with a torse-forming potential vector field ξ, then
From (4), we conclude the following:
Proposition 5.
(i) If ξ is concircular (i.e., ; hence, ), then
hence, is an Einstein manifold provided that .
Even more generally, if ξ is a conformal vector field, , for a a smooth function on M, then , and we obtain the same conclusion as before.
(ii) If , and hence , then
hence, is a quasi-Einstein manifold.
(iii) If with k a smooth function on M, then
hence, is a generalized quasi-Einstein manifold.
(iv) If with h and k smooth functions on M, then
hence, is a mixed generalized quasi-Einstein manifold.
Lemma 1.
If the second Lie derivative of g in the direction of a torse-forming vector field ξ is traceless; ξ is torqued, i.e., ; and a is constant on the integral curves of ξ, then ξ is a parallel vector field.
Proof.
By taking the trace of , we obtain
hence, and , so . □
Using the above lemma, we can state the following:
Proposition 6.
Let be a hyperbolic Ricci soliton with a torqued potential vector field ξ. If the second Lie derivative of g in the direction of ξ is traceless and a is constant on the integral curves of ξ, then ξ is a parallel vector field and M is a Ricci-flat manifold.
Proof.
We get , which implies , and , and since is a constant, from Bochner’s formula, we find
hence the conclusion. □
Now we shall provide a characterization for the Einstein case.
Proposition 7.
Let be a hyperbolic Ricci soliton with a torse-forming potential vector field ξ satisfying such that , where . Then, M is an Einstein manifold if and only if the scalar curvature r of M is .
Proof.
In this case, , , and we have
Then, (4) becomes
hence, is a quasi-Einstein manifold. Also, by a direct computation, we obtain
for any , hence,
Replacing and in (5), we infer
and we obtain the conclusion. □
A particular case of torse-forming vector field is the Reeb vector field of a Kenmotsu manifold.
Example 1.
If (for odd) is a Kenmotsu hyperbolic Ricci soliton with the Reeb potential vector field ξ, since , we obtain and
Based on Theorem 3.1. from [4], we shall give another two examples of nontrivial hyperbolic Ricci solitons.
Example 2.
Let be the three-dimensional unimodular Lorentzian Lie algebra described by
where is a suitable pseudo-orthonormal basis with a time-like vector field on the Minkowski space. Then, defines a hyperbolic Ricci soliton for .
Example 3.
Let be the three-dimensional unimodular Lorentzian Lie algebra described by
where is a suitable pseudo-orthonormal basis with a time-like vector field on the Minkowski space. Then, defines a hyperbolic Ricci soliton for .
3. Submanifolds as Hyperbolic Ricci Solitons
Let M be an isometrically immersed submanifold of a Riemannian manifold and denote the induced metric on M with g. Let ∇ and be the Levi-Civita connections on and , respectively. Then, the Gauss and Weingarten formulas are
where h is the second fundamental form and is the shape operator in the direction of the normal vector field N, defined by for X, [15].
We assume now that is a concurrent vector field, i.e., . Then, for any , we have:
hence,
We consequently obtain
for any . Then,
for any .
From the above computations, we obtain the following:
Theorem 2.
Let M be a submanifold that is isometrically immersed into a Riemannian manifold , and let ξ be a concurrent vector field on . Then, is a hyperbolic Ricci soliton if and only if the Ricci tensor field of M satisfies
for any .
Obviously, if (in particular, if M is totally geodesic, i.e., for any normal vector field N), then it is an Einstein manifold provided that , of scalar curvature .
If M is totally umbilical, then , where f is a smooth function on M and I is the identity map. So,
and we have
Then, we conclude the following:
Proposition 8.
A totally umbilical hyperbolic Ricci soliton that is isometrically immersed into a Riemannian manifold with a concurrent vector field ξ is an Einstein manifold provided that .
From (6), we notice that if is a 2-Killing vector field and , then
for any . By taking the trace, we find
and we can state the following:
Proposition 9.
There does not exist a 2-Killing vector field on a minimal submanifold with parallel shape operator that is isometrically immersed into a Riemannian manifold endowed with a concurrent vector field ξ.
3.1. Submanifolds of Manifolds with Constant Curvature
We shall further consider hyperbolic Ricci solitons that are isometrically immersed into a Riemannian manifold of constant curvature c. From (7), since
for any , where is a local orthonormal frame field on M and H is the mean curvature vector field defined by , we obtain the following:
Proposition 10.
If is a submanifold that is isometrically immersed into a Riemannian manifold of constant curvature c, and ξ is a concurrent vector field on , then is a hyperbolic Ricci soliton if and only if
for any .
Then, we have the following:
Corollary 1.
Let be a totally geodesic submanifold that is isometrically immersed into a Riemannian manifold of constant curvature c, and let ξ be a concurrent vector field on . Then, is a hyperbolic Ricci soliton if and only if
Now we will assume that M is a hypersurface with parallel shape operator A that is isometrically immersed into a Riemannian manifold , and we consider a concurrent vector field on . If M has parallel shape operator, i.e., , then Equation (7) can be written as
for any , and we can state the following:
Proposition 11.
Let M be a hypersurface that is isometrically immersed into a Riemannian manifold of constant curvature c, and let ξ be a concurrent vector field on . If M has parallel shape operator, then
provided that for any , where .
If , then provided that or and .
3.2. Metallic-Shaped Hypersurfaces
We recall that a hypersurface M is called a metallic-shaped hypersurface (see [16]) if its shape operator A satisfies
where . For certain values of p and q, they are called golden shaped ( (see [17]), silver shaped ( and ), bronze shaped ( 3 and ), copper shaped ( and ) and nickel shaped ( and (see [16]).
Proposition 12.
Let M be a connected hypersurface that has parallel shape operator that is isometrically immersed into a Riemannian manifold of constant curvature c, and let ξ be a concurrent vector field on such that is constant. If is a hyperbolic Ricci soliton, then it is a metallic-shaped hypersurface.
For particular cases, we deduce the following:
Corollary 2.
Let M be a connected hypersurface that has parallel shape operator that is isometrically immersed into a Riemannian manifold of constant curvature , and let ξ be a concurrent vector field on such that is constant. If is a hyperbolic Ricci soliton, and if one of the following cases occurs:
- 1.
- M is golden shaped and ;
- 2.
- M is silver shaped and ;
- 3.
- M is bronze shaped and ;
- 4.
- M is copper shaped and ;
- 5.
- M is nickel shaped and ;
then M is minimal, i.e., .
Remark 1.
In the above cases, we obtain the following values for λ: for the golden-, copper- and nickel-shaped hypersurfaces; for the silver-shaped hypersurface; and for the bronze-shaped hypersurface.
3.3. Pseudosymmetric Hypersurfaces
Let , , be a Riemannian manifold and R be its Riemannian curvature tensor field. Let and be the tensor fields defined by
and
respectively, where is given by
for (see [18]). Then, is called pseudosymmetric if the condition
is satisfied on the set
where is some function on , the -tensor field G is defined by
r is the scalar curvature and , [18]. If , then is called semisymmetric [19].
R. Deszcz, L. Verstraelen and Ş. Yaprak proved the following result:
Lemma 2
([20]). Let be a hypersurface that is isometrically immersed into a Riemannian space of constant curvature , . If at a point the shape operator A of M satisfies the condition
where then the relation
holds at x.
Using the above lemma, we can state the following:
Proposition 13.
Let M be a hypersurface with parallel shape operator that is isometrically immersed into a Riemannian manifold of constant curvature , and let ξ be a concurrent vector field on . If is a hyperbolic Ricci soliton, then it is pseudosymmetric.
In particular, if , then M is semisymmetric.
4. Conclusions
The theory of solitons, which are stationary solutions to geometric flows on Riemannian manifolds, has been continuously developed in the last decades. Still insufficiently investigated, hyperbolic Ricci solitons, corresponding to the hyperbolic Ricci flow, have been very recently considered [4]. The aim of the present study is to point out some properties of hyperbolic Ricci soliton submanifolds whose potential vector fields are the tangential components of a concurrent vector field on the ambient space. Since concircular (in particular, concurrent) vector fields play an important role in general relativity, this paper, being among the first ones in this direction, could generate further studies of large interest, with possible applications in physics.
Author Contributions
Formal analysis, A.M.B. and C.Ö.; investigation, A.M.B. and C.Ö. All authors have read and agreed to the published version of the manuscript.
Funding
This research received no external funding.
Institutional Review Board Statement
Not applicable.
Informed Consent Statement
Not applicable.
Data Availability Statement
Not applicable.
Conflicts of Interest
The authors declare that they have no conflict of interest.
References
- Shu, F.-W.; Shen, Y.-G. Geometric flows and black holes. arXiv 2006, arXiv:gr-qc/0610030. [Google Scholar] [CrossRef] [Scilit]
- Kong, D.; Liu, K. Wave character of metrics and hyperbolic geometric flow. J. Math. Phys. 2007, 48, 103508. [Google Scholar] [CrossRef] [Scilit]
- Dai, W.-R.; Kong, D.-X.; Liu, K. Hyperbolic geometric flow (I): Short-time existence and nonlinear stability. Pure Appl. Math. Q. 2010, 6, 331–359. [Google Scholar] [CrossRef] [Scilit]
- Faraji, H.; Azami, S.; Fasihi-Ramandi, G. Three dimensional homogeneous hyperbolic Ricci solitons. J. Nonlinear Math. Phys. 2023, 30, 135–155. [Google Scholar] [CrossRef] [Scilit]
- Chen, B.-Y. A simple characterization of generalized Robertson–Walker spacetimes. Gen. Relativ. Gravit. 2014, 46, 1833. [Google Scholar] [CrossRef] [Scilit]
- Oprea, T. 2-Killing vector fields on Riemannian manifolds. Balk. J. Geom. Appl. 2008, 13, 87–92. [Google Scholar]
- Bhattacharyya, A.; De, T. On mixed generalized quasi-Einstein manifolds. Differ. Geom. Dyn. Syst. 2007, 9, 40–46. [Google Scholar]
- Chaki, M.C. On generalized quasi Einstein manifolds. Publ. Math. Debr. 2001, 58, 683–691. [Google Scholar] [CrossRef] [Scilit]
- Chaki, M.C.; Maity, R.K. On quasi Einstein manifolds. Publ. Math. Debr. 2000, 57, 297–306. [Google Scholar] [CrossRef] [Scilit]
- Besse, A.L. Einstein Manifolds; Classics in Mathematics; Springer: Berlin/Heidelberg, Germany, 1987. [Google Scholar]
- Blaga, A.M. On warped product gradient η-Ricci solitons. Filomat 2017, 31, 5791–5801. [Google Scholar] [CrossRef] [Scilit]
- Crasmareanu, M. Last multipliers for Riemannian geometries, Dirichlet forms and Markov diffusion semigroups. J. Geom. Anal. 2017, 27, 2618–2643. [Google Scholar] [CrossRef] [Scilit]
- Chow, B.; Chu, S.-C.; Glickenstein, D.; Guenther, C.; Isenberg, J.; Ivey, T.; Knopf, D.; Lu, P.; Luo, F.; Ni, L. The Ricci Flow: Techniques and Applications: Part I, Geometric Aspects. In Mathematical Surveys and Monographs; American Mathematical Society: Providence, RI, USA, 2007; Volume 135. [Google Scholar]
- Yano, K. On the torse-forming directions in Riemannian spaces. Proc. Imp. Acad. Tokyo 1994, 20, 340–345. [Google Scholar] [CrossRef] [Scilit]
- Chen, B.-Y. Geometry of submanifolds. In Pure and Applied Mathematics; Marcel Dekker, Inc.: New York, NY, USA, 1973; No. 22. [Google Scholar]
- Özgür, C.; Özgür, N.Y. Classification of metallic shaped hypersurfaces in real space forms. Turk. J. Math. 2015, 39, 784–794. [Google Scholar] [CrossRef] [Scilit]
- Crâşmăreanu, M.; Hreţcanu, C.-E.; Munteanu, M.-I. Golden and product-shaped hypersurfaces in real space forms. Int. J. Geom. Methods Mod. Phys. 2013, 10, 1320006. [Google Scholar] [CrossRef] [Scilit]
- Deszcz, R. On pseudosymmetric spaces. Bull. Soc. Math. Belg. Ser. A 1992, 44, 1–34. [Google Scholar]
- Sinyukov, N.S. On geodesic mappings of Riemannian spaces onto symmetric Riemannian spaces. Dokl. Akad. Nauk SSSR 1954, 98, 21–23. [Google Scholar]
- Deszcz, R.; Verstraelen, L.; Yaprak, Ş. Pseudosymmetric hypersurfaces in 4-dimensional spaces of constant curvature. Bull. Inst. Math. Acad. Sin. 1994, 22, 167–179. [Google Scholar]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).