Skip to Content
You are currently on the new version of our website. Access the old version .
PolymersPolymers
  • Article
  • Open Access

16 October 2025

11 Pages

Effect of Debinding Process on Aluminum Nitride Ceramics Fabrication via Digital Light Processing 3D Printing

,
and
1
College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, China
2
College of Sino-German Science and Technology, Qingdao University of Science and Technology, Qingdao 266061, China
*
Authors to whom correspondence should be addressed.

Abstract

Aluminum nitride (AlN) ceramics exhibit exceptional properties, making them attractive for a wide range of applications. To address the growing need for customized and geometrically intricate AlN components, digital light processing (DLP) has garnered significant interest as a highly promising additive manufacturing technology. In this study, the effects of the sintering process on DLP 3D printing of AlN ceramics were investigated. An optimized slurry formulation with a solid loading of 52 vol% was developed, exhibiting excellent rheological properties. By applying a controlled sintering heating rate of 0.5 °C/min, dense AlN ceramic components were successfully fabricated, achieving a bending strength of 212.6 MPa. This provides a novel approach for optimizing the DLP additive manufacturing process of AlN ceramics.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.