In the original publication [1], ref. [36] was not cited in the caption of Figures 3 and 4.
The citation has now been inserted in the caption of Figure 3 and should read: SEM images of CF: (a,b) untreated carbon fibers, (d,e) single carbon fiber after growing VACNTs via CVD [36], (c,f) corresponding microscopic model diagrams before and after growing VACNTs, respectively. Reprinted with permission from Elsevier 2023 [36].
The citation has now been inserted in the caption of Figure 4 and should read: BET analysis results [36] of CF with growing VACNTs in situ: (a) adsorption and desorption curves; (b) the pore width. Reprinted with permission from Elsevier 2023 [36].
The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Reference
- Yang, G.; Cheng, F.; Zuo, S.; Zhang, J.; Xu, Y.; Hu, Y.; Hu, X. Growing Carbon Nanotubes In Situ Surrounding Carbon Fiber Surface via Chemical Vapor Deposition to Reinforce Flexural Strength of Carbon Fiber Composites. Polymers 2023, 15, 2309. [Google Scholar] [CrossRef] [Scilit] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).