Skip to Content
PolymersPolymers
  • Article
  • Open Access

8 December 2022

12 Pages

Toward the Decarbonization of Plastic: Monopolymer Blend of Virgin and Recycled Bio-Based, Biodegradable Polymer

,
,
and
1
Department of Engineering, University of Palermo, Viale delle Scienze, 90128 Palermo, Italy
2
INSTM Consortium for Materials Science and Technology, Via Giusti 9, 50125 Firenze, Italy
*
Author to whom correspondence should be addressed.
This article belongs to the Special Issue Decarbonization of Plastics

Abstract

Decarbonization of plastics is based on two main pillars: bio-based polymers and recycling. Mechanical recycling of biodegradable polymers could improve the social, economic and environmental impact of the use of these materials. In this regard, the aim of this study was to investigate whether concentrations of the same recycled biopolymer could significantly affect the rheological and mechanical properties of biodegradable monopolymer blends. Monopolymer blends are blends made of the same polymers, virgin and recycled. A sample of commercially available biodegradable blend was reprocessed in a single-screw extruder until two extrusion cycles were completed. These samples were exposed to grinding and melt reprocessed with 75% and 90% of the same virgin polymer. The blends were characterized by tensile tests and rheological tests. The results obtained showed that while multiple extrusions affected the mechanical and rheological properties of the polymer, the concentration of the reprocessed material present in the blends only very slightly affected the properties of the virgin material. In addition, the experimentally observed trends were accurately predicted by the additive model adopted.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.