Skip to Content
You are currently on the new version of our website. Access the old version .
PolymersPolymers
  • Article
  • Open Access

7 August 2019

18 Pages

Poly (Butyl Acrylate)-Graft-Polystyrene Synthesis by Free-Radical Polymerization: Interplay between Structure, Morphology, Mechanical, and Optical Properties

,
,
,
,
,
,
and
1
Fraunhofer Institute for Structural Durability and System Reliability, Plastics Division, Schlossgartenstrasse 6, 64289 Darmstadt, Germany
2
BASF SE, Carl-Bosch-Straße 38, 67063 Ludwigshafen am Rhein, Germany
3
INEOS Styrolution Group GmbH, Mainzer Landstrasse 50, 60325 Frankfurt am Main, Germany
4
LANXESS Deutschland GmbH, Chempark Leverkusen, Gebäude R14, 51369 Leverkusen, Germany
This article belongs to the Special Issue Self-assembly of Block Copolymers

Abstract

We report a new method of preparation of poly (butyl acrylate)-g-polystyrene/polystyrene blends by free-radical polymerization. Copolymerization of glycidyl (meth)acrylate with butyl acrylate is followed by a polymer analogous reaction of this copolymer with acrylic acid and subsequent copolymerization of the modified backbone with styrene. Investigation on the number of reactive groups per backbone chain and its molecular weight allows grafting efficiencies of about 35% to be reached, as well as low cross-linking. Blends of nanophase-separated copolymers having a backbone with Mn of around 50 kg/mol and 4 reactive groups per chain are transparent, with haze as low as 14%, tensile strength of around 22 MPa, and elongations at the break of around 3%. Correlation between morphology determined by transmission electron microscopy and properties of the blend is established.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.