Skip to Content
CrystalsCrystals
  • Correction
  • Open Access

16 September 2026

2 Pages

Correction: Zhou et al. Dynamic Recrystallization Behavior and Prediction Model of an Ultra-High-Strength Nickel-Based Corrosion-Resistant Alloy During Hot Deformation. Crystals 2026, 16, 424

,
,
,
,
and
1
Chongqing Materials Research Institute Co., Ltd., Chongqing 400707, China
2
National Engineering Research Center for Instrument Functional Materials, Chongqing 400707, China
3
Chongqing Key Laboratory of High-Performance Corrosion-Resistant Alloys, Chongqing 400707, China
4
School of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China

Addition of an Author

Qubo He was not included as an author in the original publication [1]. The corrected Author Contributions statement appears here. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Corrected Author List

Dadi Zhou 1,2,3,*, Qubo He 1,2,3, Gang Meng 1,2,3, Pujie Gou 4, Wei Jiang 1,2,3 and Tengzhong Zhang 1,2,3
1
Chongqing Materials Research Institute Co., Ltd., Chongqing 400707, China
2
National Engineering Research Center for Instrument Functional Materials, Chongqing 400707, China
3
Chongqing Key Laboratory of High-Performance Corrosion-Resistant Alloys, Chongqing 400707, China
4
School of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China

Corrected Author Contributions

D.Z.: Investigation, Data Curation, Writing—Original Draft, and Formal Analysis. Q.H.: Conceptualization, Methodology, and Resources. G.M.: Conceptualization, Methodology, Funding Acquisition, Writing—Review and Editing, Supervision, and Project Administration. P.G.: Resources and Investigation. W.J.: Methodology, Resources, Validation, and Investigation. T.Z.: Supervision, Writing—Review and Editing, Resources, and Conceptualization. All authors have read and agreed to the published version of the manuscript.
The authors state that this authorship revision solely aims to improve the authenticity and academic standardization of author attribution. No modifications have been made to the research content, experimental data, core conclusions or overall manuscript framework, and the scientific quality of the paper remains unchanged.

Reference

  1. Zhou, D.; He, Q.; Meng, G.; Gou, P.; Jiang, W.; Zhang, T. Dynamic Recrystallization Behavior and Prediction Model of an Ultra-High-Strength Nickel-Based Corrosion-Resistant Alloy During Hot Deformation. Crystals 2026, 16, 424. [Google Scholar] [CrossRef] [Scilit]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.