Abstract
In this work, a novel all-optical 4-to-2 encoder employing nonlinear resonant cavities in a two-dimensional photonic crystal is proposed and numerically investigated. The encoder consists of a lattice of chalcogenide rods incorporating nonlinear Kerr-effect cavities, enabling selective wavelength coupling through intensity-controlled resonance. By assigning three distinct optical input power levels, the proposed architecture successfully realizes all encoding states without requiring additional control signals or complex resonator configurations. Numerical results demonstrate correct encoding functionality with normalized logic-1 output powers ranging from 0.89 to 1.71 and logic-0 levels below 0.013, yielding a high contrast ratio of 18.35 dB. The encoder exhibits ultrafast temporal performance with a maximum rise time of only 108 fs, corresponding to a data transmission capability of 4.63 Tbit/s, while maintaining a low insertion loss of 3.73 dB. Furthermore, the proposed structure occupies an ultra-compact footprint of only 95 μm2, outperforming previously reported photonic crystal encoders in terms of integration density and speed. With regard to its compactness, high switching speed, excellent signal discrimination, and compatibility with current nanofabrication technologies, the proposed encoder represents a promising building block for future photonic integrated circuits, optical computing systems, and high-capacity optical communication networks.