Next Article in Journal
Recent Advances in Homogeneous/Heterogeneous Catalytic Hydrogenation and Dehydrogenation for Potential Liquid Organic Hydrogen Carrier (LOHC) Systems
Next Article in Special Issue
Advances in Oxidative Desulfurization of Fuel Oils over MOFs-Based Heterogeneous Catalysts
Previous Article in Journal
Synthesis of Indigo-Dyes from Indole Derivatives by Unspecific Peroxygenases and Their Application for In-Situ Dyeing
Previous Article in Special Issue
Effect of Adding Chelating Ligands on the Catalytic Performance of Rh-Promoted MoS2 in the Hydrodesulfurization of Dibenzothiophene
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Facile Construction of Magnetic Ionic Liquid Supported Silica for Aerobic Oxidative Desulfurization in Fuel

1
Zhenjiang Key Laboratory of Functional Chemistry, Institute of Medicine and Chemical Engineering, Zhenjiang College, Zhenjiang 212028, China
2
Institute for Energy Research, School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, China
3
Jingjiang College, Jiangsu University, Zhenjiang 212114, China
*
Authors to whom correspondence should be addressed.
Catalysts 2021, 11(12), 1496; https://doi.org/10.3390/catal11121496
Submission received: 8 October 2021 / Revised: 25 November 2021 / Accepted: 30 November 2021 / Published: 9 December 2021
(This article belongs to the Special Issue Frontiers in Heterogeneous Catalysts for Desulfurization of Fuel Oil)

Abstract

With the rapid growth in fuel demand, deep desulfurization of fuel oil is vitally necessary for the sake of health and environmental protection. In this work, a kind of magnetic ionic liquid supported silica is prepared by a facile ball milling method, and applied in the aerobic oxidative desulfurization of organosulfurs in fuel. The experimental results indicated that ball milling procedure can increase the specific surface area of samples, which is beneficial to oxidative desulfurization process. Under the optimal reaction conditions, the prepared materials can have an entire removal of aromatic sulfur compounds as well as a good recycling ability. Moreover, the introduction of Fe3O4 did not decline the desulfurization performance, but help the catalyst to be easily separated after reaction.
Keywords: polyoxometalate; ionic liquid; silica; magnetic materials; ball milling polyoxometalate; ionic liquid; silica; magnetic materials; ball milling

Share and Cite

MDPI and ACS Style

Liu, F.; Zhang, M.; Gao, Y.; Tan, H.; Li, H.; Wang, C.; Zhu, W.; Li, H. Facile Construction of Magnetic Ionic Liquid Supported Silica for Aerobic Oxidative Desulfurization in Fuel. Catalysts 2021, 11, 1496. https://doi.org/10.3390/catal11121496

AMA Style

Liu F, Zhang M, Gao Y, Tan H, Li H, Wang C, Zhu W, Li H. Facile Construction of Magnetic Ionic Liquid Supported Silica for Aerobic Oxidative Desulfurization in Fuel. Catalysts. 2021; 11(12):1496. https://doi.org/10.3390/catal11121496

Chicago/Turabian Style

Liu, Fujie, Ming Zhang, Yongkang Gao, Haojie Tan, Hongping Li, Chao Wang, Wenshuai Zhu, and Huaming Li. 2021. "Facile Construction of Magnetic Ionic Liquid Supported Silica for Aerobic Oxidative Desulfurization in Fuel" Catalysts 11, no. 12: 1496. https://doi.org/10.3390/catal11121496

APA Style

Liu, F., Zhang, M., Gao, Y., Tan, H., Li, H., Wang, C., Zhu, W., & Li, H. (2021). Facile Construction of Magnetic Ionic Liquid Supported Silica for Aerobic Oxidative Desulfurization in Fuel. Catalysts, 11(12), 1496. https://doi.org/10.3390/catal11121496

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop