Abstract
Natural-gas exploration still depends on dense drilling and 3-D seismic surveys, and the land take, waste and emissions involved keep the cost per unit of discovered resources high. Reducing the environmental footprint of exploration while improving resource discovery efficiency is therefore an important challenge for sustainable energy resource development. Exploration within cratonic basins is now mature, and the focus is shifting to basin-margin areas where data are sparse and accumulation conditions vary, so a workflow is needed that reduces both the number of exploration wells and the seismic coverage while keeping cost and impact low. We propose to predict favourable areas from deep-seated structures along a cratonic margin and illustrate the approach in the Hangjinqi area on the northern margin of the Ordos Basin, where buried Meso–Neoproterozoic aulacogens control the differential distribution of overlying source rocks and reservoirs, and where later differential activity produced low-amplitude anticlines that host gas accumulations. Production data show that 78.6% (n = 14) of wells in aulacogen interiors and at their margins produced commercial gas flow (≥1 × 104 m3/d), against 19.0% (n = 21) outside, indicating that these zones favour large-scale accumulation. For early-stage exploration, we recommend delineating aulacogen outlines with 2-D seismic calibrated by a few wells, and siting wells preferentially in aulacogen interiors and margins. By providing a geological basis for more targeted exploration, the proposed approach may help reduce unnecessary drilling, land disturbance, and exploration-related waste and emissions, thereby supporting more resource-efficient and environmentally responsible natural-gas exploration.