Skip to Content
SustainabilitySustainability
  • Article
  • Open Access

18 November 2026

27 Pages

A Multi-Level Quality Assessment Framework for Terrestrial Laser Scanning in Architectural Heritage Documentation

,
,
,
and
1
Geomatics Department, Architecture and Planning Faculty, King Abdulaziz University, Jeddah 21589, Saudi Arabia
2
Department of Civil Engineering, Faculty of Engineering, Qena University, Qena 83523, Egypt
3
Department of Civil Engineering, Faculty of Engineering, Capital University, Helwan 11731, Egypt
4
Digital Heritage Program, College of Cultural Heritage & Museology, The Royal Institute of Traditional Arts (Wrth), Riyadh 12632, Saudi Arabia

Abstract

Terrestrial Laser Scanning (TLS) has become a fundamental tool in architectural heritage documentation; however, current accuracy assessment practices commonly rely on target-based registration residuals, which provide limited information about geometric reliability at continuous surface and local sampling scales. This study addresses this gap by proposing a multi-level quality-assessment framework that evaluates TLS datasets from complementary spatial perspectives. The framework integrates three evaluation layers: (1) target-based registration fit using Total Station (TS) reference coordinates, (2) surface-based deviation analysis through planar fitting and point-to-plane distance computation, and (3) local sampling quality and point-density consistency assessment using neighborhood-based surface density metrics. The methodology was applied to a heritage wall segment of the Baron Empain Palace in Cairo, Egypt, using a Z+F Imager 5006i terrestrial laser scanner and a Leica Total Station. Target-based evaluation yielded an RMS registration-fit residual of 2.79 mm across ten targets used in the TLS-to-TS transformation. Surface deviation analysis characterized point-to-plane deviations relative to a fitted reference plane, providing a geometric description of the investigated surface rather than independent evidence of absolute accuracy or systematic distortion. Local density analysis provided descriptive statistics of point-density variation across the evaluated wall surface; however, the available results were insufficient to establish a quantitative criterion for identifying under-sampled areas. The results demonstrate that evaluating TLS reliability through complementary global, surface, and local indicators provides a more informative diagnosis than relying on registration residuals alone. The proposed framework provides a structured approach to assessing TLS data quality, with potential relevance to subsequent conservation analysis, monitoring, geometric modeling, and HBIM-related applications. By distinguishing global registration performance from surface-level geometric behavior and local sampling quality, the framework supports more transparent data-quality decisions and reduces the risk of relying on a single registration metric when assessing heritage-documentation datasets.

Article Metrics

Citations

Article Access Statistics

Article metric data becomes available approximately 24 hours after publication online.