Skip to Content
You are currently on the new version of our website. Access the old version .
SustainabilitySustainability
  • Article
  • Open Access

1 March 2023

16 Pages

Optimized Artificial Intelligent Model to Boost the Efficiency of Saline Wastewater Treatment Based on Hunger Games Search Algorithm and ANFIS

,
,
,
and
1
Department of Electrical Engineering, College of Engineering in Wadi Alddawasir, Prince Sattam bin Abdulaziz University, Wadi Alddawasir 11991, Saudi Arabia
2
Department of Electrical Engineering, Faculty of Engineering, Minia University, Minia 61111, Egypt
3
Sustainable Energy and Power Systems Research Centre, RISE, University of Sharjah, Sharjah P.O. Box 27272, United Arab Emirates
4
Mechanical Engineering and Design, School of Engineering and Applied Science, Aston University, Aston Triangle, Birmingham B4 7ET, UK

Abstract

Chemical oxygen demand (COD) and total organic carbon (TOC) removal efficiencies of saline wastewater treatment indicate the efficiency of the electrochemical oxidation process. Therefore, the main target of this paper is to simultaneously increase COD and TOC removal efficiencies using artificial intelligence and modern optimization. Firstly, an accurate model based on ANFIS was established to simulate the electrochemical oxidation process in terms of reaction time, pH, salt concentration, and DC applied voltage. Compared with ANOVA, thanks to ANFIS modelling, the RMSE values are decreased by 84% and 86%, respectively, for COD and TOC models. Additionally, the coefficient of determination values increased by 3.26% and 7.87% for COD and TOC models, respectively. Secondly, the optimal reaction time values, pH, salt concentration, and applied voltage were determined using the hunger games search algorithm (HGSA). To prove the effectiveness of the HGSA, a comparison with a slime mold algorithm, sine cosine algorithm, and Harris’s hawks optimization was conducted. The optimal values were found at a pH of 8, a reaction time of 36.6 min, a salt concentration of 29.7 g/L, and a DC applied voltage of 9 V. Under this condition, the maximum COD and TOC removal values were 97.6% and 69.4%, respectively. The overall efficiency increased from 76.75% to 83.5% (increased by 6.75%).

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.