Abstract
Atrazine pollution in water bodies has become a serious environmental problem. Pristine biochar (BC) generally exhibits limited adsorption capacity for pesticides. Although montmorillonite-modified biochar has been widely reported, the optimal ratio of Fe3+-exchanged montmorillonite (MMT) and the long-term reusability of such composites remain insufficiently understood. In this study, BC was synthesized from rice straw via high-temperature pyrolysis and subsequently modified with Fe3+-exchanged MMT at different BC:MMT mass ratios of 1:5, 1:3, 1:1, 3:1 and 5:1 to enhance atrazine removal from aqueous solution. We hypothesize that Fe3+ exchange increases the interlayer binding sites and specific surface area of MMT, thereby enhancing atrazine adsorption on the BC/MMT composite. Characterization showed that the silicon content of the optimized composite BC/MMT increased approximately 2-fold (from 24.10% to 48.27%), and its specific surface area reached 148.10 m2·g−1. Batch adsorption experiments demonstrated that BC/MMT exhibited a maximum adsorption capacity of 18.92 mg·g−1 (isotherm) and an equilibrium adsorption capacity of 14.07 mg·g−1 (kinetics), with a removal efficiency of 95% at equilibrium, about 2.4 times that of pristine BC (7.91 mg·g−1). The adsorption data were best described by the pseudo-second-order kinetic model (R2 = 0.99775) and the Freundlich isotherm model (R2 = 0.95936), indicating multilayer adsorption on a heterogeneous surface. BC/MMT retained about 72% of its initial removal efficiency after five cycles. These results indicate that the ratio-resolved Fe3+-exchanged MMT modification is an effective strategy for enhancing the atrazine adsorption performance of rice-straw BC, and BC/MMT is a promising candidate for atrazine-contaminated water remediation.