Skip to Content
MaterialsMaterials
  • Article
  • Open Access

9 January 2026

14 Pages

Modelling Stress-Dependent Magnetic Permeability Using Two-Domain Approach with an Effective Anisotropic Wall Energy in Grain-Oriented Electrical Steel

,
,
and
1
Faculty of Mechanical Engineering, Department of Physics, Kazimierz Pulaski Radom University, Stasieckiego 54, 26-600 Radom, Poland
2
Faculty of Mechatronics, Warsaw University of Technology, sw. Andrzeja Boboli 8, 02-525 Warsaw, Poland
*
Author to whom correspondence should be addressed.
This article belongs to the Section Materials Physics

Abstract

The magnetoelastic effect in grain-oriented electrical steels arises from interactions between magnetocrystalline anisotropy, domain wall confinement, and applied mechanical stress. This presents a comprehensive model based on the minimization of total magnetic energy in a two-domain system separated by a 180° Bloch wall. The model uniquely permits independent variation in the magnetization angle and external field direction, allowing accurate representation of energy competition among magnetostatic coupling, inter-domain interactions, and multi-component anisotropic confinement. The effective anisotropic wall energy incorporates isotropic, uniaxial, and six-fold crystallographic anisotropies modified by stress-induced terms. The Bloch wall position and the actual direction of magnetization are the variables that minimize the energy. Transformation to dimensionless variables enables efficient parameter identification via tri-division search. Experimental validation on M120-27s grain-oriented steel demonstrates that the model quantitatively reproduces stress-dependent 2D permeability tensors across arbitrary cutting orientations with very good quality, confirmed by determination coefficient R-squared exceeding 98%, which verifies the physical validity of the proposed model. This satisfactory agreement, together with the concept of anisotropic domain wall effective energy, represents a genuine novelty in the analysis of low-field magnetic permeability in grain-oriented electrical steels.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.