Next Article in Journal
Experimental Investigation of Phase Equilibria in the Co-Ta-Si Ternary System
Next Article in Special Issue
Experimental Investigation on Process Parameters during Laser-Assisted Turning of SiC Ceramics Based on Orthogonal Method and Response Surface Methodology
Previous Article in Journal
The Influence of Shot Peening and Artificially Ageing Aluminium Alloy 7075 on Corrosion Behaviour
Previous Article in Special Issue
Correction: Răzvan et al. Selective Laser Sintering of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, Morphological and Mechanical Characterization. Materials 2021, 14, 4240
 
 

Order Article Reprints

Journal: Materials, 2022
Volume: 15
Number: 3095

Article: Fabrication and Optimisation of Ti-6Al-4V Lattice-Structured Total Shoulder Implants Using Laser Additive Manufacturing
Authors: by Oliver Bittredge, Hany Hassanin, Mahmoud Ahmed El-Sayed, Hossam Mohamed Eldessouky, Naser A. Alsaleh, Nashmi H. Alrasheedi, Khamis Essa and Mahmoud Ahmadein
Link: https://www.mdpi.com/1996-1944/15/9/3095

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop