Skip to Content
You are currently on the new version of our website. Access the old version .
MaterialsMaterials
  • Article
  • Open Access

13 December 2022

16 Pages

Chloride Diffusion in Concrete Made with Coal Fly Ash Ternary and Ground Granulated Blast-Furnace Slag Portland Cements

,
,
and
1
Department of Science and Technology of Building Materials, Civil Engineering School, Technical University of Madrid, 28040 Madrid, Spain
2
Department of Cement Chemical Testing, LOEMCO, Technical University of Madrid (UPM), Getafe, 28906 Madrid, Spain
3
Mine and Energy Engineering School, Technical University of Madrid (UPM), 28003 Madrid, Spain
*
Author to whom correspondence should be addressed.

Abstract

Ternary Portland cement usage with a high amount of cement constituents different from clinker can afford great climate change advantages by lowering the Portland cement clinker content in the final product. This will contribute to cutting greenhouse gas emissions to close to zero by 2050. Such ternary Portland cements can be composed of different amounts of ground granulated blast-furnace slag (GBFS), coal fly ash (CFA), and clinker (K). Cements made with GGBFS, or CFA boast pozzolanic characteristics. Therefore, they would improve both the concrete compressive strength at later ages and durability. The 28- and 90-days mechanical strength test, non-steady state chloride migration test, described in NT BUILD 492, and natural chloride diffusion test (NT BUILD 443) were performed in concrete. Ternary cements made with GBFS and/or CFA presented better chloride diffusion resistance than concrete made with plain Portland cements. Furthermore, the development of compressive strength was delayed. The service life study was developed for concretes made with ternary cements with regard to the chloride penetration case.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.