Next Article in Journal
A Tribological and Ion Released Research of Ti-Materials for Medical Devices
Next Article in Special Issue
Fabrication and Optimisation of Ti-6Al-4V Lattice-Structured Total Shoulder Implants Using Laser Additive Manufacturing
Previous Article in Journal
High-Entropy Pyrochlore A2B2O7 with Both Heavy and Light Rare-Earth Elements at the A Site
Previous Article in Special Issue
Selective Laser Sintering of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, Morphological and Mechanical Characterization
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Materials
Volume 15
Issue 1
10.3390/ma15010132
materials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
Correction to Materials 2021, 14(15), 4240.
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Răzvan et al. Selective Laser Sintering of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, Morphological and Mechanical Characterization. Materials 2021, 14, 4240

by
Răzvan Păcurar
1,*,
Petru Berce
1,
Anna Petrilak
1,
Ovidiu Nemeş
2,
Cristina Ştefana Miron Borzan
1,*,
Marta Harničárová
3,4 and
Ancuţa Păcurar
1,*
1
Department of Manufacturing Engineering, Faculty of Industrial Engineering, Robotics, Management and Production Management, Technical University of Cluj-Napoca, B-dul Muncii 103–105, 400641 Cluj-Napoca, Romania
2
Department of Environmental Engineering and Sustainable Development Entrepreneurship, Faculty of Materials and Environmental Engineering, Technical University of Cluj-Napoca, B-dul Muncii 103–105, 400641 Cluj-Napoca, Romania
3
Department of Electrical Engineering, Automation and Informatics, Faculty of Engineering, Slovak University of Agriculture in Nitra, Tr. A. Hlinku 2, 949 76 Nitra, Slovakia
4
Department of Mechanical Engineering, Faculty of Technology, Institute of Technology and Business in České Budějovice, Okružní 10, 370 01 České Budějovice, Czech Republic
*
Authors to whom correspondence should be addressed.
Materials 2022, 15(1), 132; https://doi.org/10.3390/ma15010132
Submission received: 22 September 2021 / Accepted: 25 November 2021 / Published: 24 December 2021
(This article belongs to the Special Issue Advanced Laser Microfabrication)
Versions Notes
The authors wish to make the following correction to their paper [1]:
Incorrect Title
There is an error in the title. The correct title of the article is “Selective Laser Sintering of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, Morphological and Mechanical Characterization”. We apologize for this error and state that the scientific conclusions are unaffected. The original article has been updated.

Reference

  1. Păcurar, R.; Berce, P.; Petrilak, A.; Nemeş, O.; Borzan, C.Ş.M.; Harničárová, M.; Păcurar, A. Selective Laser Sintering of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, Morphological and Mechanical Characterization. Materials 2021, 14, 4240. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Păcurar, R.; Berce, P.; Petrilak, A.; Nemeş, O.; Borzan, C.Ş.M.; Harničárová, M.; Păcurar, A. Correction: Răzvan et al. Selective Laser Sintering of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, Morphological and Mechanical Characterization. Materials 2021, 14, 4240. Materials 2022, 15, 132. https://doi.org/10.3390/ma15010132

AMA Style

Păcurar R, Berce P, Petrilak A, Nemeş O, Borzan CŞM, Harničárová M, Păcurar A. Correction: Răzvan et al. Selective Laser Sintering of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, Morphological and Mechanical Characterization. Materials 2021, 14, 4240. Materials. 2022; 15(1):132. https://doi.org/10.3390/ma15010132

Chicago/Turabian Style

Păcurar, Răzvan, Petru Berce, Anna Petrilak, Ovidiu Nemeş, Cristina Ştefana Miron Borzan, Marta Harničárová, and Ancuţa Păcurar. 2022. "Correction: Răzvan et al. Selective Laser Sintering of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, Morphological and Mechanical Characterization. Materials 2021, 14, 4240" Materials 15, no. 1: 132. https://doi.org/10.3390/ma15010132

APA Style

Păcurar, R., Berce, P., Petrilak, A., Nemeş, O., Borzan, C. Ş. M., Harničárová, M., & Păcurar, A. (2022). Correction: Răzvan et al. Selective Laser Sintering of PA 2200 for Hip Implant Applications: Finite Element Analysis, Process Optimization, Morphological and Mechanical Characterization. Materials 2021, 14, 4240. Materials, 15(1), 132. https://doi.org/10.3390/ma15010132

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop