Correction: Barnat-Hunek, D., et al. Durability of Hydrophobic/Icephobic Coatings in Protection Lightweight Concrete with Waste Aggregate. Materials 2021, 14, 101

Barnat-Hunek, Danuta; Góra, Jacek; Widomski, Marcin K.

doi:10.3390/ma14030620

Open AccessCorrection

Correction: Barnat-Hunek, D., et al. Durability of Hydrophobic/Icephobic Coatings in Protection Lightweight Concrete with Waste Aggregate. Materials 2021, 14, 101

by

Danuta Barnat-Hunek

¹

,

Jacek Góra

¹

and

Marcin K. Widomski

^2,*

¹

Faculty of Civil Engineering and Architecture, Lublin University of Technology, Nadbystrzycka 40, 20-618 Lublin, Poland

²

Faculty of Environmental Engineering, Lublin University of Technology, Nadbystrzycka 40 B, 20-618 Lublin, Poland

^*

Author to whom correspondence should be addressed.

Materials 2021, 14(3), 620; https://doi.org/10.3390/ma14030620

Submission received: 24 January 2021 / Accepted: 27 January 2021 / Published: 29 January 2021

(This article belongs to the Special Issue Durability of Concrete or Mineral-Asphalt Mixtures with Recycled Aggregates)

Download Versions Notes

The authors wish to revise in the main body text of 2.1 Materials, page 3 [1], due to the presence of incorrect information.

The correct text is shown below:

Both applied hydrophobizing agents were produced by Evonik Operations GmbH, Business Line Silanes, Rodenbacher Chaussee 4 63457, Hanau, Germany. Trade names of used preparations are as follows: A1—Protectosil^®WS 405; A2—Protectosil^®WS 808. The preparations were supplied by the distributor in Poland: CFI World S.A., Robakowo.

The previously given text is shown below:

Both applied hydrophobizing agents were produced by CFI World S.A. 62-023 Robakowo, Poland, based on ingredients from Evonik Industries, Business Line Silanes, Rodenbacher Chaussee 463457 Hanau-Wolfgang, Germany. Trade names of used preparations are as follows: A1—Protectosil^®WS 405; A2—Protectosil^®WS 808.

The authors would like to apologize for any inconvenience caused to the readers by these changes.

Reference

Barnat-Hunek, D.; Góra, J.; Widomski, M.K. Durability of Hydrophobic/Icephobic Coatings in Protection Lightweight Concrete with Waste Aggregate. Materials 2021, 14, 101. [Google Scholar] [CrossRef] [PubMed]

Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Share and Cite

MDPI and ACS Style

Barnat-Hunek, D.; Góra, J.; Widomski, M.K. Correction: Barnat-Hunek, D., et al. Durability of Hydrophobic/Icephobic Coatings in Protection Lightweight Concrete with Waste Aggregate. Materials 2021, 14, 101. Materials 2021, 14, 620. https://doi.org/10.3390/ma14030620

AMA Style

Barnat-Hunek D, Góra J, Widomski MK. Correction: Barnat-Hunek, D., et al. Durability of Hydrophobic/Icephobic Coatings in Protection Lightweight Concrete with Waste Aggregate. Materials 2021, 14, 101. Materials. 2021; 14(3):620. https://doi.org/10.3390/ma14030620

Chicago/Turabian Style

Barnat-Hunek, Danuta, Jacek Góra, and Marcin K. Widomski. 2021. "Correction: Barnat-Hunek, D., et al. Durability of Hydrophobic/Icephobic Coatings in Protection Lightweight Concrete with Waste Aggregate. Materials 2021, 14, 101" Materials 14, no. 3: 620. https://doi.org/10.3390/ma14030620

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Menu

Correction: Barnat-Hunek, D., et al. Durability of Hydrophobic/Icephobic Coatings in Protection Lightweight Concrete with Waste Aggregate. Materials 2021, 14, 101

Reference

Share and Cite

Article Metrics

Article Access Statistics

Further Information

Guidelines

MDPI Initiatives

Follow MDPI