May-2 2021 - 229 articles
For the first time, an alternative way of improving the stability of Cu-based thermoelectric materials is proposed, with the investigation of two different copper chalcogenide–copper tetrahedrite composites, rich in sulfur and selenium anions, respec...
Composite materials with natural fillers have been increasingly used as an alternative to synthetically produced materials. This trend is visible from a representation of polymeric composites with natural cellulose fibers in the automotive industry o...
Passive radiative cooling, which cools an item without any electrical input, has drawn much attention in recent years. In many radiative coolers, silica is widely used due to its high emissivity in the mid-infrared region. However, the performance of...
In this paper, properties of concretes incorporating recycling waste and corrosion susceptibility of reinforcing steel bars were studied. It was established that fineness of ground granulated blast furnace slag (GGBFS) and fly ash (FA) and their simu...
The wide bandgap of 2D Mg(OH)2 inhibits its applications in visible-light photocatalytic applications. Besides, its mismatched band alignment to the redox potential of O2/H2O, brings about low efficacy of water-splitting performance. Therefore, to re...
In the present investigation, the non-recrystallization temperature (TNR) of niobium-microalloyed steel is determined to plan rolling schedules for obtaining the desired properties of steel. The value of TNR is based on both alloying elements and def...
UD glass/PA6 coupons with an open hole are subjected to tensile and compressive loading. Three layups: [0/90]5s, [+45/−45]5s and [+45/0/−45/90]3s with a shape based on ASTM D5766 were tested. Both monotonic loading as well as loading–unloading–reload...
An increasing amount of red mud (RM) is being generated globally due to the growth in aluminum production. To avoid RM pollution, low-cost methods for effectively recycling RM are being investigated. We propose a method for recycling RM as a construc...
This paper presents an experimental study investigating the corrosion damage of carbon-steel fibre reinforced concrete (SFRC) exposed to wet–dry cycles of chlorides and carbon dioxide for two years, and its effects on the mechanical performance of th...
Advanced oxidation (e.g., fenton-like reagent oxidation and ozone oxidation) is a highly important technology that uses strong oxidizing free radicals to degrade organic pollutants and mineralize them. The fenton-like reactions have the characteristi...
of 23
Get Alerted
Add your email address to receive forthcoming issues of this journal.
