Next Article in Journal
Study of the Dynamic Recrystallization Process of the Inconel625 Alloy at a High Strain Rate
Previous Article in Journal
Quantification of the Photocatalytic Self-Cleaning Ability of Non-Transparent Materials
Article Menu
Issue 3 (February-1) cover image

Export Article

Open AccessArticle

Microstructure Characterization and Mechanical Properties of Stainless Steel Clad Plate

School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
*
Author to whom correspondence should be addressed.
Materials 2019, 12(3), 509; https://doi.org/10.3390/ma12030509
Received: 14 January 2019 / Revised: 30 January 2019 / Accepted: 4 February 2019 / Published: 8 February 2019
  |  
PDF [2016 KB, uploaded 11 February 2019]
  |  

Abstract

In this study the microstructure and mechanical properties of stainless steel clad plate are researched. Due to element diffusion (Fe, Cr, Ni, Mn), a 20 μm thick diffusion layer is formed between stainless steel and carbon steel clad plate. The diffusion layer has a stable mechanical performance without obvious grain microstructure, and its internal mechanical properties show a graded change in the thickness direction. This is beneficial to a strong bond between stainless steel and carbon steel and the stable transition of mechanical performance in the thickness direction, as well as further carbon diffusion changes in the microstructure and mechanical properties near the diffusion layer of clad plate. Carburization stainless steel with a thickness of 150 μm is formed in the stainless steel side and decarburization carbon steel with a thickness of 80 μm is formed in the carbon steel side. View Full-Text
Keywords: stainless steel clad plate; element diffusion; microstructure; mechanical properties stainless steel clad plate; element diffusion; microstructure; mechanical properties
Figures

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
SciFeed

Share & Cite This Article

MDPI and ACS Style

Li, H.; Zhang, L.; Zhang, B.; Zhang, Q. Microstructure Characterization and Mechanical Properties of Stainless Steel Clad Plate. Materials 2019, 12, 509.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Materials EISSN 1996-1944 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top