Skip to Content
You are currently on the new version of our website. Access the old version .
EnergiesEnergies
  • Article
  • Open Access

4 December 2022

17 Pages

Feasibility of Harris Hawks Optimization in Combination with Fuzzy Inference System Predicting Heating Load Energy Inside Buildings

and
1
Institute of Research and Development, Duy Tan University, Da Nang 550000, Vietnam
2
School of Engineering and & Technology, Duy Tan University, Da Nang 550000, Vietnam
*
Author to whom correspondence should be addressed.
This article belongs to the Section G: Energy and Buildings

Abstract

Heating and cooling systems account for a considerable portion of the energy consumed for domestic reasons in Europe. Burning fossil fuels is the main way to produce this energy, which has a detrimental effect on the environment. It is essential to consider a building’s characteristics when determining how much heating and cooling is necessary. As a result, a study of the related buildings’ characteristics, such as the type of cooling and heating systems required for maintaining appropriate indoor air conditions, can help in the design and construction of energy-efficient buildings. Numerous studies have used machine learning to predict cooling and heating systems based on variables that include relative compactness, orientation, overall height, roof area, wall area, surface area, glazing area, and glazing area distribution. Fuzzy logic, however, is not used in any of these methods. In this article, we study a fuzzy logic approach, i.e., HHO−ANFIS (combination of Harris hawks optimization and adaptive neuro-fuzzy interface system), to predict the heating load in residential buildings and investigate the feasibility of this technique in predicting the heating load. Fuzzy techniques obtain perfect results. The analysis results show that the HHO−ANFIS with a population size of 400, the highest value of R2 (0.98709 and 0.98794), and the lowest value of RMSE (0.08769 and 0.08281) in the training and testing dataset, respectively, can predict the heating load with high accuracy. According to the high value of R2 (98%) and low value of RMSE, HHO−ANFIS can be used in predicting the heating load of residential buildings.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.