Research on an EV Dynamic Wireless Charging Control Method Adapting to Speed Change
AbstractIn order to solve the problem of the electric vehicle (EV) charging amount fluctuation caused by the variation of driving speed during dynamic wireless charging, this paper proposes an EV dynamic wireless charging control method adapting to speed change. Firstly, a dynamic wireless charging model based on a long-track transmitting coil is established, and the expression of the charging power of each load under multi-load situation is obtained. Secondly, the influence of the EV charging number and maximum driving speed on the range of system parameters is studied. Subsequently, the method for determining the load resistance value according to the driving speed under a multi-EV charging condition is further discussed. Afterwards, a charging power control method adapting to the speed variation by load adjustment is proposed. By adjusting the equivalent load of the variable-speed charging EV, its speed variation range can reach 20~60 km/h, while the remaining EVs’ charging power fluctuation range can be kept within 10%~15%. Finally, the experimental prototype is built to verify the above-mentioned control method. View Full-Text
Share & Cite This Article
Tan, L.; Zhao, W.; Ju, M.; Liu, H.; Huang, X. Research on an EV Dynamic Wireless Charging Control Method Adapting to Speed Change. Energies 2019, 12, 2214.
Tan L, Zhao W, Ju M, Liu H, Huang X. Research on an EV Dynamic Wireless Charging Control Method Adapting to Speed Change. Energies. 2019; 12(11):2214.Chicago/Turabian Style
Tan, Linlin; Zhao, Wenxuan; Ju, Minghao; Liu, Han; Huang, Xueliang. 2019. "Research on an EV Dynamic Wireless Charging Control Method Adapting to Speed Change." Energies 12, no. 11: 2214.
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.