Skip to Content
You are currently on the new version of our website. Access the old version .
SensorsSensors
  • Article
  • Open Access

26 August 2021

11 Pages

A Flexible Strain Sensor Based on Embedded Ionic Liquid

,
,
and
Institute of Biomedical Technologies, Auckland University of Technology, Auckland 1010, New Zealand
*
Author to whom correspondence should be addressed.
This article belongs to the Section Physical Sensors

Abstract

We present a simple-structured strain sensor based on a low-cost ionic liquid. The ionic liquid was made of sodium chloride/propylene glycol solution and was embedded in a linear microfluidic channel fabricated using Ecoflex. The proposed sensor is capable of measuring strain up to 100% with excellent repeatability. The highest gauge factor is obtained as 6.19 under direct current excitation and 3.40 under alternating current excitation at 1 kHz. The sensor shows negligible hysteresis and overshoot, and survived 10,000 rapid stretch-release cycles of a 100% peak strain with a minor deviation in the response signal. The sensor can be mounted to different locations on the human body and suits a variety of applications in the field of motion detection, human–machine interface and healthcare monitoring.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.