Skip to Content
You are currently on the new version of our website. Access the old version .
SensorsSensors
  • Communication
  • Open Access

22 June 2021

18 Pages

Dual-Motor Synchronization Control Design Based on Adaptive Neural Networks Considering Full-State Constraints and Partial Asymmetric Dead-Zone

,
and
1
School of Automation, Qingdao University, Qingdao 266071, China
2
Shandong Key Laboratory of Industrial Control Technology, Qingdao 266071, China
3
Guangdong Key Laboratory of Modern Control Technology, Institute of Intelligent Manufacturing, Guangdong Academy of Sciences, Guangzhou 510070, China
*
Author to whom correspondence should be addressed.

Abstract

This paper proposes a command filtering backstepping (CFB) scheme with full-state constraints by leading into time-varying barrier Lyapunov functions (T-BLFs) for a dual-motor servo system with partial asymmetric dead-zone. Firstly, for the convenience of the controller design, the conventional partial asymmetric dead-zone model was replaced with a new smooth differentiable model owing to its non-smoothness. Secondly, neural networks (NNs) were utilized to approximate the nonlinearity that exists in the dead-zone model, improving the control performance. In addition, CFB was utilized to deal with the inherent computational explosion problem of the traditional backstepping method, and an error compensation mechanism was introduced to further reduce the filtering errors. Then, by applying the T-BLF to the CFB process, the states of the system never violated the prescribed constraints, and all signals in the dual-motor servo system were bounded. The tracking error and synchronization error could converge to a small desired neighborhood of the origin. In the end, the effectiveness of the proposed control scheme was verified through simulations.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.