Skip to Content
You are currently on the new version of our website. Access the old version .
SensorsSensors
  • Article
  • Open Access

7 May 2015

20 Pages

A Micro-Computed Tomography Technique to Study the Quality of Fibre Optics Embedded in Composite Materials

,
,
,
,
,
,
,
,
…
1
Department of Material Science and Engineering, Ghent University, Technologiepark 903, 9052 Gent-Zwijnaarde, Belgium
2
UGCT—Department of Physics and Astronomy, Ghent University, Proeftuinstraat 86, 9000 Ghent, Belgium
3
Brussels Photonics Team (B-PHOT), Vrije Universiteit Brussel, Pleinlaan 2, B-1050 Brussel, Belgium
*
Author to whom correspondence should be addressed.
This article belongs to the Special Issue Optical Fiber Sensors 2012

Abstract

Quality of embedment of optical fibre sensors in carbon fibre-reinforced polymers plays an important role in the resultant properties of the composite, as well as for the correct monitoring of the structure. Therefore, availability of a tool able to check the optical fibre sensor-composite interaction becomes essential. High-resolution 3D X-ray Micro-Computed Tomography, or Micro-CT, is a relatively new non-destructive inspection technique which enables investigations of the internal structure of a sample without actually compromising its integrity. In this work the feasibility of inspecting the position, the orientation and, more generally, the quality of the embedment of an optical fibre sensor in a carbon fibre reinforced laminate at unit cell level have been proven.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.