Search Results (129)

Gold nanoparticles (AuNPs) were synthesized via two complementary routes, an inorganic surfactant-mediated method and a plant-extract-assisted biosynthesis, to elucidate how synthesis pathways influence nanoparticle physicochemical properties. In the inorganic route, hexadecyltrimethylammonium bromide (CTAB)-stabilized AuNPs were prepared using CTAB dissolution temperatures of 70–90 °C. UV–Vis spectroscopy showed localized surface plasmon resonance (LSPR) bands at 554–556 nm, while dynamic light scattering (DLS) indicated a decrease in hydrodynamic diameter from 110 to 97 nm with increasing dissolution temperature. Zeta potentials above +40 mV indicated strong electrostatic stabilization, and transmission electron microscopy (TEM) revealed ultrasmall Au cores with a narrow size distribution (2.4–3.0 nm) and a face-centered cubic crystal structure. In the biosynthetic route, AuNPs were obtained using aqueous Erythroxylum coca leaf extracts (1–4% w/v). The extracts exhibited a concentration-dependent red shift (~380 to ~420 nm), and biosynthesized AuNPs displayed LSPR bands in the 550–580 nm range. DLS yielded hydrodynamic diameters of 270–390 nm, with pronounced aggregation (3341 nm) at the lowest extract concentration. Under optimized conditions (HC5, n = 5), reproducible plasmonic and colloidal properties were obtained (maximum absorbance, localized surface plasmon resonance wavelength (λ_max) = 569.6 ± 1.7 nm; hydrodynamic diameter (D_H) = 237.6 ± 24.3 nm; absolute zeta potential (|ζ|)= 32.2 ± 2.6 mV). TEM analysis indicated predominantly quasi-spherical particles with a broader, log-normal size distribution, consistent with extract-mediated growth under heterogeneous organic capping environments. Full article

Green-synthesized metal nanoparticles are increasingly investigated for their antioxidative, antimicrobial, and stress-protective properties as eco-friendly and cost-effective alternatives to conventional chemical synthesis. Although agri-food wastes represent biomolecule-rich and sustainable resources, they remain less explored as biological matrices for green metal nanoparticle synthesis compared with plant and microbial extracts. The aim of this study was to optimize the synthesis and evaluate the bioactivity of silver nanoparticles derived from bergamot pomace, a polyphenol-rich agri-food waste. Synthesis parameters, including extract concentration, pH, extract-to-metal ratio, temperature, and reaction time, were optimized, and the nanoparticles were characterized by UV–Vis spectroscopy, dynamic light scattering, zeta potential analysis, and electron microscopy (TEM, STEM). ATR-FTIR and proteomic analyses were employed to investigate the molecular mechanisms involved in nanoparticle reduction, capping, and stabilization. The bergamot pomace-based silver nanoparticles exhibited a surface plasmon resonance peak at 430 nm, spherical morphology, good colloidal stability, and average diameters of 15–20 nm, without irreversible aggregation. A putative synthesis mechanism was proposed, involving Ag⁺ bioreduction mediated by polyphenols, ascorbic acid, and oxidoreductase-associated proteins, followed by stabilization through protein corona formation. Seed nanopriming assays on tomato and lettuce, together with in vitro antimicrobial tests against Pseudomonas syringae pv. tomato and Xanthomonas campestris pv. vesicatoria, demonstrated phytostimulatory and antimicrobial effects at very low nanoparticle concentrations. Overall, this study highlights bergamot pomace as a valuable resource for green silver nanoparticle synthesis, supporting its applicability in sustainable agriculture. Full article

The rapid and accurate detection of SARS-CoV-2 biomarkers remains a critical requirement for effective outbreak control and decentralized diagnostics. Although RT-PCR is the current gold standard, its reliance on centralized laboratories and long processing times limits its applicability in point-of-care settings. In this context, optical biosensing platforms based on surface plasmon resonance (SPR) offer attractive features, including label-free, real-time, and quantitative detection. This study explores the use of synthetic receptors for the highly sensitive detection of the receptor-binding domain (RBD) of the SARS-CoV-2 spike protein. Specifically, soft molecularly imprinted polymer nanoparticles (nanoMIPs) were employed as synthetic receptors and integrated into a high-sensitivity, portable plasmonic platform based on a D-shaped plastic optical fiber (POF) SPR sensor. The nanoMIPs were selectively imprinted against the RBD, characterized by Dynamic Light Scattering (DLS), Isothermal Titration Calorimetry (ITC), and Scanning Electron Microscopy (SEM) to confirm nanoMIPs size, binding properties, and surface morphology. Next, the nanoMIPs were immobilized onto a gold-coated sensing surface, enabling enhanced specificity, affinity, and signal amplification compared to conventional biological recognition elements. The resulting RBD-SPR-nanoMIPs sensor demonstrated promising analytical performance, exhibiting high selectivity against potentially interfering proteins and an anticipated sensitivity suitable for RBD detection at femtomolar concentrations. The inherent stability of nanoMIPs suggests the potential for reusable SPR sensing platforms, paving the way for next-generation synthetic receptor-based plasmonic biosensors. Full article

Gold nanorods (AuNRs) were synthesized and optimized with the aim of obtaining strongly hydrophilic nanomaterials, suitable as a drug delivery system (DDS) for copper-based drugs. After careful purification, AuNRs were characterized by ultraviolet–visible–near-infrared spectroscopy (UV–Vis–NIR), showing two typical localized surface plasmon resonance (LSPR) bands in the range 550–750 nm. Fourier Transform Infrared (FT-IR) and high-resolution X-ray photoelectron (HR-XPS) spectroscopies verified the surface functionalization. Transmission electron microscopy (TEM) showed AuNRs with regular shape and size, with an aspect ratio (AR) of 2.6. Dynamic Light Scattering (DLS) measurements confirmed the size and the stability in water for up to 3 months. The AuNRs were conjugated with copper(I) drugs, i.e., [Cu(PTA)₄]BF₄ (PTA = 1,3,5-triaza-7-phosphadamantane). The drug loading procedures and efficiency were optimized, and the best loading was η (%) = 50 ± 7%. The non-covalent interactions of the Cu(I) complex with the AuNRs were studied by means of UV–Vis–NIR, ζ-potential, HR-TEM, FT-IR, synchrotron radiation-induced X-ray photoelectron (SR-XPS), and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy measurements. The MTT assay performed on Vero E6 cells showed that AuNRs and AuNR-Cu(I) conjugates had no significant effect on cell viability, being biocompatible, causing a reduction in cell viability only after prolonged exposure. Full article

Background: Boron neutron capture therapy (BNCT) represents a highly selective therapeutic modality for recalcitrant cancers, leveraging the nuclear reaction initiated by thermal neutron capture in boron-10 (¹⁰B) to deliver high-linear energy transfer radiation (α-particles and ⁷Li ions) directly within tumor cell boundaries. However, the widespread clinical adoption of BNCT is critically hampered by the pharmacological challenge of achieving sufficiently high, tumor-selective intracellular ¹⁰B concentrations (20–50 μg of ¹⁰B/g tissue). Conventional small-molecule boron carriers often exhibit dose-limiting non-specificity, rapid systemic clearance, and poor cellular uptake kinetics. Methods: To overcome these delivery barriers, we synthesized and characterized a novel dual-modality nanoplatform based on highly biocompatible, functionalized graphene oxide (GO). This platform was structurally optimized via covalent conjugation with high-boron content carborane clusters (dodecacarborane derivatives) for enhanced BNCT efficacy. Crucially, the nanocarrier was further decorated with plasmonic gold nanostructures (AuNPs), endowing the system with intrinsic surface-enhanced Raman scattering (SERS) properties, enabling real-time, high-resolution intracellular tracking and quantification. Results: We evaluated the synthesized GO@Carborane@Au nanoplatforms for their stability, cytotoxicity, and internalization characteristics. Cytotoxicity assays demonstrated excellent biocompatibility against the non-malignant human keratinocyte line (HaCaT) while showing selective toxicity (upon irradiation, if tested) and high cellular uptake efficiency in the aggressive human glioblastoma tumor cell line (T98G). The integrated plasmonic component allowed for the successful, non-destructive monitoring of nanoplatform delivery and accumulation within both HaCaT and T98G cells using SERS microscopy, confirming the potential for pharmacokinetic and biodistribution studies in vivo. Conclusions: This work details the successful synthesis and preliminary in vitro validation of a unique graphene oxide-based dual-modality nanoplatform designed to address the critical delivery and monitoring challenges of BNCT. By combining highly efficient carborane delivery with an integrated photonic trace marker, this system establishes a robust paradigm for next-generation theranostic agents, significantly advancing the potential for precision, image-guided BNCT for difficult-to-treat cancers like glioblastoma. Full article

Due to the indiscriminate use of antimicrobial drugs in the treatment of infectious diseases, human pathogenic bacteria have developed resistance to many commercially available antibiotics. Medicinal plants such as Convolvulus arvensis represent a renewable resource for the development of alternative therapeutic agents. This study aimed to evaluate the antibacterial activity of silver nanoparticles (AgNPs) biosynthesized from C. arvensis against two clinical antibiotic-resistant bacterial isolates. The pathogenic isolates were identified as Staphylococcus aureus MRSA and Escherichia coli ESBL using 16S rRNA gene sequencing. Silver nanoparticles were synthesized via a green synthesis approach, and their physicochemical properties were characterized using UV–Vis spectroscopy, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, zeta potential, and dynamic light scattering (DLS). The synthesized C. arvensis–AgNPs exhibited a surface plasmon resonance peak at 475 nm and predominantly spherical morphology with particle sizes ranging from 102.34 to 210.82 nm. FTIR analysis indicated the presence of O–H, C–O, C–N, C–H, and amide functional groups. The nanoparticles showed a zeta potential of −18.9 mV and an average hydrodynamic diameter of 63 nm. The antibacterial activity of the biosynthesized AgNPs was evaluated against methicillin-resistant S. aureus (MRSA and ATCC 29213) and E. coli (ESBL and ATCC 25922) using agar diffusion, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) assays. Inhibition zones ranged from 10 to 13 mm, with MIC and MBC values of 12.5–25 µg/mL and 25–50 µg/mL, respectively. In addition, the nanoparticles exhibited antioxidant activity (DPPH assay, IC₅₀ = 0.71 mg/mL) and anti-inflammatory effects as determined by protein denaturation inhibition. No cytotoxic effects were observed in the MCF-7 cell line at the MIC level. These findings suggest that C. arvensis–AgNPs have potential as natural antimicrobial, antioxidant, and anti-inflammatory agents. Full article

Herein, we propose a simple and cost-effective method for fabricating moderate-sensitivity surface-enhanced Raman scattering (SERS) substrates using Cu-plasma polymer fluorocarbon (Cu-PPFC) nanocomposite films fabricated through RF sputtering. The use of a composite target composed of carbon nanotube (CNT), Cu, and polytetrafluoroethylene (PTFE) powders (5:60–80:35–15 wt%) offers the advantage of the simple fabrication of moderate-sensitivity SERS substrates with a single cathode compared to co-sputtering. X-ray photoelectron spectroscopy (XPS) revealed that the film surface was partially composed of metallic Cu with Cu-F bonds and Cu–O bonds, confirming the coexistence of the conducting and plasmon-active domains. UV-VIS spectroscopy revealed a distinct absorption peak at approximately 680 nm, indicating the excitation of localized surface plasmon resonances in the Cu nanoclusters embedded in the plasma polymer fluorocarbon (PPFC) matrix. Atomic force microscopy and grazing incidence small-angle X-ray scattering analyses confirmed that the Cu nanoparticles were uniformly distributed with interparticle distances of 20–35 nm. The Cu-PPFC nanocomposite film with the highest Cu content (80 wt%) exhibited a Raman enhancement factor of 2.18 × 10⁴ for rhodamine 6G, demonstrating its potential as a moderate-sensitivity SERS substrate. Finite-difference time-domain (FDTD) simulations confirmed the strong electromagnetic field localization at the Cu-Cu nanogaps separated by the PPFC matrix, corroborating the experimentally observed SERS enhancement. These results suggest that a Cu-PPFC nanocomposite film, easily fabricated using a composite target, provides an efficient and scalable route for fabricating reproducible, inexpensive, and moderate-sensitivity SERS substrates suitable for practical sensing applications. Full article

Single exosomes are detected via surface-enhanced Raman scattering (SERS) due to electromagnetic field accumulation on a specially designed flexible metasurface. This metasurface is a modulated silver nanofilm deposited on a thin, flexible plastic substrate. An explicit Equation for calculating the local electric field is given. The field reaches extremely high values under plasmon resonance conditions and fills the depressions of the metasurface. The thin, flexible metasurface can be incorporated into automated Lab-On-Chip analytical systems and used for spectroscopic studies of exosomes. We propose a method to distinguish individual exosomes from the HEK293T cell line on the metasurface and then obtain and assign their SERS spectra. An important advantage of the plasmonic metasurface presented in this work is its spatial complementarity to exosomes and other vesicle-like objects. The plasmonic metasurface is fabricated using holographic lithography and further investigated using a correlation approach combining atomic force microscopy, scanning spreading resistance microscopy, and surface-enhanced spectroscopy. Full article

This study examines the impact of incorporating a thin gold (Au) nanofilm as an interfacial buffer layer between the anode and the active layer in poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C₆₁-butyric acid methyl ester (P3HT:PCBM) organic solar cells. A nominal 6 nm Au layer was thermally evaporated onto indium tin oxide (ITO) substrates and subsequently annealed at 550 °C for 30 and 60 min before completing the device fabrication. The optical, morphological, and electrical consequences of introducing these annealed Au films were systematically evaluated. Optical measurements revealed a marked enhancement in light absorption: the unannealed Au/P3HT:PCBM film showed a 54% increase at 560 nm, rising to 79% after 60 min of annealing, attributed to localized surface plasmon resonance. In contrast, electrical characterization indicated a decline in overall photovoltaic performance, with all parameters decreasing except for a modest 2% increase in fill factor. Atomic force microscopy further revealed that the actual Au nanofilm thickness was approximately 16 nm—significantly higher than the nominal 6 nm—leading to increased roughness and aggregation. The excessive thickness and roughened morphology of the annealed Au film likely hindered charge transport and reduced exciton generation by scattering and reflecting incident light away from the active layer. These findings highlight the competing effects of Au nanofilms: while they enhance optical absorption, they simultaneously degrade electrical performance. This underscores the importance of carefully optimizing nanofilm thickness and morphology to achieve a balanced interplay between plasmonic enhancement and electronic transport in organic solar cells. Full article

Gold–silver nanoshells (GS-NSs) are hollow spherical nanoparticles with an alloyed Ag-Au shell. GS-NSs exhibit a tunable localized surface plasmon resonance (LSPR) in the visible to near-IR wavelengths as a function of composition and shell thickness and offer greater stability across pH ranges compared to other metal nanoparticles. These properties make GS-NSs promising materials for diagnostics, photothermal therapy, and photocatalysis. However, current research has explored GS-NSs only in aqueous systems, since they immediately aggregate in other solvents, limiting their utility. This paper provides an in-depth study of the choice and effect of non-thiol ligands on the stability and phase-transfer of GS-NSs from aqueous to non-aqueous solvents, such as ethylene glycol, tetrahydrofuran, dichloromethane, and toluene. Ligand exchange for functionalization of GS-NSs was performed with Triton X-100 (TX100), sodium stearate (NaSt), polyvinylpyrrolidone (PVP), and hydroxypropyl cellulose (HPC), prior to phase-transfer. The nanoparticles were phase-transferred to the non-aqueous solvents, and the stability of the colloids in the various solvents before and after functionalization was recorded with UV–visible spectroscopy, dynamic light scattering (DLS), zeta potential (ζ), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The study was also extended to include silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) to evaluate broad-range applicability. Among the ligands studied, HPC functionalization demonstrated the widest range of phase-transfer stability across 21 days for all three particle systems studied. UV–vis spectroscopy demonstrated sustained LSPR integrity after HPC functionalization in EG, THF, and DCM. SEM, TEM, and hydrodynamic size measurements by DLS further confirmed no aggregation in EG, THF, and DCM but suggested possible twinning or clustering in the solution. Overall, this work successfully identified non-toxic alternatives to expand the LSPR stability of citrate-synthesized metal nanoparticles in organic solvents. Full article

Volatile organic compound (VOC) monitoring is crucial for environmental safety and health, but conventional gas sensors often suffer from poor selectivity or lack spatial information. Here, we report a localized surface plasmon resonance (LSPR) gas sensor based on Au nano-urchins coated with a zeolitic imidazolate framework (ZIF-8) for both the quantitative detection and visualization of VOCs. Substrates were fabricated by immobilizing Au nano-urchins (~90 nm) on 3-aminopropyltriethoxysilane-modified glass and subsequently growing ZIF-8 crystals (~250 nm) for different durations. Scanning electron microscopy and optical analysis revealed that 90 min of ZIF-8 growth provided the optimal coverage and strongest plasmonic response. Using a spectrometer-based LSPR system, the optimized substrate exhibited clear, concentration-dependent responses to three representative VOCs, 2-pentanone, acetic acid, and ethyl acetate, over nine concentrations, with detection limits of 12.7, 14.5, and 36.3 ppm, respectively. Furthermore, a camera-based LSPR visualization platform enabled real-time imaging of gas plumes and evaporation-driven diffusion, with differential pseudo-color mapping providing intuitive spatial distributions and concentration dependence. These results demonstrate that ZIF-8-modified Au nano-urchin substrates enable sensitive and reproducible VOC detection and, importantly, transform plasmonic sensing into a visual modality, offering new opportunities for integrated LSPR–surface-enhanced Raman scattering dual-mode gas sensing in the future. Full article

Background: One of the most widely used metal nanoparticles in biological applications is gold, which has unique physicochemical characteristics. Strong localized surface plasmon resonance (LSPR) endows them with exceptional optical properties that facilitate the development of innovative methods for biosensing, bioimaging, and cancer research, particularly in the context of photothermal and photodynamic therapy. Methods: This study marked the first time that Mandragora autumnalis ethanolic extract (MAE) was utilized in the environmentally friendly synthesis of gold nanoparticles (AuNPs). Several characterization methods, including dynamic light scattering analysis (DLS), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and biological methods, were used to emphasize the anti-cancerous activity of the biogenic AuNPs. Results: MAE-AuNPs showed a surface plasmon resonance band at 570 nm. DLS and SEM demonstrated the synthesis of small, spherical AuNPs with a zeta potential of −19.07 mV. The crystalline nature of the AuNPs was confirmed by the XRD pattern, and data from FTIR and TGA verified that MAE-AuNPs played a part in stabilizing and capping the produced AuNPs. In addition, the MAE-AuNPs demonstrated their potential effectiveness as antioxidant and anticancer therapeutic agents by demonstrating radical scavenging activity and anticancer activity against a number of human cancer cell lines, specifically triple-negative breast cancer cells. Conclusions: Green synthesis techniques are superior to other synthesis methods because they are simple, economical, energy-efficient, and biocompatible, which reduces the need for hazardous chemicals in the reduction process. This article highlights the significance of characterizing MAE-AuNPs and evaluating their antioxidant and anticancer properties. Full article

The detection of trace chemicals at low and ultra-low concentrations is critical for applications in environmental monitoring, medical diagnostics, food safety and other fields. Conventional detection techniques often lack the required sensitivity, specificity, or cost-effectiveness, making real-time, in situ analysis challenging. Surface-enhanced Raman spectroscopy (SERS) is a powerful analytical tool, offering improved sensitivity through the enhancement of Raman scattering by plasmonic nanostructures. While noble metals such as Ag and Au are currently the reference choices for SERS substrates, fabrication methods should balance enhancement efficiency, reproducibility and scalability. In this study, we propose a novel approach for SERS substrate fabrication using reactive Aerosol Jet Printing (r-AJP) as an innovative additive manufacturing technique. The r-AJP process enables in-flight Ag seed reduction and nucleation of Ag nanoparticles (NPs) by mixing silver nitrate and ascorbic acid aerosols before deposition, as suggested by computational fluid dynamics (CFD) simulations. The resulting coatings were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses, revealing the formation of nanoporous crystalline Ag agglomerates partially covered by residual matter. The as-prepared SERS substrates exhibited remarkable SERS activity, demonstrating a high enhancement factor (10⁶) for rhodamine (R6G) detection. Our findings highlight the potential of r-AJP as a scalable and cost-effective fabrication strategy for next-generation SERS sensors, paving the way for the development of a new additive manufacturing tool for noble metal material deposition. Full article

Magnetotactic bacteria (MTB), a unique group of Gram-negative prokaryotes, have the remarkable ability to biomineralize magnetic nanoparticles (MNPs) intracellularly, making them promising candidates for various biomedical applications such as biosensors, drug delivery, imaging contrast agents, and cancer-targeted therapies. To fully exploit the potential of MTB, a precise understanding of the structural, surface, and functional properties of these biologically produced nanoparticles is required. Given these concerns, this review provides a focused synthesis of the most widely used microscopic and spectroscopic methods applied in the characterization of MTB and their associated MNPs, covering the latest research from January 2022 to May 2025. Specifically, various optical microscopy techniques (e.g., transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM)) and spectroscopic approaches (e.g., localized surface plasmon resonance (LSPR), surface-enhanced Raman scattering (SERS), and X-ray photoelectron spectroscopy (XPS)) relevant to ultrasensitive MTB biosensor development are herein discussed and compared in term of their advantages and disadvantages. Overall, the novelty of this work lies in its clarity and structure, aiming to consolidate and simplify access to the most current and effective characterization techniques. Furthermore, several gaps in the characterization methods of MTB were identified, and new directions of methods that can be integrated into the study, analysis, and characterization of these bacteria are suggested in exhaustive manner. Finally, to the authors’ knowledge, this is the first comprehensive overview of characterization techniques that could serve as a practical resource for both younger and more experienced researchers seeking to optimize the use of MTB in the development of advanced biosensing systems and other biomedical tools. Full article

A straightforward and economical engraving diode laser with a 455 $\pm$$5$ nm visible wavelength was employed for the first time in a pulsed laser fragmentation in liquid (PLFL) technique coupled simultaneously with a chemical reduction method to synthesize silver nanoparticles (AgNPs) in an Origanum majorana extract liquid, as a natural reduction agent. The chemical reduction correlated with the PLFL method to control the NP size by examining the effect of irradiation times. The AgNPs were characterized by X-Ray diffraction (XRD), UV–vis spectrophotometry, dynamic light scattering (DLS), transmission electron microscopy (TEM), and Fourier transform infrared (FTIR) spectroscopy. The lattice diffraction Bragg’s planes (111), (200), (220), (311), and (222) were found by XRD. The AgNPs had a surface plasmon resonance (SPR) peak at around 432–409 nm. The position of this SPR peak moves toward shorter wavelengths, by around 23 nm, with increased laser irradiation. When exposure times were increased, a drop in Ag NP size was revealed, from 22 nm when only a chemical reduction approach was used to 12 nm when the PLFL technique was associated. The DLS and TEM confirmed the UV–vis results. Such consideration suggests that combining the chemical reduction and PLFL methods could enable the tuning of the Ag NP size to be tailored for specific applications. This work could open the field for synthesizing NPs and controlling their size using an easy and handy engraving laser. Full article