Search Results (1,541)

This review surveys recent advances and emerging prospects in phase-transfer catalysis (PTC) for fuel desulfurization. In response to increasingly stringent environmental regulations, the removal of sulfur from transportation fuels has become imperative for curbing SO_x emissions. Conventional hydrodesulfurization (HDS) operates under severe temperature–pressure conditions and displays limited efficacy toward sterically hindered thiophenic compounds, motivating the exploration of non-hydrogen routes such as oxidative desulfurization (ODS). Within ODS, PTC offers distinctive benefits by shuttling reactants across immiscible phases, thereby enhancing reaction rates and selectivity. In particular, PTC enables efficient migration of organosulfur substrates from the hydrocarbon matrix into an aqueous phase where they are oxidized and subsequently extracted. The review first summarizes the deployment of classic PTC systems—quaternary ammonium salts, crown ethers, and related agents—in ODS operations and then delineates the underlying phase-transfer mechanisms, encompassing reaction-controlled, thermally triggered, photo-responsive, and pH-sensitive cycles. Attention is next directed to a new generation of catalysts, including quaternary-ammonium polyoxometalates, imidazolium-substituted polyoxometalates, and ionic-liquid-based hybrids. Their tailored architectures, catalytic performance, and mechanistic attributes are analyzed comprehensively. By incorporating multifunctional supports or rational structural modifications, these systems deliver superior desulfurization efficiency, product selectivity, and recyclability. Despite such progress, commercial deployment is hindered by the following outstanding issues: long-term catalyst durability, continuous-flow reactor design, and full life-cycle cost optimization. Future research should, therefore, focus on elucidating structure–performance relationships, translating batch protocols into robust continuous processes, and performing rigorous environmental and techno-economic assessments to accelerate the industrial adoption of PTC-enabled desulfurization. Full article

Benzothiazole derivatives have emerged as being highly significant in drug discovery due to their versatile biological activities and structural adaptability. Incorporating nitrogen and sulfur, this fused heterocyclic scaffold exhibits wide-ranging pharmacological properties, including anticancer, antimicrobial, anti-inflammatory, antidiabetic, neuroprotective, and diagnostic applications. A diverse set of clinically approved and investigational compounds, such as flutemetamol for Alzheimer’s diagnosis, riluzole for ALS, and quizartinib for AML, illustrates the scaffold’s therapeutic potential in varied applications. These agents act via mechanisms such as enzyme inhibition, receptor modulation, and amyloid imaging, demonstrating the scaffold’s high binding affinity and target specificity. Advances in synthetic strategies and our understanding of structure–activity relationships (SARs) continue to drive the development of novel benzothiazole-based therapeutics with improved potency, selectivity, and safety profiles. We also emphasize recent in vitro and in vivo studies, including drug candidates in clinical trials, to provide a comprehensive perspective on the therapeutic potential of benzothiazole-based compounds in modern drug discovery. This review brings together recent progress to help guide the development of new benzothiazole-based compounds for future therapeutic applications. Full article

This study investigates the effects of sodium sulfate (Na₂SO₄) dosage, reaction temperature, and processing time on the structural decomposition of complex compounds in copper slag. Experimental results demonstrated that applying 20% Na₂SO₄ achieves an impressive decomposition rate of 89%, highlighting its effectiveness in liberating valuable metals from the slag matrix. The optimal temperature for maximizing fayalite decomposition is determined to be 900 °C, which significantly enhances reaction kinetics and efficiency. Furthermore, extending the reaction time to 90 min resulted in the highest observed decomposition efficiency. Subsequent leaching experiments in sulfuric acid confirmed that the liberated metal transitioned into the solution phase was very effective, ensuring high metal recovery rates. The treated samples demonstrated metal recovery rates of 97% for copper (Cu), 96% for iron (Fe), and 93% for zinc (Zn). In contrast, the untreated samples exhibited considerably lower recovery rates, with copper at 61%, iron at 59%, and zinc at 65%. Additionally, this approach mitigates filtration challenges by preventing the formation of silica gel. These findings provide key operational parameters for optimizing metal recovery from copper slag and establish a solid foundation for advancing sustainable and efficient resource extraction research. Full article

The eight new copper(II), nickel(II), zinc(II), and iron(III) coordination compounds [Cu(L)Cl]₂ (1), [Cu(L)Br]₂ (2), [Cu(L)(NO₃)]₂ (3), [Cu(phen)(L)]NO₃ (4), [Ni(HL)₂](NO₃)₂·H₂O (5), [Ni(HL)₂]Cl₂ (6), [Zn(L)₂]·0.125H₂O (7), and [Fe(L)₂]Cl (8), where HL stands for 2-benzoylpyridine 4-allylthiosemicarbazone, were synthesized and characterized. ¹H, ¹³C NMR, and FTIR spectroscopies were used for characterization of the HL thiosemicarbazone. The elemental analysis, the FTIR spectroscopy, and the study of molar electrical conductivity were used for characterization of the coordination compounds 1–8. Also, the crystal structures of HL, its salts ([H₂L]Cl; [H₂L]NO₃), and complexes 1, 3, 5, 7, and 8 were determined using single-crystal X-ray diffraction analysis. Complexes 5, 7, 8 have mononuclear structures, while copper(II) complexes 1 and 3 have a dimeric structure with the sulfur atoms of the thiosemicarbazone ligand bridging two copper atoms together. Thiosemicarbazone HL and the complexes manifest antibacterial and antifungal activities. The studied substances are more active towards Gram-negative bacteria than towards Gram-positive bacteria and fungi. Complex 1 is the most active one towards Gram-positive bacteria and C. albicans, while the introduction of 1,10-phenanthroline into the inner sphere enhances the activity towards Gram-negative bacteria. Thiosemicarbazone and complexes 6 and 7 manifest antiradical activity that exceeds the activity of Trolox. HL and complex 1 manifest antiproliferative activity towards HL-60 cancer cells which exceeds the activity of their analogs with 2-formyl-/2-acetylpyridine 4-allylthiosemicarbazone. Full article

The occurrence of haze pollution significantly deteriorates air quality and threatens human health, yet persistent knowledge gaps in real-time source apportionment of fine particulate matter (PM_2.5) hinder sustained improvements in atmospheric pollution conditions. Thus, this study employed single-particle aerosol mass spectrometry (SPAMS) to investigate PM_2.5 sources and dynamics during winter haze episodes in Yinchuan, Northwest China. Results showed that the average PM_2.5 concentration was 57 μg·m⁻³, peaking at 218 μg·m⁻³. PM_2.5 was dominated by organic carbon (OC, 17.3%), mixed carbonaceous particles (ECOC, 17.0%), and elemental carbon (EC, 14.3%). The primary sources were coal combustion (26.4%), fugitive dust (25.8%), and vehicle emissions (19.1%). Residential coal burning dominated coal emissions (80.9%), highlighting inefficient decentralized heating. Source contributions showed distinct diurnal patterns: coal combustion peaked nocturnally (29.3% at 09:00) due to heating and inversions, fugitive dust rose at night (28.6% at 19:00) from construction and low winds, and vehicle emissions aligned with traffic (17.5% at 07:00). Haze episodes were driven by synergistic increases in local coal (+4.0%), dust (+2.7%), and vehicle (+2.1%) emissions, compounded by regional transport (10.1–36.7%) of aged particles from northwestern zones. Fugitive dust correlated with sulfur dioxide (SO₂) and ozone (O₃) (p < 0.01), suggesting roles as carriers and reactive interfaces. Findings confirm local emission dominance with spatiotemporal heterogeneity and regional transport influence. SPAMS effectively resolved short-term pollution dynamics, providing critical insights for targeted air quality management in arid regions. Full article

Background: 1,2,3,4,5-pentathiepines (PTEs) are compounds originally identified in marine ascidians and are currently under investigation for their promising pharmacological properties, particularly as potential antineoplastic agents. Objectives: In this study, we investigated the antineoplastic properties of a series of ten indolizine-based PTEs, comprising eight previously reported compounds and two newly synthesized derivatives. Methods: These compounds were evaluated against a panel of human cancer cell lines of diverse tissue origins, as well as, for the first time, on non-cancerous CR9 fibroblasts to assess their cytotoxic selectivity. In addition, their effects were tested on 3D spheroid models, providing preliminary insights into their potential in vivo efficacy. Initial screening focused on cell viability, followed by a more detailed characterization of the most active compounds in terms of their ability to induce apoptosis, necrosis, cell cycle arrest, and reactive oxygen species (ROS) generation. The anti-migratory activity of PTEs and a newly adapted assay to confirm sulfur species release in the cells were also performed for the first time. Results and Conclusions: Our findings reveal that four PTEs bearing hydrophilic, hydrogen-bonding functional groups, particularly the two inspired by natural analogs, exhibited the most potent anticancer activity. Full article

Odors from pet cats can negatively affect the quality of life of cat owners. The diverse bioactive compounds in plant extracts make them a promising candidate for effective odor reduction. This study evaluated twelve plant extracts for deodorizing efficacy via in vitro fermentation tests. Rosemary extract and licorice extract exhibited better deodorizing effects, with fractions of rosemary extract below 100 Da demonstrating the most effective deodorizing performance. Based on these findings, subsequent feeding trials were conducted using rosemary extract and its fractions below 100 Da. In the feeding trial, adult British Shorthair cats were divided into three groups (Control Check, RE, and RE100) and housed in a controlled-environment respiration chamber for 30 days. Measurements included odor emissions, fecal and blood physicochemical parameters, immune parameters, microbiota composition based on 16S rRNA sequencing, and metabolome analysis. The results of the feeding trial indicated that rosemary extract significantly reduced ammonia and hydrogen sulfide emissions (46.84%, 41.64%), while fractions below 100 Da of rosemary extract achieved even greater reductions (55.62%, 53.87%). Rosemary extract regulated the intestinal microbial community, significantly increasing the relative abundance of the intestinal probiotic Bifidobacterium (p < 0.05) and reducing the population of sulfate-reducing bacteria (p < 0.05). It also significantly reduced urease and uricase activities (p < 0.05) to reduce ammonia production and inhibited the degradation of sulfur-containing proteins and sulfate reduction to reduce hydrogen sulfide emissions. Furthermore, rosemary extract significantly enhanced the immune function of British Shorthair cats (p < 0.05). This study suggests that rosemary extract, particularly its fractions below 100 Da, is a highly promising pet deodorizer. Full article

The aim of this study was to evaluate differences in the physicochemical characteristics, fatty acid profiles and volatile compounds of different muscle types (semimembranosus (SM), biceps femoris (BF) and semitendinosus (ST)) used to produce dry-cured Bísaro ham. Sixteen dry-cured hams were used. The physicochemical parameters were significantly affected by the muscle type, with the differences being mainly related to the different drying degrees and the intramuscular fat and collagen contents of the fresh muscles. Additionally, the type of muscle had a significant influence on the polyunsaturated fatty acids, such that the muscle with the highest fat content (ST) had the lowest PUFA content and vice versa. There were strong significant differences in the total content of volatile compounds derived from the Strecker reaction, which was higher in the ST muscle, and in the proportions of these compounds with different functional groups. The amount of sulfur compounds was also affected by the muscle type and was higher in the SM muscle. Due to the great impact of Strecker-derived and sulfur compounds on the flavor of the cured hams, these differences would affect the flavor perception of the different muscles. The variability between muscles in composition, fatty acids and volatile compounds allowed for discrimination of the samples by muscle type using multivariate analysis. Full article

Drought conditions impact plants at the morphological, physiological, and molecular levels. Plant tolerance to drought conditions is frequently associated with maintaining proteome stability, highlighting the significance of proteomic analysis in understanding the mechanisms underlying plant resilience. Here, we performed proteomic and peptidomic analysis of spring wheat (Triticum aestivum L.) under drought stress conditions. Using isobaric tags for relative and absolute quantitation (iTRAQ), we identified 497 and 157 differentially abundant protein (DAP) groups in leaves and roots, respectively. The upregulated DAP groups in leaves were primarily involved in stress responses, such as oxidative stress and heat response, whereas those in roots were associated with responses to water deprivation and sulfur compound metabolic processes. The analysis of the extracellular root peptidome revealed 2294 native peptides, including members of small secreted peptide (SSP) families. In the peptidomes of stress-induced plants, we identified 16 SSPs as well as peptides derived from proteins involved in cell wall catabolism, intercellular signaling, and stress response. These peptides represent potential candidates as regulators of drought responses. Our results help us to understand adaptation mechanisms and develop new agricultural technologies to increase productivity. Full article

Spice by-products, often discarded as waste, represent an untapped resource for sustainable packaging solutions due to their unique, multifunctional, and bioactive profiles. Unlike typical plant residues, these materials retain diverse phytochemicals—including phenolics, polysaccharides, and other compounds, such as essential oils and vitamins—that exhibit controlled release antimicrobial and antioxidant effects with environmental responsiveness to pH, humidity, and temperature changes. Their distinctive advantage is in preserving volatile bioactives, demonstrating enzyme-inhibiting properties, and maintaining thermal stability during processing. This review encompasses a comprehensive characterization of phytochemicals, an assessment of the re-utilization pathway from waste to active materials, and an investigation of processing methods for transforming by-products into films, coatings, and nanoemulsions through green extraction and packaging film development technologies. It also involves the evaluation of their mechanical strength, barrier performance, controlled release mechanism behavior, and effectiveness of food preservation. Key findings demonstrate that ginger and onion residues significantly enhance antioxidant and antimicrobial properties due to high phenolic acid and sulfur-containing compound concentrations, while cinnamon and garlic waste effectively improve mechanical strength and barrier attributes owing to their dense fiber matrix and bioactive aldehyde content. However, re-using these residues faces challenges, including the long-term storage stability of certain bioactive compounds, mechanical durability during scale-up, natural variability that affects standardization, and cost competitiveness with conventional packaging. Innovative solutions, including encapsulation, nano-reinforcement strategies, intelligent polymeric systems, and agro-biorefinery approaches, show promise for overcoming these barriers. By utilizing these spice by-products, the packaging industry can advance toward a circular bio-economy, depending less on traditional plastics and promoting environmental sustainability in light of growing global population and urbanization trends. Full article

This study investigates the chemical stability and leaching behavior of two environmentally sustainable EPDM elastomers filled with circular carbon black (CCB) and recycled carbon black (RCB) when exposed to acidic, fuel cell-like environments. Accelerated aging tests were conducted in sulfuric acid solutions of varying concentrations (1 M, 0.1 M, and 0.001 M) at 90 °C for 1000 h to simulate long-term degradation in proton exchange membrane fuel cell (PEMFC) sealing applications. Complementary hot water extraction tests (HWET) were performed at 80 °C for up to 168 h to evaluate ionic leaching via conductivity measurements. HPLC-DAD analysis was used to assess organic leachates, while surface changes were examined by SEM and thermal transitions by DSC. Results revealed lower leaching and improved surface preservation in the CCB-filled EPDM, which remained below the critical 5 µS/cm ionic conductivity threshold for longer durations than its RCB counterpart. HPLC results showed filler-dependent trends in organic compound release, with CCB EPDM exhibiting higher leaching only under strong acid exposure. SEM confirmed greater surface damage and porosity in RCB EPDM. Overall, both materials demonstrated adequate chemical resistance, but the CCB formulation exhibited superior long-term stability, supporting its use in sustainable PEMFC sealing applications. Full article

The global problem of antibiotic resistance leads to the necessity for drug improvement and discovery. Natural and synthetic sulfur-containing compounds have been known as antibiotics for many years. In the current study, we demonstrated an antibacterial activity of three new thiosulfonates: S-ethyl 4-aminobenzene-1-sulfonothioate (1), S-methyl 4-acetamidobenzene-1-sulfonothioate (2), and S-ethyl 4-acetamidobenzene-1-sulfonothioate (3). Their activities were studied on two model Gram-positive and Gram-negative bacteria strains: Staphylococcus aureus ATTC 6538P and Escherichia coli ATTC 8739, respectively. According to the literature data, we proposed a general mechanism of 1−3 biochemical actions. To analyze its feasibility, theoretical studies using density functional theory (DFT) were performed. The obtained results demonstrate a direct correlation between some NBO parameters and the S-S bond energy of 1−3 with their activity against both studied bacterial strains. The obtained results could be helpful for future biomedical studies on the analyzed compounds and promote the further design of new S-containing antibiotics. Full article

A previously pyrometallurgical process, developed to obtain a Pb-Ag alloy and a slag rich in sulfur from the recycling of a mixture of industrial wastes of jarosite and lead paste, was thermodynamically assessed at 1200 °C. The industrial jarosite sourced from a Mexican zinc hydrometallurgical plant corresponded to an ammonium jarosite with a measurable silver content. The specific heat capacity (Cp) of the ammonium jarosite was obtained from TGA and DSC measurements, as well as the thermodynamic functions of enthalpy, entropy, and Gibbs free energy. The Cp was successfully modeled using polynomial regression, with a second-degree polynomial employed to describe the low-temperature behavior. The thermodynamic data generated were input into the thermodynamic software FactSage 8.2 for modeling of the lead paste–ammonium jarosite-Na₂CO₃-SiC system and represented by stability phase diagrams. The thermodynamic assessment of the pyrometallurgical process predicted compounds formed at high temperatures, showing that a Pb-Ag alloy and a slag rich in Na, S, and Fe (NaFeS₂ and NaFeO₂) were obtained. The compounds formed evidence of the effective sulfur retention in the slag, which is crucial for mitigating SO₂ emissions during high-temperature treatments. The experimental compounds, after solidification, were determined by X-ray diffraction measurements to be Na₂Fe(SO₄)₂ and Na₂(SO₄), which reasonably match the thermodynamic assessment. The heat capacity of the ammonium jarosite provides essential thermodynamic insights into the compositional complexities of industrial waste, which are particularly relevant for thermodynamic modeling and process optimization in pyrometallurgical systems aimed at metal recovery and residue valorization. Full article

Flotation was investigated to treat incineration fly ash with diesel, kerosene, TX-100, or SDS as a collector and methyl isobutyl carbinol (MIBC) or 2-Octyl alcohol as a frother. Fly ash was separated into light and residual materials. Comparison of yield, carbon and sulfur removal showed that kerosene and MIBC showed the best performance. The results revealed that flotation was a method that could simultaneously achieve the removal of organics and S-containing compounds. Specifically, approximately 7.63–9.45% of the total mass was collected as light material, which was enriched with organic carbon. Contents of organic carbon reached 14.35 wt%–14.56 wt% in the light materials from those of 2.74 wt%–3.52 wt% in the original fly ash. Elemental analysis further proved that sulfur was also accumulated in light material. Approximately 78.84–81.69% of the organic carbon and 80.47–82.66% of the sulfur were removed. Decarbonization was primarily achieved through the flotation of organic materials, while desulfurization resulted from both flotation and the dissolution of soluble salts. Furthermore, the contents of the chloride and heavy metals in the residual fly ash also decreased. Particle size analysis showed that flotation was effective in the removal of smaller particles, and those particles were also rich in heavy metals. Overall, by selecting the right collector and frother, flotation was also able to reduce the leaching toxicity of heavy metals. The residual fly ash was safe for further disposal. Organic carbon, sulfur and heavy metals were accumulated in the light materials, which accounted for less than 10% of the original mass. The portion of fly ash needing further treatment was therefore greatly reduced. Full article

Agresto is the unfermented juice traditionally obtained from boiled unripe grapes, typically using fruit that would otherwise be discarded, and enriched with spices, herbs, and fruit. In this study, the phenolic profile, antioxidant and antibacterial activity, and volatile organic compounds (VOCs) of Agresto produced from two grape varieties (Sangiovese, and Vermentino) harvested in Mount Amiata (Tuscany) were evaluated. Agresto from Vermentino showed a higher total phenolic content (TPC), 1.31 mg GAE/mL, as well as a greater total flavonoid and flavonol content and FRAP activity compared to Agresto from Sangiovese. The highest ORAC value was observed in Agresto from Vermentino, 41.01 mg TE/mL, compared to that from Sangiovese. TPC, flavonols, apocarotenes, sulfur derivatives, and non-terpene derivatives were positively correlated with antimicrobial activity against E. coli, FRAP, and ORAC. Overall, our results showed that grape variety significantly influences the chemical composition of Agresto, particularly in terms of both VOCs and phenolic compounds. The observed variations in phenolic composition also affected the antioxidant and antimicrobial activity of Agresto. These experimental findings clearly suggest the utmost importance of identifying the optimal chemical profile of “unripe grapes” used as raw material for Agresto production, considering both variety and the specific ripening degree achievable through vine green harvesting. Full article