Search Results (80)

Surface Acoustic Wave (SAW) technology, long central to analog signal processing and RF filtering, is undergoing a major renewal. Driven by advances that decouple SAWs from traditional piezoelectric materials and fixed-function devices, the field is gaining unprecedented control over acoustic, optical, and electronic interactions at the micro and nanoscale. This review synthesizes these developments across four fronts: new physical mechanisms for SAW manipulation, emerging material platforms, ranging from thin films to 2D systems, along with reconfigurable device architectures and circuits, and the expanding landscape of applications they enable. Optical methods are reshaping how SAWs are generated and controlled, bypassing the limits of conventional electromechanical coupling. Coherent optical excitation of high-Q SAW cavities via Brillouin-like optomechanical interactions now grants access to modes in non-piezoelectric substrates such as diamond and silicon, while on-chip SAW excitation in photonic waveguides through backward stimulated Brillouin scattering opens new integrated sensing routes. In parallel, magneto-acoustic experiments have revealed nonreciprocal SAW diffraction from resonant scattering in magnetoelastic gratings. On the device side, ZnO thin-film transistors integrated on LiNbO₃ exploit acoustoelectric coupling to realize voltage-tunable phase shifters; UHF Z-shaped delay lines achieve high sensitivity in a compact footprint; and parametric synthesis of wideband, multi-stage lattice filters targets 5G-class performance. Atomistic simulations show that SAW propagation in 2D MXene films can be engineered via surface terminations, while aerosol jet printing and SAW-assisted particle patterning provide agile, cleanroom-light fabrication of microfluidic and magnetic components. These advances enable applications ranging from hybrid quantum systems and quantum links to lab-on-a-chip particle control, SBS-based and UHF sensing, reconfigurable RF front-ends, and soft robotic actuators based on patterned magnetic composites. At the same time, optical techniques offer non-contact probes of dissipation, and MXenes and other emerging materials open new regimes of acoustic control. Conclusively, they are transforming SAW technology into a versatile, programmable platform for mediating complex interactions in next-generation electronic, photonic, and quantum systems. Full article

We investigate the optical response properties of an atom-assisted spinning optomechanical system, in which a spinning optical resonator is coupled simultaneously to a two-level atomic ensemble and a mechanical resonator driven by a weak pump field. Remarkably, we demonstrate that by simply reversing the rotation direction, the system can be switched between a low-absorption electromagnetic and optomechanically induced transparency state and a high-absorption state, constituting a form of non-reciprocal optical control at the quantum level. Furthermore, by tuning the phase difference between the mechanical pump and the probe field, direction-dependent switching between absorption and gain is achieved. These non-reciprocal effects originate from the Sagnac-induced frequency shift in the optical mode, which leads to distinct optomechanical and atom–cavity couplings for opposite spinning directions. We also show that the absorption spectrum can be modulated by the angular velocity and the atomic number. Our results indicate that the optical properties of the hybrid system can be manipulated via the angular velocity, phase difference, and atom number, with potential applications in chiral photonic communications. Full article

To address the issue of normal displacement deviation induced by the geometric nonlinearity of cross-spring flexural pivots in pendulum-type interferometers, which leads to modulation attenuation, this study proposes a co-simulation method combining Finite Element Analysis (FEA) and Physical Optics. First, an optomechanical model was established based on the retroreflective property of cube-corner prisms and a double-pendulum differential scanning architecture (where the optical path difference is four times the mechanical displacement). Using the ANSYS Workbench 2022 R1 transient dynamics module with the “Large Deflection” algorithm enabled, the nonlinear motion trajectories of single-pivot and dual-pivot flexural hinges were quantitatively compared. Subsequently, a multi-physics data mapping interface was established to map mechanical motion errors into a physical optics simulation model, where the interference modulation was accurately calculated via electromagnetic field tracing. Results demonstrate that under ambient temperature (25 °C) and a spectral resolution of 1 cm⁻¹, the normal displacement deviation of the single-pivot hinge is only 0.00165 mm, representing a 95.6% reduction compared to the dual-pivot structure (0.03765 mm). Furthermore, the modulation of the single-pivot structure remains above 0.98 throughout the scanning range, significantly outperforming the nonlinear decay characteristic of the dual-pivot structure. These findings provide a theoretical basis for the structural optimization and selection of high-precision portable FTIR spectrometers. Full article

We investigate a double-probe-field-driven cavity optomechanical system with a degenerate optical parametric amplifier (OPA). When the system is in a mechanical PT-symmetric case, we study the generation mechanism of the sum sideband and how to enhance the generation efficiency of the sum sideband by controlling parametric interactions. Our model consists of two directly coupled PT-symmetric mechanical resonators, which are coupled to a Fabry–Pérot cavity equipped with an optical parametric amplifier. Research indicates that in a PT-symmetric mechanical resonator, there exist special exceptional points (EPs). Near EPs, the generation efficiency of the sum sideband is significantly enhanced. Notably, the introduction of an OPA can remarkably boost the efficiency of sum sideband generation (SSG) and establish a new sideband matching condition for the upper sum sideband. We conduct a detailed analysis of the dependence of SSG on system parameters, such as mechanical coupling strength, OPA nonlinear gain, OPA pump light field phase, and probe field frequency detuning. The research reveals that even with a weak driving field, a significantly enhanced efficiency of SSG can be achieved by adjusting the OPA gain coefficient and phase. This research offers new insights into enhancing or regulating light propagation in nonlinear optomechanical devices and holds potential for applications in high-precision measurement and optical communication. Full article

Surface accuracy is a crucial evaluation criterion for the life cycle performance of optical components. Throughout the assembly process, the optical surface undergoes deformation due to applied assembly stresses, causing the actual surface profile to deviate from the intended design. The key to the quantitative optimization of the adhesive bonding assembly process is to elucidate the quantitative coupling mechanism between assembly stress and optical surface deformation and to establish a corresponding quantitative relationship. To address this, a comprehensive study into the optical surface deformation of multi-point adhesive bonded flat optical components is presented. Firstly, the coupled influence mechanisms governing optical surface deformation are analyzed considering both the components properties and assembly parameters, and this mechanistic analysis includes dimensionless modeling, boundary conditions analysis, and reliable design requirement analysis. Secondly, based on the understanding of mechanisms, a quantitative approximation method is developed to predict the deformation patterns within the critical central region (50% aperture) of optical components subjected to multi-point bonding. Finally, the quantitative approximation for the assembly-induced surface deformation is experimentally validated. Through this research, the surface deviation during the multi-point adhesive bonding assembly of flat optical components can be effectively approximated, holding significant importance for further imaging quality prediction and assembly parameters optimization during assembly process, and facilitating a further performance improvement for optical instruments. Full article

We report on the non-contact characterization of various plate materials (including aluminum and steel) using a high-pressure, micrometer-scale air jet as a broadband ultrasound source and an optomechanical microphone as a receiver. Through-plate transmission spectra are dominated by zero-group-velocity (ZGV) Lamb modes. We attribute this to the ‘point-like’ nature of both the source and receiver, since ZGV modes are spatially localized and comprise a range of non-normal wave numbers. As is well known, the properties of the ZGV modes, including their frequency and amplitude, are sensitive to thickness variations or the presence of defects. The continuous nature and high acoustic power of the gas jet source enabled us to perform uninterrupted scanning of non-uniform steel plates. Given the ubiquitous and low-cost nature of compressed air systems, our approach might be of interest for the rapid inspection of industrial parts. Full article

We observed vibrational eigenmodes for a variety of millimeter-scale objects, including glass and sapphire lenses, by placing them on a piezoelectric ‘shaker’ driven by a broadband noise or frequency sweep signal, and using an optomechanical microphone to pick up their vibrational signatures emitted into the surrounding air. High-quality vibrational modes were detected over the ~0–8 MHz range for a typical object–microphone spacing of 1–10 mm. The observed eigenfrequencies are shown to be in excellent agreement with numerical predictions. Non-contact detection of resonant vibrational eigenmodes in the MHz ultrasound range could find application in the quality control of numerous industrial parts, such as ball bearings and lenses. Full article

To improve the efficiency and stability of the system, this paper proposes a monolithic integrated optical path design for a cavity optomechanical accelerometer based on a 250 nm top silicon thickness silicon-on-insulator (SOI) wafer instead of readout through U-shape fiber coupling. Finite Element Analysis (FEA) and Finite-Difference Time-Domain (FDTD) methods are employed to systematically investigate the performance of key optical structures, including the resonant modes and bandgap characteristics of photonic crystal (PhC) microcavities, transmission loss of strip waveguides, coupling efficiency of tapered-lensed fiber-to-waveguide end-faces, coupling characteristics between strip waveguides and PhC waveguides, and the coupling mechanism between PhC waveguides and microcavities. Simulation results demonstrate that the designed PhC microcavity achieves a quality factor (Q-factor) of 2.26 × 10⁵ at a 1550 nm wavelength while the optimized strip waveguide exhibits a low loss of merely 0.2 dB over a 5000 μm transmission length. The strip waveguide to PhC waveguide coupling achieves 92% transmittance at the resonant frequency, corresponding to a loss below 0.4 dB. The optimized edge coupling structure exhibits a transmittance of 75.8% (loss < 1.2 dB), with a 30 μm coupling length scheme (60% transmittance, ~2.2 dB loss) ultimately selected based on process feasibility trade-offs. The total optical path system loss (input to output) is 5.4 dB. The paper confirms that the PhC waveguide–microcavity evanescent coupling method can effectively excite the target cavity mode, ensuring optomechanical coupling efficiency for the accelerometer. This research provides theoretical foundations and design guidelines for the fabrication of high-precision monolithic integrated cavity optomechanical accelerometers. Full article

We provide an approach to detect a nitrogen-vacancy (NV) center, which might be a defect in a diamond nanomembrane, using a dual-coupling optomechanical system. The NV center modifies the energy-level structure of a dual-coupling optomechanical system through dressed states arising from its interaction with the mechanical membrane. Thus, we study the photon blockade in the cavity of a dual-coupling optomechanical system in which an NV center is embedded in a single-crystal diamond nanomembrane. The NV center significantly influences the statistical properties of the cavity field. We systematically investigate how three key NV center parameters affect photon blockade: (i) its coupling strength to the mechanical membrane, (ii) transition frequency, and (iii) decay rate. We find that the NV center can shift, give rise to a new dip, and even suppress the original dip in a bare quadratic optomechanical system. In addition, we can amplify the effect of the NV center on photon statistics by adding a gravitational potential when the NV center has little effect on photon blockade. Therefore, our study provides a method to detect diamond nanomembrane defects in a dual-coupling optomechanical system. Full article

Current temperature sensors require regular recalibration to maintain reliable temperature measurement. Photonic/quantum-based approaches have the potential to radically change the practice of thermometry through provision of in situ traceability, potentially through practical primary thermometry, without the need for sensor recalibration. This article gives an overview of the European Partnership in Metrology (EPM) project: Photonic and quantum sensors for practical integrated primary thermometry (PhoQuS-T), which aims to develop sensors based on photonic ring resonators and optomechanical resonators for robust, small-scale, integrated, and wide-range temperature measurement. The different phases of the project will be presented. The development of the integrated optical practical primary thermometer operating from 4 K to 500 K will be reached by a combination of different sensing techniques: with the optomechanical sensor, quantum thermometry below 10 K will provide a quantum reference for the optical noise thermometry (operating in the range 4 K to 300 K), whilst using the high-resolution photonic (ring resonator) sensor the temperature range to be extended from 80 K to 500 K. The important issues of robust fibre-to-chip coupling will be addressed, and application case studies of the developed sensors in ion-trap monitoring and quantum-based pressure standards will be discussed. Full article

In an optomechanical system (OMS), the dynamics of quantum correlations, e.g., quantum discord, can witness synchronized squeezing between the cavity and mechanical modes. We investigate an OMS driven by two coherent fields, and demonstrate that optimal quantum correlations and squeezing synchronization can be achieved by carefully tuning key parameters: the cavity-laser detunings, loss rates, and the effective coupling ratio between the optomechanical interaction and the amplitude drive. By employing the steady-state solution of the covariance matrix within the Lyapunov framework, we identify the conditions under which squeezing becomes stabilized. Furthermore, we demonstrate that synchronized squeezing of the cavity and mechanical modes can be effectively controlled by tuning the loss ratio between the cavity and mechanical subsystems. Alternatively, in the case where the cavity is driven by a single field, we demonstrate that synchronized squeezing in the conjugate quadratures of the cavity and mechanical modes can still be achieved, provided that the cavity is coupled to a squeezed reservoir. The presence of this engineered reservoir compensates the absent driving field, by injecting directional quantum noise, thereby enabling the emergence of steady-state squeezing correlations between the two modes. A critical aspect of our study reveals how the interplay between dissipative and driven-dispersive squeezing mechanisms governs the system’s bandwidth and robustness against decoherence. Our findings provide a versatile framework for manipulating quantum correlations and squeezing in OMS, with applications in quantum metrology, sensing, and the engineering of nonclassical states. This work advances the understanding of squeezing synchronization and offers new strategies for enhancing quantum-coherent phenomena in dissipative environments. Full article

The photon blockade effect, as a quantum behavior in cavity optomechanics, has certain limitations, including stringent requirements for system parameters and technical difficulties in achieving strong nonlinear interactions. This paper proposes a novel scheme that aims to achieve strong nonlinear effects through introducing the degenerate optical parametric amplifier (OPA) and mechanical squeezing. These enhanced nonlinear effects can significantly improve the photon blockade effect, effectively overcoming the limitations of weak coupling. Our theoretical analysis demonstrates the successful realization of an ideal single-photon blockade (1PB) state through optimized parameter conditions. Additionally, this joint approach significantly enhances the two-photon blockade (2PB) effect and broadens the region where 2PB occurs. This finding helps us identify the optimal system parameters to maximize two-photon emission efficiency. By precisely controlling these parameters, a new pathway is opened for more flexible manipulation and utilization of the photon blockade effect in experiments. Full article

In recent years, research on light-matter interactions in silicon-based micro/nano cavity optomechanical systems demonstrates high-resolution sensing capabilities (e.g., sub-fm-level displacement sensitivity). Conventional 2D photonic crystal (PhC) cavity optomechanical sensors face inherent limitations: thin silicon layers (200–300 nm) restrict both the mass block (critical for thermal noise suppression) and optical Q-factor. Enlarging the detection mass in such thin layers exacerbates in-plane height nonuniformity, severely limiting high-precision sensing. This study proposes a 500 nm thick silicon-based 2D slot-type PhC cavity design for advanced sensing applications, fabricated on a silicon-on-insulator (SOI) substrate with optimized air slot structures. Systematic parameter optimization via finite element simulations defines structural parameters for the 1550 nm band, followed by 6 × 6 × 6 combinatorial experiments on lattice constant, air hole radius, and line-defect waveguide width. Experimental results demonstrate a loaded Q-factor of 57,000 at 510 nm lattice constant, 175 nm air hole radius, and 883 nm line-defect waveguide width (measured sidewall angle: 88.4°). The thickened silicon layer delivers dual advantages: enhanced mass block for thermal noise reduction and high Q-factor for optomechanical coupling efficiency, alongside improved ridge waveguide compatibility. This work advances the practical development of CMOS-compatible micro-opto-electromechanical systems (MOEMS). Full article

We investigate steady-state entanglement in a hybrid optomechanical cavity coupled to a Rydberg atomic ensemble confined within a single blockade region. The ensemble behaves as one superatom due to the rigid dipole blockade effect. Through optomechanical coupling, three types of bipartite entanglement emerge among the cavity, the Rydberg superatom, and the movable mirror. As the principal quantum number of the Rydberg atoms increases (leading to reduced atomic decay rates), the direct cavity–mirror coupling entanglement is redistributed into direct cavity–superatom coupling entanglement and indirect superatom–mirror coupling entanglement. Counterintuitively, this redistribution culminates in the complete suppression of two direct coupling entanglements, leaving only the indirect coupling entanglement persistent under resonant Stokes sideband conditions. Systematic parameter tuning reveals entanglement transfer pathways and establishes the preference of the superatom–mirror entanglement for specific principal quantum numbers. Furthermore, we demonstrate the thermal robustness of the surviving entanglement up to experimentally accessible temperatures. These findings advance the understanding of quantum entanglement in hybrid quantum systems and suggest applications in quantum information processing. Full article

A platform for converting near-infrared (NIR) laser power modulation into the self-mixing (SM) signal of a quantum cascade laser (QCL) operating at terahertz (THz) frequencies is introduced. This approach is based on laser feedback interferometry (LFI) with a THz QCL using a metal-coated silicon nitride trampoline membrane resonator as both the external QCL laser cavity and the mechanical coupling element of the two-laser hybrid system. We show that the membrane response can be controlled with high precision and stability both in its dynamic (i.e., piezo-electrically actuated) and static state via photothermally induced NIR laser excitation. The responsivity to nanometric external cavity variations and robustness to optical feedback of the QCL LFI apparatus allows a highly sensitive and reliable transfer of the NIR power modulation into the QCL SM voltage, with a bandwidth limited by the thermal response time of the membrane resonator. Interestingly, a dual information conversion is possible thanks to the accurate thermal tuning of the membrane resonance frequency shift and displacement. Overall, the proposed apparatus can be exploited for the precise opto-mechanical control of QCL operation with advanced applications in LFI imaging and spectroscopy and in coherent optical communication. Full article