Search Results (45)

This paper utilizes the Laplace–Adomian decomposition method to numerically investigate the highly dispersive bright soliton solutions in twin-core optical couplers that employ metamaterials as waveguides. The focus of the study is on the power-law self-phase modulation. The results of the simulations and the accompanying error analysis demonstrate exceptional accuracy for this numerical approach. These findings suggest that the Laplace–Adomian decomposition method is a robust tool for tackling complex nonlinear problems in optical systems. Furthermore, the implications of this research could pave the way for advancements in the design and optimization of metamaterial-based waveguides, potentially leading to improved performance in applications, such as telecommunications and sensing technologies. Full article

Owing to the intricate mechanical coupling characteristics and the considerable difficulty in extracting synergistic spatio-temporal features from high-dimensional sensor data under fluctuating alternating loads, this study proposes a robust anomaly detection framework that combines Normalized Mutual Information (NMI) and Spatio-Temporal Graph Neural Networks (STGNN). First, NMI is utilized to quantify the nonlinear physical coupling intensity among multi-source sensors, thereby filtering out weakly correlated noise and reconstructing the spatial topological structure of the coupler system. Subsequently, a deep learning architecture incorporating Graph Convolutional Networks (GCN), Gated Recurrent Units (GRU), and one-dimensional convolutional residual connections is developed to capture the dynamic evolutionary characteristics of equipment states across both spatial interactions and temporal sequences. Finally, based on the model’s health-state predictions, a moving average algorithm is introduced to smooth the residual sequences, and an anomaly early-warning baseline is established in conjunction with the 3σ criterion. Experimental validation conducted using field service data from heavy-haul trains demonstrates that, compared to conventional serial CNN and Long Short-Term Memory (LSTM) models, the proposed method exhibits superior fitting performance and robustness against noise, effectively reducing the false alarm rate within normal working intervals. In a real-world case study, the method successfully identified variations in spatial linkage features induced by local damage and triggered timely alerts. Notably, the spatial alarm nodes were highly consistent with the fatigue crack initiation sites identified through on-site magnetic particle inspection. This study provides a viable data-driven analytical framework for the condition monitoring and anomaly identification of critical load-bearing components in heavy-haul trains. Full article

The distributor valve is one of the most important components in the pneumatic braking system of trains. It performs the functions of filling and releasing the brake cylinder. The distributor valve most widely used on Bulgarian railways operates in two positions, respectively, in “freight train” mode (G) and in “passenger train mode” (P). The difference between them is determined by the different times for filling and emptying the brake cylinder. These times affect the moment of engagement of the braking system of each wagon in the train composition. This has a significant impact on the longitudinal forces obtained in the couplers. This paper is dedicated to the analysis of the influence of the distributor valve position on the longitudinal forces. A simulation study of the longitudinal behavior of a train set was carried out in Simulink^®, which consists of a locomotive and 43 freight wagons attached to it, with 80 t gross mass of each wagon. The railway cars are linked by elastic elements with nonlinear characteristics. The results represent the distribution of longitudinal forces in time. They are used for the investigation of the longitudinal dynamics of the train, with the aim of improving the running-dynamic qualities of the train during braking. Full article

The current study examines optical soliton solutions in a complicated system of metamaterial-based optical solutions coupled with extremely dispersive couplers. The conformable fractional derivative (CFD) influences the nonlinear refractive index, which is governed by a parabolic equation. Some soliton solutions are extracted, like bright, singular solitons, and singular periodic ones; also, Weierstrass elliptic doubly periodic, and several other exact solutions are systematically revealed by the study using the modified extended direct algebraic method. The findings shed important light on the many solitons in these intricate systems and the interactions between nonlinearity, dispersion, and metamaterial properties. The findings have significance beyond advancing our theoretical understanding of soliton behavior in metamaterial-based optical couplers; they might influence the advancement and development of optical communication technologies and systems. Complementary 2D and 3D representations show how stability parameters change throughout various dynamical regimes and confirm solution consistency. In order to comprehend the complex nonlinear phenomena of this system and its possible practical applications, this paper offers a comprehensive theoretical framework. Full article

We conducted a comprehensive experimental investigation of dual-wavelength switching of 1560 nm, 75 fs pulses (referred to as signal) driven by 1030 nm, 270 fs pulses (referred to as control) using two dual-core fibers with high refractive index contrast and different levels of asymmetry. The study explores the influence of fiber length, control pulse energy, and control-signal pulse delay on switching performance. For the fiber with higher dual-core asymmetry, we achieved an exceptional switching contrast of 41.6 dB at a 14 mm fiber length, exhibiting a homogeneous character within the spectral range of 1450–1650 nm. In contrast, the study of the weaker dual-core asymmetry fiber revealed a maximum switching contrast of 10.7 dB at a 22 mm fiber length, albeit under lower control pulse energy. These observations confirm that the switching mechanism is based on the nonlinear balancing of dual-core asymmetry, wherein the control pulse induces an enhancement of the effective refractive index in the fast fiber core, facilitating the switching of the signal pulse. This work demonstrates high switching contrasts with only a 0.4–0.6 nJ control pulse energy requirement, providing experimental confirmation of a previously reported theoretical model. For the first time, the dual-wavelength switching performance of dual-core fibers with varying levels of asymmetry is compared. The results reveal key directions for the further development of dual-core fibers in view of their potential applications. Full article

We present an analytical and numerical study of nonlinear wave localization in a one-dimensional rhombic (diamond) waveguide array that combines forward- and backward-propagating channels. This mixed-index configuration, realizable through Bragg-type couplers or corrugated waveguides, produces a tunable spectral gap and supports nonlinear self-localized states in both transmission and forbidden-band regimes. Starting from the full set of coupled-mode equations, we derive the effective evolution model, identify the role of coupling asymmetry and nonlinear coefficients, and obtain explicit soliton solutions using the method of multiple scales. The resulting envelopes satisfy a nonlinear Schrödinger equation with an effective nonlinear parameter $\theta$, which determines the conditions for soliton existence ($\theta >0$) for various combinations of focusing and defocusing nonlinearities. We distinguish solitons formed outside and inside the bandgap and analyze their dependence on the dispersion curvature and nonlinear response. Direct numerical simulations confirm the analytical predictions and reveal robust propagation and interactions of counter-propagating soliton modes. Order-of-magnitude estimates show that the predicted effects are accessible in realistic integrated photonic platforms. These results provide a unified theoretical framework for soliton formation in mixed-index lattices and suggest feasible routes for realizing controllable nonlinear localization in Bragg-type photonic structures. Full article

Time- and space-resolved radiation emitted by the plasma produced by a 0.8 ns duration at full width half maximum, ~600 MW maximum power microwave (~9.6 GHz) pulse traversing a hydrogen-, helium-, or air-filled circular waveguide, is studied. Gas ionization by microwaves is an old subject but the regime investigated in the present experimental research, of very high-power microwaves and very short pulses using modern diagnostic tools, is new and follows a series of new studies performed so far only in our laboratory, revealing non-linear phenomena never observed before. In the present research, plasma radiation is observed along a slit made in a circular waveguide wall by either an intensified fast frame camera or a streak camera. Using calibrated input and output couplers, the transmission and reflection coefficients of the high-power microwaves were determined over a broad range of gas pressures, 0.1 kPa < P < 90 kPa. It was found that the intensity of the plasma light emission increases significantly after the high-power microwave pulse has left the waveguide. Depending on pressure, the radiation is either uniform along the slit, while the front of the emitted light follows the microwave pulse at a velocity close to its group velocity, or it remains in the vicinity of the input window, indicating that the plasma density is above critical density. It was also found that the radial distribution of radiation depends on pressure. At pressures <10 kPa, when the electron oscillatory energy reaches 20 keV close to the waveguide axis, light emission forms faster near the waveguide walls, where the ionization rate is maximal. Otherwise, when pressure is >80 kPa, light emission is most intense on the axis where the electron oscillatory energy is ~100 eV and the ionization rate is maximal. We also studied the UV radiation from the plasma, the duration of which was found to be longer than the duration of visible light emission. This indicates the existence of energetic electrons for tens of ns after the high-power microwave pulse has left the observation region. Considering that the emitted light intensity depends on the plasma density and temperature, the observed data may be used for a comparison with the results of collisional radiative models if the electron time and spatial energy distribution is known. Full article

This paper presents a highly linear one-bit loaded-line phase shifter that leverages PIN diodes in combination with a coupler-based impedance transformer. The proposed phase shifter adopts a loaded-line topology, where PIN diodes are configured in a parallel-to-ground arrangement to improve linearity performance. To further enhance linearity, a coupler-based impedance transformer is employed to reduce the impedance seen by each PIN diode, thereby minimizing nonlinear behavior. To demonstrate the effectiveness of this design, a one-bit digital phase shifter is developed, simulated, and fabricated to achieve a 45-degree phase shift at 2 GHz. Experimental measurements confirm an input third-order intercept point (IIP3) exceeding 100 dBm under a range of test conditions, validating the proposed architecture’s linearity advantages. Full article

In this study, a novel mechanical fluid–structure interaction (FSI) model is developed to analyze and discuss high-pressure hydrogen flow in a quick coupler under various operating conditions. The transient-state behavior is investigated with respect to different temperatures, hydrogen pressures, and O-ring thicknesses, which directly affect the compression and deformation of the seal. High-pressure hydrogen flow, which may lead to seal damage or failure, is of growing concern due to the increasing use of hydrogen in refueling stations, a sector expected to play a key role in the future of clean energy infrastructure. This study aims to introduce a coupled multiphysics approach by integrating the Finite Element Method (FEM) for solid mechanics with the Finite Volume Method (FVM) for hydrogen flow modeling. The coupling model shows nonlinear interactions between flowing hydrogen and the deformable polymer seal. The results of this work are expected to enhance both the design and performance of high-pressure hydrogen quick couplers, especially for applications in next-generation hydrogen refueling stations, where durability, sealing efficiency and safety are critical. Full article

Plasma impedance monitoring in semiconductor manufacturing processes is performed using external sensors, such as voltage-current (VI) probes or directional couplers. Plasma chamber impedance measurements, conducted in non-50 Ω matched transmission lines, suffer from a lack of clean signals due to phase variations and the nonlinearity of plasma, thus, sensor calibration is required for each installment. In this study, we monitored plasma impedance in situ based on the position of the vacuum variable capacitor within the matching network, without employing an external VI probe. We observed changes in the matching position according to parameter variations and subsequently confirmed that the calculated plasma impedance also varied accordingly. This study demonstrates the feasibility of real-time plasma impedance monitoring under 50 Ω-matched conditions without the use of external sensors, thereby simplifying plasma diagnostics. Full article

High-performance optical isolators are key components in photonic integrated circuits, with significant applications in nonlinear optical systems. We propose a design for a TE-mode optical isolator based on the AlGaAs-on-insulator platform. The isolator consists of non-reciprocal phase shift (NRPS) waveguides, reciprocal phase shift (RPS) waveguides, and multi-mode interference (MMI) couplers achieving low loss, high isolation, and wide bandwidth. Numerical simulations show that, at a wavelength of 1550 nm, the device provides a bandwidth of 91 nm at 30 dB isolation. The confinement factors for a magneto-optical (MO) waveguide were analyzed, and a detailed loss analysis revealed a total loss of 1.47 dB and a figure of merit (FoM) of 2.76 rad/dB. The manufacturing tolerances of the isolator are discussed referring to the requirement of stability and reliability in practical applications. This study provides an optimized design for high-performance TE-mode optical isolators in integrated photonic systems, which are well-suited for efficient and stable nonlinear optical applications. Full article

This study focuses on optical twin-core couplers, which facilitate light transmission between two closely aligned optical fibers. These couplers operate based on the principle of coupling, allowing signals in one core to interact with those in the other. The Kerr effect, which describes how a material’s refractive index changes in response to the intensity of light, induces the nonlinear behavior essential for generating solitons—self-sustaining wave packets that preserve their shape and speed. In our research, we employ fractional derivatives to investigate how fractional-order variations influence wave propagation and soliton dynamics. By utilizing the modified extended mapping method (MEMM), we derive solitary wave solutions for the equations governing the behavior of optical twin-core couplers under Kerr nonlinearity. This methodology produces novel fractional traveling wave solutions, including dark, bright, singular, and combined bright–dark solitons, as well as hyperbolic, Jacobi elliptic function (JEF), periodic, and singular periodic solutions. To enhance understanding, we present physical interpretations through contour plots and include both 2D and 3D graphical representations of the results. Full article

Silicon nitride (SiN) is emerging as a material of choice for photonic integrated circuits (PICs) due to its ultralow optical losses, absence of two-photon absorption in telecommunication bands, strong Kerr nonlinearity and high-power handling capability. These properties make SiN particularly well-suited for applications such as delay lines, chip-scale frequency combs and narrow-linewidth lasers, especially when implemented with thick SiN waveguides, which is achieved through low-pressure chemical vapor deposition (LPCVD). However, a significant challenge arises when the LPCVD SiN film thickness exceeds 300 nm on an 8-inch wafer, as this can result in cracking due to high stress. In this work, we successfully develop a damascene process to fabricate 800 nm-thick SiN photonics devices on an 8-inch wafer in a pilot line, overcoming cracking challenges. The resulting 2 × 2 multimode interference (MMI) coupler exhibits low excess loss (−0.1 dB) and imbalance (0.06 dB) at the wavelength of 1310 nm. Furthermore, the dispersion-engineered SiN micro-ring resonator exhibits a quality (Q) factor exceeding 1 × 10⁶, enabling the generation of optical frequency combs. Our demonstration of photonics devices utilizing the photonics damascene process sets the stage for high-volume manufacturing and widespread deployment. Full article

In this paper, we report a theoretical systematic study of continuous wave intracavity backwards optical parametric oscillators based on periodically poled lithium niobate (PPLN) for mid-infrared (mid-IR) light generation. We study the effects of varying different cavity parameters including nonlinear crystal length, cavity size, pump laser diode spot size, output coupler radius, and cavity loss values on the output power and threshold of the proposed mid-IR laser. The effects of different physical phenomena are included in the model including pump depletion due to the nonlinear conversion process, the thermal lens effect, and mode overlap between the beams in the nonlinear crystal. We show that high output powers in the mid infrared (>500 mW at 3.2 μm) can be achieved with proper cavity design and that a laser threshold with a PPLN as short as 2 cm can be reached. Full article

Optical vortex arrays are characterized by specific orbital angular momentums, and they have important applications in optical trapping and manipulation, optical communications, secure communications, and high-security information processing. Despite widespread research on optical vortex arrays, the 2 μm wavelength range remains underexplored. Pulsed lasers at 2 μm are vital in laser medicine, sensing, communications, and nonlinear optic applications. The need for 2 μm-pulsed structured optical vortices, combining the advantages of this wavelength range and optical vortex arrays, is evident. Therefore, using just three elements in the cavity, we demonstrate a compact self-Q-switched Tm:YALO₃ vortex laser by utilizing the self-modulation effect of a laser crystal and a defect spot mirror. By tuning the position of the defect spot and the output coupler, the resonator delivers optical vortex arrays with phase singularities ranging from 1 to 4. The narrowest pulse widths of the TEM₀₀ LG_0,−1, two-, three-, and four-vortex arrays are 543, 1266, 1281, 2379, and 1615 ns, respectively. All the vortex arrays in our study have relatively high-power outputs, slope efficiencies, and single-pulse energies. This work paves the way for a 2 μm-pulsed structured light source that has potential applications in optical trapping and manipulation, free-space optical communications, and laser medicine. Full article