Search Results (58)

Osteoarthritis (OA) is a degenerative joint disease characterized by progressive loss of articular cartilage and an associated decline in its intrinsic mechanoelectrical signaling. Current osteoarthritis treatments relieve symptoms but fail to prevent cartilage degeneration or restore its native biophysical microenvironment. Here, we present an ultrasound-activated, mussel-inspired bio-adhesive hydrogel that addresses these challenges by recreating the cartilage’s piezoelectric cues in situ while achieving stable intra-articular retention under synovial conditions. The hydrogel, denoted SFHD-BT@PDA, consists of a silk fibroin (SF) matrix integrated with dopamine-functionalized hyaluronic acid (HADA) and embedded barium titanate nanoparticles coated with polydopamine (BT@PDA). This multi-level design imparts strong interfacial adhesion to wet cartilage (via catechol-mediated bonding to collagen) and piezoelectric sensitivity to external ultrasound. Under ultrasound stimulation, SFHD-BT@PDA generates localized electrical microcurrents that recruit endogenous MSCs via electrotaxis and subsequently promote their chondrogenic differentiation. In vitro, ultrasound-triggered electrical cues upregulated chondrogenic markers (SOX9, collagen II, aggrecan) in MSCs and activated TGF-β signaling, demonstrating restoration of the pro-anabolic bioelectric microenvironment. In a murine DMM model, the adhesive hydrogel exhibited prolonged retention on cartilage surfaces and, with ultrasound, induced robust cartilage regeneration and OA reversal. Treated joints showed preserved proteoglycan and Type II collagen content, inhibited osteophyte formation, and protection of subchondral bone microarchitecture. In summary, this mussel-inspired piezoelectric hydrogel provides an electromechanical stimulation platform that effectively couples physical cues with bio-adhesion to regenerate cartilage. Full article

Long-term clinical translation of left ventricular assist devices (LVADs) is severely hampered by thromboembolism and device-related infection, both originating from inadequate biocompatibility of the device-blood interface. Current titanium surface modifications fail to simultaneously deliver durable antithrombotic and antibacterial performance, while conventional polydopamine-copper (PDA-Cu) coatings suffer from inherent limitations. Herein, we report a one-step rapid co-polymerization strategy based on mussel-inspired polyphenol chemistry to fabricate a copper-integrated polydopamine/tannic acid nanocoating on titanium (Ti/PDT(Cu)). By incorporating tannic acid rich in catechol/pyrogallol moieties, we achieve synergistic acceleration of dopamine oxidative polymerization with copper ions, dramatically shortening the fabrication time to 8 h (vs. 24 h for traditional PDA coatings). This process simultaneously constructs a robust dual-crosslinked network through covalent/hydrogen bonds and metal-phenolic coordination, exhibiting a uniform nanoscale-roughened structure. Comprehensive physicochemical characterizations confirm homogeneous coating deposition, excellent hydrophilicity, uniform Cu distribution, and superior long-term structural stability (95.68% thickness retention after 7 days of physiological immersion). The optimized coating displays broad-spectrum and durable antibacterial activity, with 92.79% and 89.73% reduction of E. coli and S. aureus at 24 h, respectively, and retains $>$89% antibacterial efficacy after 7 days of continuous elution (n = 3, * p$<$ 0.05). Moreover, the coating enables stable and sustained catalytic nitric oxide generation (43.85 $\pm$ 2.36 μM cumulative release over 14 days) that mimics endothelial function, resulting in 69.4% inhibition of platelet adhesion and an ultralow hemolysis ratio of 0.97% (n = 3). Critically, it maintains excellent cytocompatibility with L929 fibroblasts ($>$90% cell viability after 72 h co-culture). This work addresses key limitations of conventional PDA-based functional coatings, realizes synergistic antithrombotic and antibacterial dual functions showing great potential for blood-contacting cardiovascular device applications, and provides a facile and robust surface engineering platform for long-term implantable cardiovascular devices. Full article

Polyester/cotton blended fabrics—valued for comfort and durability—face significant fire hazards due to a synergistic “scaffold effect” during combustion. Conventional treatments with high temperature or some acidic phosphorus flame retardants during preparation often compromise the mechanical strength. Inspired by mussel adhesion chemistry, a mechanically enhanced polyester/cotton fabric was developed by using a novel bio-inspired phosphorus/nitrogen (P/N) synergistic coating. A uniform polydopamine-polyethylenimine (PDA-PEI) layer is rapidly deposited via co-deposition, suppressing dopamine self-polymerization. Subsequent covalent bonding with 2,2-dimethyl-1,3-propanediyl bis (phosphoryl chloride) (DPPC) establishes a robust P/N network. The fabricated PDA-PEI/DPPC coating reduces peak heat release rate (pHRR) and total heat release (THR) by 57.7% and 32.6%, respectively, in cone calorimetry, achieving self-extinguishment and a high limiting oxygen index (LOI) of 24.6%. Remarkably, the coating simultaneously increases the weft-direction breaking strength by 55% and elongation at break by 27.2%; these changes overcome the typical mechanical degradation associated with acidic phosphorus flame retardants. A comprehensive analysis reveals a synergistic mechanism: phosphoric acids catalyze cellulose dehydration and char layer formation in the condensed phase (90% stable C–C bonds), while radical scavengers (PO·, HPO·, and PDA) and non-flammable gases suppressed gas-phase combustion. This work presents a facile and effective strategy for fabricating high-performance and mechanically robust flame retardant polyester/cotton textiles, demonstrating the significant potential for improving fire safety in practical applications. Full article

Global growth in antimicrobial resistance (AMR) has accelerated the need for novel therapy beyond the scope of conventional antibiotics. In the last decade, polydopamine (PDA), a mussel-inspired polymer with redox capability, remarkable adhesion, and biocompatibility, has emerged as a universal antimicrobial coating with widespread uses. At the same time, extracellular vesicles (EVs) and particularly exosomes have gained prominence for their intrinsic cargo delivery and immune-modulating properties. Here, we summarize the synergistic value of PDA and exosome integration into multifunctional antimicrobial nanoplatforms. We discuss the inherent antimicrobial activity of PDA and exosomes; the advantages of PDA coating, including increased exosome stability, ROS generation, and surface functionalization; and current methodologies towards designing PDA-exosome hybrids. This review also mentions other antimicrobial polymers and nanocomposites that may be employed for exosome modification, such as quaternized chitosan, zwitterionic polymers, and polymer–metal composites. Most significant challenges, such as the maintenance of exosome integrity, coating uniformity, biocompatibility, scalability, and immunogenicity, are addressed. Finally, future research directions are highlighted, with emphasis on intelligent, stimulus-responsive coatings, AMP incorporation, and clinical translation. Collectively, this review underscores the promise of PDA-coated exosomes as potential antimicrobial therapeutics against AMR with potential applications in wound healing, implant protection, and targeted infection control. Full article

Polydopamine (PDA) is an emerging biomimetic material that stimulates the distinctive physicochemical properties of the blue mussel byssus. In this study, we report a rapid and facile method for the decoration of gold nanoparticles (AuNPs) onto the mussel-inspired polydopamine nanospheres (PDA NSs) via cold atmospheric plasma treatment. After 10 min of plasma treatment, AuNPs with a size of 10.3 ± 2.0 nm were formed on the surface of PDA NSs. This reaction was performed without the need for any additional reducing agents, thereby eliminating the use of harsh chemicals during the process. The synthesized AuNP-decorated PDA nanohybrids (PDA-Au) exhibit effective catalytic activity for the decoloration of Rhodamine B, with a pseudo-first-order rate constant of 1.405 min⁻¹. The green synthesis approach in this work highlights the potential of plasma-assisted methods for decorating biomimetic materials with metallic nanoparticles for catalytic and environmental applications. Full article

Guided bone regeneration (GBR) membrane has proven to be a fundamental tool in the realm of bone defect repair. In this study, we develop a mussel-inspired composite biomaterial through polydopamine-assisted, combining gelatin–WPU matrix with the ion-release behavior of Cu–MSNs for augmented bone regeneration. The optimized composite membrane exhibits enhanced mechanical stability, demonstrating a tensile strength of 11.23 MPa (representing a 2.3-fold increase compared to Bio-Gide^®), coupled with significantly slower degradation kinetics that retained 73.3% structural integrity after 35-day immersion in physiological solution. Copper ions act as angiogenic agents to promote blood vessel growth and as antimicrobial agents to prevent potential infections. The combined effect of these components creates a biomimetic environment that is ideal for cell adhesion, growth, and differentiation. This research significantly contributes to the development of advanced biomaterials that combine regeneration and infection-prevention functions. It provides a versatile and effective solution for treating bone injuries and defects, offering new hope for patients in need. Full article

Platanus officinalis fibers (PFs) taking advantage of high-availability, eco-friendly and low-cost characteristics have attracted significant focus in the field of biomaterial application. Polyethyleneimine grafted with polydopamine on magnetic Platanus officinalis fibers (PEI-PDA@M-PFs) were prepared through a two-step process of mussel inspiration and the Michael addition reaction, which can work as an effective multifunctional biomass adsorbent for anionic dye with outstanding separation capacity and efficiency. The as-prepared PEI-PDA@M-PFs possess desirable hydrophilicity, magnetism and positive charge, along with abundant amino functional groups on the surface, facilitating efficient adsorption and the removal of Eriochrome Black T (EBT) dyes from water. In addition to the formation mechanism, the adsorption properties, including adsorption isotherms, kinetics, and the reusability of the absorbent, were studied intensively. The as-prepared PEI-PDA@M-PFs achieved a theoretical maximum adsorption capacity of 166.11 mg/g under optimal conditions (pH 7.0), with 10 mg of the adsorbent introduced into the EBT solution. The pseudo-second-order kinetic and Langmuir models were well matched with experimental data. Moreover, thermodynamic data ΔH > 0 revealed homogeneous chemical adsorption with a heat-absorption reaction. The adsorbent remained at high stability and recyclability even after five cycles of EBT adsorption processes. These above findings provide new insights into the adsorption processes and the development of biologic material for sustainable applications. Full article

Polydopamine, a mussel-inspired self-adherent polymer of dopamine, has impressive adhesive properties and thus is one of the most versatile approaches to functionalize tissue engineering scaffolds. To date, many types of polydopamine-functionalized scaffolds have been manufactured and extensively applied in bone tissue engineering at the preclinical stage. However, how polydopamine is biodegraded and metabolized during the bone healing process and the side effects of its metabolite remain largely unknown. These issues are often neglected in the modern manufacture of polydopamine-functionalized materials and restrict them from stepping forward to clinical applications. In this study, using our bioinspired polydopamine-laced hydroxyapatite collagen calcium silicate material as a representative of polydopamine-functionalized tissue engineering scaffolds, we discovered that polydopamine can be metabolized to dopamine specifically by osteoclasts, which we termed “osteoclast-driven polydopamine-to-dopamine release”. The released dopamine showed an osteoinductive effect in vitro and promoted bone regeneration in calvarial critical-sized defects. The concept of “osteoclast-driven polydopamine-to-dopamine release” has considerable application potential. It could be easily adopted by other existing polydopamine-functionalized scaffolds: just by recruiting osteoclasts. Once adopted, scaffolds will obtain a dopamine-releasing function, which enables their modulation of osteoblast activity and hence elevates the osteoinductive effect. Thus, “osteoclast-driven polydopamine-to-dopamine release” serves as an upgrade patch, which is useful for many existing polydopamine-functionalized materials. Full article

In recent years, ceramic membranes have received widespread focus in the area of liquid separation because of their high permeability, strong hydrophilicity, and good chemical stability. However, in practical applications, the surface of ceramic membranes is prone to be contaminated, which degrades the permeation flux of ceramic membranes during the separation process. Inspired by mussels, we imitate the biomimetic mineralization process to prepare a ceramic membrane of nano–silica on the pre-modified zirconia surface by co-deposited polydopamine/polyethyleneimine. The modified ceramic membranes were utilized for the purpose of oil–water separation. Separation performance has been tested using a disc ceramic membrane dynamic filtration device. The outcomes revealed an enhanced permeability in the modified membrane, measuring as 159 L m⁻² h⁻¹ bar⁻¹, surpassing the separation flux of the unmodified membrane, which was 104 L m⁻² h⁻¹ bar⁻¹. The permeation performance of the modified membrane was increased to 1.5 times. Modified ceramic membranes are highly resistant to fouling. From the beginning to the end of separation process, the oil rejection rate of the modified ceramic membrane is always higher than 99%. After a 2 h oil–water separation test run, modified ceramic membrane permeate flux can be restored to 91% after cleaning. It has an enormous capacity for application in the area of oil–water separation. Full article

Background: Gelatin–xanthan gum (Gel–Xnt) hydrogel has been previously modified to improve its printability; now, to increase its ability for use as cell-laden 3D scaffolds (bioink), polydopamine (PDA), a biocompatible, antibacterial, adhesive, and antioxidant mussel-inspired biopolymer, has been added (1–3% v/v) to hydrogel. Methods: Control (CT) and PDA-blended hydrogels were used to print 1 cm² grids. The hydrogels’ printability, moisture, swelling, hydrolysis, and porosity were tested after glutaraldehyde (GTA) crosslinking, while biocompatibility was tested using primary human-derived skin fibroblasts and spontaneously immortalized human keratinocytes (HaCaT). Keratinocyte or fibroblast suspension (100 µL, 2.5 × 10⁵ cells) was combined with an uncrosslinked CT and PDA blended hydrogel to fabricate cylinders (0.5 cm high, 1 cm wide). These cylinders were then cross-linked and incubated for 1, 3, 7, 14, and 21 days. The presence of cells within various hydrogels was assessed using optical microscopy. Results and discussion: PDA blending did not modify the hydrogel printability or physiochemical characteristics, suggesting that PDA did not interfere with GTA crosslinking. On the other hand, PDA presence strongly accelerated and increased both fibroblast and keratinocyte growth inside. This effect seemed to be linked to the adhesive abilities of PDA, which improve cell adhesion and, in turn, proliferation. Conclusions: The simple PDA blending method described could help in obtaining a new bioink for the development of innovative 3D-printed wound dressings. Full article

Intrauterine adhesions (IUA) has become one of the main causes of female infertility. How to effectively prevent postoperative re-adhesion has become a clinical challenge. In this study, a mussel-inspired dual-network hydrogel was proposed for the postoperative anti-adhesion of IUA. First, a calcium alginate/polyacrylamide (CA-PAM) hydrogel was prepared via covalent and Ca²⁺ cross-linking. Benefiting from abundant phenolic hydroxyl groups, polydopamine (PDA) was introduced to further enhance the adhesion ability and biocompatibility. This CA-PAM hydrogel immersed in 10 mg/mL dopamine solution possessed remarkable mechanical strength (elastic modulus > 5 kPa) and super stretchability (with a breaking elongation of 720%). At the same time, it showed excellent adhesion (more than 6 kPa). Surprisingly, the coagulation index of the hydrogel was 27.27 ± 4.91, demonstrating attractive coagulation performance in vitro and the potential for rapid hemostasis after surgery. Full article

With the increasing demand for recycling composite materials and re-use of fibers and matrices as new resources in the context of a circular economy, composite materials often pose problems as they form complex aggregates. The user properties of high strength and long lifetime require strong interfaces between a matrix and reinforcing fibers, while recycling would benefit from easy separation of the two phases. Therefore, the design of an interface with reversible bonding upon thermal or chemical activation may offer a good balance. In addition, the request for bio-based composites incorporating cellulose fibers should be combined with bio-inspired interface modification avoiding traditional chemical surface modification. An impressive example of reversible bonding in nature is observed in mussels and is regulated by the so-called mussel foot proteins. The latter includes dopamine as a main component that presents reversible bonding upon a change in pH. In the present work, cellulose fibers were modified with a dopamine (DA) or polydopamine (PDA) coating that was polymerized when in contact with the cellulose surface, thus providing good chemical compatibility and interaction with cellulose hydroxyl groups. The adhesive properties of the modified cellulose fibers were investigated via local adhesive measurements using atomic force microscopy and varied between strong adhesion (low pH) and weak adhesion (high pH). In parallel, the macroscale mechanical strength of the epoxy composites with modified fibers improved, while the interface adhesion of the modified fibers dropped after submersion in solutions with pH = 9.8. Based on these observations, a proof of concept for recycling of cellulose/epoxy composites and recovery of cellulose fibers is demonstrated after grinding and chemical treatment at a high pH. Full article

To fabricate multilayer ceramic capacitors (MLCCs) that can withstand external impacts, technologies to achieve excellent adhesion and mechanical strength of the cover layer should be essentially developed. Low adhesion and strength of the cover layer can lead to delamination and cracks in the MLCC, respectively. In this study, we present a method for applying polydopamine (PDA), a mussel-inspired adhesive protein, for as robust cover layer on an MLCC. Barium titanate (BT) particles treated with PDA increase the dispersion stability of the BT/PDA slurry, preventing re-agglomeration of the particles and enhancing the adhesiveness and strength owing to the cohesive properties of PDA. Compared to the BT layer, the adhesion of the BT/PDA layer was significantly enhanced by 217%; consequently, the compression modulus of the BT/PDA cover layer increased by 29.4%. After firing, the N-doped graphitic PDA played an important role in producing an MLCC cover layer with increased hardness and toughness. Furthermore, the N-doped graphitic PDA with a hydrophobic surface forms tortuous moisture paths in the cover layer, preventing the degradation of insulation resistance of the MLCC. Full article

Bacterial infection has traditionally been treated with antibiotics, but their overuse is leading to the development of antibiotic resistance. This may be mitigated by alternative approaches to prevent or treat bacterial infections without utilization of antibiotics. Among the alternatives is the use of photo-responsive antimicrobial nanoparticles and/or nanocomposites, which present unique properties activated by light. In this study, we explored the combined use of titanium oxide and polydopamine to create nanoparticles with photocatalytic and photothermal antibacterial properties triggered by visible or near-infrared light. Furthermore, as a proof-of-concept, these photo-responsive nanoparticles were combined with mussel-inspired catechol-modified hyaluronic acid hydrogels to form novel light-driven antibacterial nanocomposites. The materials were challenged with models of Gram-negative and Gram-positive bacteria. For visible light, the average percentage killed (PK) was 94.6 for E. coli and 92.3 for S. aureus. For near-infrared light, PK for E. coli reported 52.8 and 99.2 for S. aureus. These results confirm the exciting potential of these nanocomposites to prevent the development of antibiotic resistance and also to open the door for further studies to optimize their composition in order to increase their bactericidal efficacy for biomedical applications. Full article

Hemorrhagic shock is the primary cause of death in patients with severe trauma, and the development of rapid and efficient hemostatic methods is of great significance in saving the lives of trauma patients. In this study, a polycaprolactone (PCL) nanofiber membrane was prepared by electrospinning. A PCL–PDA loading system was developed by modifying the surface of polydopamine (PDA), using inspiration from mussel adhesion protein, and the efficient and stable loading of thrombin (TB) was realized to ensure the bioactivity of TB. The new thrombin loading system overcomes the disadvantages of harsh storage conditions, poor strength, and ease of falling off, and it can use thrombin to start a rapid coagulation cascade reaction, which has the characteristics of fast hemostasis, good biocompatibility, high safety, and a wide range of hemostasis. The physicochemical properties and biocompatibility of the PCL–PDA–TB membrane were verified by scanning electron microscopy, the cell proliferation test, the cell adhesion test, and the extract cytotoxicity test. Red blood cell adhesion, platelet adhesion, dynamic coagulation time, and animal models all verified the coagulation effect of the PCL–PDA–TB membrane. Therefore, the PCL–PDA–TB membrane has great potential in wound hemostasis applications, and should be widely used in various traumatic hemostatic scenarios. Full article