Search Results (444)

The cosmetics industry has been seeking to develop products with renewable natural ingredients to reduce the use of or even replace synthetic substances. Biosurfactants can help meet this demand. These natural compounds are renewable, biodegradable, and non-toxic or have low toxicity, offering minimal risk to humans and the environment, which has attracted the interest of an emerging consumer market and, consequently, the cosmetics industry. The aim of the present study was to produce a biosurfactant from the yeast Starmerella bombicola ATCC 22214 cultivated in a mineral medium containing 10% soybean oil and 5% glucose. The biosurfactant reduced the surface tension of water from 72.0 ± 0.1 mN/m to 33.0 ± 0.3 mN/m after eight days of fermentation. The yield was 53.35 ± 0.39 g/L and the critical micelle concentration was 1000 mg/L. The biosurfactant proved to be a good emulsifier of oils used in cosmetic formulations, with emulsification indices ranging from 45.90 ± 1.69% to 68.50 ± 1.10%. The hydrophilic–lipophilic balance index demonstrated the wetting capacity of the biosurfactant and its tendency to form oil-in-water (O/W) emulsions, with 50.0 ± 0.20% foaming capacity. The biosurfactant did not exhibit cytotoxicity in the MTT assay or irritant potential. Additionally, an antioxidant activity of 58.25 ± 0.32% was observed at a concentration of 40 mg/mL. The compound also exhibited antimicrobial activity against various pathogenic microorganisms. The characterisation of the biosurfactant using magnetic nuclear resonance and Fourier transform infrared spectroscopy revealed that the biomolecule is a glycolipid with an anionic nature. The results demonstrate that biosurfactant produced in this work has potential as an active biotechnological ingredient for innovative, eco-friendly cosmetic formulations. Full article

The integration of nanotechnology and green synthesis strategies provides innovative solutions in biomedicine. This study focuses on the biofabrication of silver nanoparticles (AgNPs) using Corynespora smithii, an endophytic fungus isolated from Bergenia ciliata. The eco-friendly synthesis process employed fungal extracts as reducing and stabilizing agents thereby minimizing the need for hazardous chemicals. The AgNPs demonstrated strong potent biological activities, showcasing significant antioxidant, antibacterial, and anticancer properties. The antibacterial efficacy was demonstrated against various Gram-positive and Gram-negative bacteria, while cytotoxicity on the A549 lung cancer cell line revealed an IC₅₀ value of 10.46 µg/mL. A molecular docking analysis revealed interactions between the major bioactive compound, dimethylsulfoxonium formylmethylide, and the pathogenic proteins, Staphylococcus aureus and Salmonella typhi, displaying moderate binding affinities. Furthermore, the ADME analysis of dimethylsulfoxonium formylmethylide indicated favourable pharmacokinetic properties, including high gastrointestinal absorption, minimal lipophilicity, and low potential for drug–drug interactions, making it a promising candidate for oral drug formulations. These findings further support the compound’s suitability for biomedical applications. This research emphasizes the potential of C. smithii as a sustainable source for synthesizing bioactive nanoparticles, paving the way for their application in developing novel therapeutic agents. This study highlights the significance of harnessing endophytic fungi from medicinal plants for sustainable nanotechnology advancements. Full article

The increasing demand for sustainable and safer alternatives in the cosmetic industry has driven the search for multifunctional natural ingredients. Essential oils (EOs), known for their antimicrobial and antioxidant activities, are promising candidates with which to replace synthetic preservatives and antioxidants. This study aimed to evaluate the preservative and antioxidant potential of Lippia origanoides Kunth essential oil, in pure and encapsulated in β-cyclodextrin form, for cosmetic applications. The EO exhibited strong antioxidant activity, with low IC₅₀ values in DPPH and ABTS assays, and demonstrated antimicrobial efficacy, particularly against Escherichia coli and Staphylococcus aureus. Six cosmetic cream formulations were developed and tested for physicochemical and microbiological stability. Formulations with pure EO maintained high antioxidant performance and remained free of bacterial and fungal contamination over time, outperforming the commercial preservatives. In contrast, formulations with encapsulated EO exhibited delayed antioxidant and antimicrobial activity, indicating gradual release. Overall, Lippia origanoides EO proved to be an effective natural alternative to synthetic preservatives and antioxidants. This approach aligns with the current trend of eco-friendly formulations, offering a sustainable solution by incorporating plant-derived bioactives into cosmetic products. Full article

Wax deposition, driven by the crystallization of long-chain n-alkanes, poses severe challenges across industries such as petroleum, oil and natural gas, food processing, and chemical manufacturing. This phenomenon compromises flow efficiency, increases energy demands, and necessitates costly maintenance interventions. Wax inhibitors, designed to mitigate these issues, operate by altering wax crystallization, aggregation, and adhesion over the pipelines. Classic wax inhibitors, comprising synthetic polymers and natural compounds, have been widely utilized due to their established efficiency and scalability. However, synthetic inhibitors face environmental concerns, while natural inhibitors exhibit reduced performance under extreme conditions. The advent of nano-based wax inhibitors has revolutionized wax management strategies. These advanced materials, including nanoparticles, nanoemulsions, and nanocomposites, leverage their high surface area and tunable interfacial properties to enhance efficiency, particularly in harsh environments. While offering superior performance, nano-based inhibitors are constrained by high production costs, scalability challenges, and potential environmental risks. In parallel, the development of “green” wax inhibitors derived from renewable resources such as vegetable oils addresses sustainability demands. These eco-friendly formulations introduce functionalities that reinforce inhibitory interactions with wax crystals, enabling effective deposition control while reducing reliance on synthetic components. This review provides a comprehensive analysis of the mechanisms, applications, and comparative performance of classic and nano-based wax inhibitors. It highlights the growing integration of sustainable and hybrid approaches that combine the reliability of classic inhibitors with the advanced capabilities of nano-based systems. Future directions emphasize the need for cost-effective, eco-friendly solutions through innovations in material science, computational modeling, and biotechnology. Full article

The textile industry is progressively shifting towards more sustainable solutions, particularly in the field of printing technologies. This study reports the development and evaluation of water-based pigment inks formulated with bio-based pigments derived from intermediates produced via bacterial fermentation. Two pigments—indigo (blue) and quinacridone (red)—were incorporated into ink formulations and applied on cotton and polyester fabrics through valve-jet inkjet printing (ChromoJet). The physical properties of the inks were analyzed to ensure compatibility with the equipment, and printed fabrics were assessed as to their color fastness to washing, rubbing, artificial weathering, and artificial light. The results highlight the good performance of the bio-based inks, with excellent light and weathering fastness and satisfactory wash and rub resistance. The effect of different pre-treatments, including a biopolymer and a synthetic binder, was also investigated. Notably, the biopolymer pre-treatment enhanced pigment fixation on cotton, while the synthetic binder improved wash fastness on polyester. These findings support the integration of biotechnologically sourced pigments into eco-friendly textile digital printing workflows. Full article

Enteroviruses of the Picornaviridae family are transmitted primarily by the fecal–oral route. Transmission may occur following hand contact with contaminated fomites and subsequent ingestion of virus conveyed to the mouth by the contaminated hand. The persistence of these viruses on fomites likely plays a role in this transmission scenario. Six echoviruses (1, 2, 3, 5, 6, and 7) that cause frequently reported clinical cases in the United States were studied, along with poliovirus type 1 vaccine strain LSc-2ab. The infectivity half-lives of the enteroviruses deposited on vinyl tile coupons in a 10% fecal solution ranged from 1.7 to 12.6 h. The echovirus serotypes most commonly associated with reported infections persisted longer on the vinyl tiles than the less commonly reported types. This increased persistence on surfaces may favor the transmission of these echoviruses through the fecal–oral route. These results inform the future selection of appropriate model enteroviruses for challenging newly formulated and eco-friendly disinfectants or other strategies in infection prevention and control for enteroviruses. Full article

Background: Early caries management is essential to enable reversal of white spot lesions without the further need for operative interventions, especially in primary dentition. Silver-based compounds can be quite effective in arresting caries lesions; however, a major drawback is teeth staining. This study aimed to evaluate the remineralization potential and aesthetic effects of novel, green-synthesized nano-silver fluoride (NSF) on artificial white spot lesions in primary teeth in comparison to 38% silver diamine fluoride (SDF) and silver diamine fluoride/potassium iodide (SDF/KI). Materials and Methods: NSF was synthesized using green tea extract. Sixty primary teeth specimens with artificial enamel lesions were randomly divided into five groups depending on the applied material: 38% SDF, 38% SDF/KI, single and double application of NSF, and control group. Treatments were followed by pH cycling. Surface microhardness and photographic analysis were conducted to assess remineralization and staining. Statistical analysis was conducted using non-parametric tests including Kruskal–Wallis and Mann–Whitney U tests with Bonferroni correction. Results: The greatest increase in microhardness was observed in the group receiving double NSF application. Its remineralizing potential was comparable to that of 38% SDF/KI, with no statistically significant difference (p = 1.000). Importantly, NSF-treated samples exhibited no teeth discoloration, unlike the black staining observed in SDF and SDF/KI groups. Conclusions: Green-synthesized NSF is a promising alternative to conventional SDF and SDF/KI, offering remineralization benefits without compromising aesthetics. The eco-friendly formulation and non-staining properties support its potential for clinical use in pediatric dentistry. Full article

In this work, we report a green synthesis of zinc oxide (ZnO) nanoparticles using aqueous and ethanolic extracts of Tradescantia spathacea (purple maguey) as bioreducing and stabilizing agents, which are plant extracts not previously employed for metal oxide nanoparticle synthesis. This method provides an efficient, eco-friendly, and reproducible route to obtain ZnO nanoparticles, while minimizing environmental impact compared to conventional chemical approaches. The extracts were prepared following a standardized protocol, and their phytochemical profiles, including total phenolics, flavonoids, and antioxidant capacity, were quantified via UV-Vis spectroscopy to confirm their reducing potential. ZnO nanoparticles were synthesized using zinc acetate dihydrate as a precursor, with variations in pH and precursor concentration in both aqueous and ethanolic media. UV-Vis spectroscopy confirmed nanoparticle formation, while X-ray diffraction (XRD) revealed a hexagonal wurtzite structure with preferential (101) orientation and lattice parameters a = b = 3.244 Å, c = 5.197 Å. Scanning electron microscopy (SEM) showed agglomerated morphologies, and Fourier transform infrared spectroscopy (FTIR) confirmed the presence of phytochemicals such as quercetin, kaempferol, saponins, and terpenes, along with Zn–O bonding, indicating surface functionalization. Zeta potential measurements showed improved dispersion under alkaline conditions, particularly with ethanolic extracts. This study presents a sustainable synthesis strategy with tunable parameters, highlighting the critical influence of precursor concentration and solvent environment on ZnO nanoparticle formation. Notably, aqueous extracts promote ZnO synthesis at low precursor concentrations, while alkaline conditions are essential when using ethanolic extracts. Compared to other green synthesis methods, this strategy offers control and reproducibility and employs a non-toxic, underexplored plant source rich in phytochemicals, potentially enhancing the crystallinity, surface functionality, and application potential of the resulting ZnO nanoparticles. These materials show promise for applications in photocatalysis, in antimicrobial coatings, in UV-blocking formulations, and as functional additives in optoelectronic and environmental remediation technologies. Full article

Eco-friendly mortars have been manufactured with hybrid binders made of blast furnace slag and a reduced amount of clinker. The objective is to explore new formulations suitable for reinforced structures. Previous studies are mainly focused on activation with sulfates, a salt that is corrosive to reinforcing steel. Sodium nitrate and sodium carbonate, easily implementable in construction, have been used as activators in two different concentrations that involve similar Na content. A Type II PC mortar is used as reference. The dimensional stability of the mortars during curing (at 99% RH) and subsequent drying at 40% RH, has been evaluated, as well as their porosity and mechanical properties. Böhme tests revealed that studied hybrid binders have lower wear resistance than PC mortar. Activation with Na₂CO₃ allows the obtention of mortars with reduced porosity and good compression resistance, but generates microcracking that favors chloride diffusion. Activation with nitrates favors precipitation of AFm phases identified through differential thermal analysis. Nitrates in moderate amounts (4% w/w) allow manufacturing hybrid mortars with good resistance to chloride penetration and reasonably good mechanical properties. Hence, this binder can be a promising option for reinforced structures. Higher amounts of nitrates (8%) for activation give rise to more porous mortars. Full article

Antifouling coatings are integral to the maritime economy. The efficacy of the applied painting system is closely correlated with susceptibility to fouling and the adhesion strength of contaminants. A fouled hull might result in an elevated fuel consumption and journey expenses. Biofouling on ship hulls also has detrimental environmental consequences due to the release of biocides during maritime travel. Therefore, it is imperative to develop eco-friendly antifouling paints that inhibit the robust adhesion of marine organisms. This study aimed to assess a biocide-free antifouling coating formulated with polymers intended to diminish molecular adhesion interactions between marine species’ adhesives and the coating. The evaluation included laboratory corrosion experiments in artificial seawater and the immersion of samples in a marine environment in Attica, Greece, for varying durations. The research indicates that an antifouling coating applied to naval steel in an artificial seawater solution improves corrosion resistance by more than 60%. The conductive polymer covering, comprising polyaniline and graphene oxide, diminishes corrosion current values, lowers the corrosion rate, and enhances corrosion potentials. The impedance parameters exhibit analogous behavior, with the coating preventing water absorption and displaying corrosion resistance. The coating serves as a low-permeability barrier, exhibiting exceptional durability for naval steel over time, with an operational performance up to 98%. Full article

The nursery phase is vital for forest regeneration, yet studies on plant growth-promoting (PGP) bacteria to enhance sustainable nursery production in forest species are scarce. This study explores whether endophytic bacteria from disease-resistant Pinus pinea L. can improve germination and seedling quality in susceptible Pinus radiata D. Don. Root endophytes were isolated, screened for PGP traits, and identified via 16S rRNA gene sequencing. Bacterial formulations were applied to P. radiata seeds to determine their impact on germination and plant quality indicators (photosynthetic pigments and other metabolites). Paenibacillaceae (19%) and Bacillaceae (13%) were predominant among 68 isolates, with 94% producing indole-3-acetic acid, and Burkholderiaceae showing the broadest PGP trait diversity. Seedlings inoculated with formulation C3 (Caballeronia R.M3R3, Rhodococcus T.M4R4, and Mesorhizobium R.M1R2) displayed an improved germination rate (89% compared to 71% from the uninoculated control), while those inoculated with formulation P4 (Paenibacillus T.M5R4, Bacillus R.M2R7, Acinetobacter T.M2R22, and Paraburkholderia R.M1R3) showed an improved germination rate (81%), increased amount of starch (0.4-fold), and free amino acids (1.5-fold). This study presents a comprehensive approach, from endophyte isolation to in vivo tests, highlighting two bacterial formulations as candidates for further proof-of-concept nursery trials. Ultimately, these bioinoculants represent eco-friendly strategies to enhance forest seedling establishment and support sustainable forest management. Full article

Plant growth-promoting rhizobacteria (PGPR) are eco-friendly and sustainable options for agrochemicals, particularly for enhancing crop productivity under stress conditions. The present research aims to isolate and characterize native PGPR from tomato rhizospheric soil and to evaluate their effectiveness as a dose-dependent response to enhance the growth of tomato seedlings. Out of 112 isolates, 10 bacterial strains were selected based on key PGPR traits, including indole-3-acetic acid (IAA), ammonia production, hydrogen cyanide (HCN), exopolysaccharide (EPS) synthesis, hydrolytic enzyme activity, potassium solubilization, antifungal activity against Fusarium oxysporum, and tolerance to pH and heat stress. Molecular identification via 16S rRNA gene sequencing confirmed that these isolates belong to the genera Serratia and Enterobacter. S. marcescens So-1 and Enterobacter sp. So-12 produced the highest levels of IAA (2.6–24.1 µg/mL). In vitro tomato seed germination tests using bacterial suspensions at three concentrations (10⁶, 10⁷, and 10⁸ CFU/mL) showed dose-dependent improvements, with T1 increasing germination up to 108.3% compared to the control. In polyhouse trials using cocopeat formulations, seedling growth improved noticeably. T2 increased the root length (28.3 ± 2.98 cm) by over 1560%, and the shoot length (35.7 ± 0.57 cm) increased by 55% against the control, whose root length is 1.7 ± 0.47. The chlorophyll amount of the treated leaves further showed significant results over the control. Collectively, these findings suggest that using native PGPR in a dose-dependent way can help tomato seedlings grow better and promote more sustainable crop production. Full article

Ultra-high-performance concrete (UHPC) reinforced with recycled tire steel fibers (RTSFs) was studied to evaluate its mechanical properties and cracking behavior. Using acoustic emission (AE) monitoring, researchers tested various RTSF replacement rates in compression and flexural tests. Results revealed a clear trend: mechanical properties initially improved then declined with increasing RTSF content, peaking at 25% replacement. AE analysis showed distinct patterns in energy release and crack propagation. Signal timing for energy and ringing count followed a delayed-to-advanced sequence, while b-value and information entropy changes indicated optimal flexural performance at specific replacement rates. RA-AF classification demonstrated that shear failure reached its minimum (25% replacement), with shear cracks increasing at higher ratios. These findings demonstrate RTSFs’ dual benefits: enhancing UHPC performance while promoting sustainability. The 25% replacement ratio emerged as the optimal balance, improving strength while delaying crack formation. This study provides insights into the mechanism by which waste tire steel fibers enhance the performance of UHPC. This research provides valuable insights for developing eco-friendly UHPC formulations using recycled materials, offering both environmental and economic advantages for construction applications. Full article

Helianthus annuus L. (H. annuus) receptacles, a major agricultural by-product generated during seed processing, are currently underutilized. This study aimed to explore the valorization potential of this by-product by extracting H. annuus receptacles total polysaccharides (HRTP) and characterizing their potential as natural ingredients in ultraviolet (UV)-protective cosmetics. A new purified polysaccharide named H. annuus receptacles polysaccharide-1 (HRP-1) was isolated, likely exhibiting a backbone of alternating →4)-α-D-GalA-(1→ and →4)-α-D-GalA(6-OCH₃)-(1→ units, with a weight-average molecular weight (Mw) of 163 kDa. HRTP demonstrated significant protective effects against UV-induced damage in human immortalized keratinocyte (HaCaT) cells by suppressing intracellular reactive oxygen species (ROS) levels and downregulating MAPK-p38/ERK/JNK pathways, thereby inhibiting inflammatory cytokines (IL-1β, IL-6, IL-8, and TNF-α) and matrix metalloproteinases (MMP-1, MMP-3, and MMP-9). Additionally, HRTP exhibited moisturizing properties. These findings highlight H. annuus receptacle polysaccharides as sustainable, bioactive ingredients for eco-friendly sunscreen formulations, providing a practical approach to converting agricultural by-products into high-value industrial biomaterials. Full article

The widespread use of conventional plastic in food packaging has raised serious environmental issues due to its persistence and poor biodegradability. With growing concerns over plastic pollution and its long-term ecological impact, researchers are increasingly turning to natural, renewable sources for sustainable alternatives. Agricultural waste, often discarded in large quantities, offers a valuable resource for producing biodegradable polymers. This review discusses the environmental burden caused by traditional plastics and explores how agricultural residues such as rice husks, corn cobs, and fruit peels can be converted into eco-friendly packaging materials. Various types of biopolymers sourced from agricultural waste, including cellulose, starch, plant and animal-based proteins, polyhydroxyalkanoates (PHA), and polylactic acid (PLA), are examined for their properties, benefits, and limitations in food packaging applications. Each material presents unique characteristics in terms of biodegradability, mechanical strength, and barrier performance. While significant progress has been made, several challenges remain, including cost-effective production, material performance, and compliance with food safety regulations. Looking ahead, innovations in material processing, waste management integration, and biopolymer formulation could pave the way for widespread adoption. This review aims to provide a comprehensive overview of current developments and future directions in the use of agricultural waste for sustainable packaging solutions, comparing their biodegradability and performance to conventional plastics. Full article