Search Results (100)

This research prepared and characterised novel mixed coordination complexes derived from escitalopram with eugenol and curcumin to form (L₁) and (L₂), respectively. The complexes were prepared via Williamson ether synthesis and analysed by FTIR, UV–Vis, ¹H-NMR spectroscopy, elemental analysis, molar conductivity, and magnetic susceptibility. The results confirmed their octahedral geometries. Magnetic investigation reported high-spin configurations for Mn(II), Co(II), and Ni(II) complexes, whereas Cu(II) exhibited a distorted octahedral arrangement with characteristic d–d transitions. In addition, the calculation of Density functional theory (DFT) provided more insight into the detailed structural and electronic properties of the new ligand and its complexes. Antimicrobial compounds were evaluated against Escherichia coli, Staphylococcus aureus, and Candida albicans through the agar well diffusion method. The reported results revealed that Cobalt complexes showed antimicrobial activity followed by Copper (Cu), Nickel (Ni) and Manganese(Mn) complexes, respectively, due to an increase in Co-lipophilicity, which leads to improved diffusion through microbial cell membranes. The research findings confirmed that escitalopram-based mixed ligands coordinate with transition metals and could have significant biological applications. Full article

Ore mining and smelting are often related to environmental pollution. This study provides information about the geochemical features of Technosols at historical mining and metallurgical sites in the Tatra Mountains, southern Poland, evaluating the contents of potentially toxic trace elements (PTTE) and their behaviours in soils, as well as the influence of soil properties on PTTE mobility. Thirteen soil profiles were studied in eight abandoned mining and smelting sites. PTTE concentrations, including rare earth elements (REE), were measured using ICP-MS and ICP-OES. Selected elements (Cu, Zn, Pb, Cd, As, Sb, Ba, Sr, Co, Ni, Mn and Cr) were fractionated using the modified European Community Bureau of Reference (BCR) four-step sequential extraction. Contamination of soils with PTTE was compared against Polish regulatory limits, which were exceeded for Cu, Zn, Pb, Mo, Hg, As, Co, Ni and Ba, with concentrations exceeding limits by 16, 18, 34 and 160 times for Cu, Hg, As and Ba, respectively, in some profiles. Based on geochemical features depending on parent material properties, the soils examined were divided into three groups. Group I Technosols (near-neutral soils developed from Fe/Mn-ore and carbonate-bearing mining waste) were particularly enriched in Co, Ni, Mn and REE. Group II Technosols (acidic soils developed from polymetallic ore-bearing aluminosilicate mining waste) contained elevated concentrations of Cu, Zn, Hg, As, Sb, Bi, Co, Ag, Ba, Sr, U and Th; they contained lower contents of REE than Group I Technosols. Group III Technosols (soils developed in smelting-affected areas and containing metallurgical waste) were rich in Cu, As, Sb, Ba, Hg, Co and Ag and contained the lowest REE contents among the studied soils. Sequential BCR extraction revealed that PTTE mobility varied strongly according to soil group, with higher mobility of Mn, Cu and Zn in acidic polymetallic ore-derived soils (Group II), while carbonate-rich soils (Group I) showed mainly immobile forms. Metallurgical slag-derived soils (Group III) exhibited complex PTTE behaviour controlled by organic matter and Fe/Mn oxides. Soil properties (pH, carbonates and TOC) seem to control PTTE mobility. Full article

The selectivity of the colorimetric method for Co(II) determination using the nitroso-R-salt (NRS) in samples with complex matrices has been improved. Interferences caused by Cu(II), Fe(II), Fe(III), Mn(II), Al(III) and Ni(II) ions, which were present in the bioleach ate of lithium-ion batteries, have been solved through the sequential addition of masking agents: acetate, fluoride, ethylenediaminetetraacetic acid (EDTA), and strong acids (H₂SO₄). The absorbance of the NRS-Co(II) complex was typically measured at 525 nm, but it was also studied at 550 nm due to minimal interferences observed at 550 nm. The sequence of the masking agent’s addition showed a significant influence on the interference effect. The optimal sequence was sample, acetate–acetic acid buffer solution with dissolved fluoride, NRS, EDTA and H₂SO₄. The proposed method demonstrated robust performance at 550 nm, with a relative standard deviation (RSD) around 2%, and good accuracy (RV% around 100%). The limit of detection (LoD) was 0.1 mg L⁻¹ and the limit of quantification (LoQ) was 0.3 mg L⁻¹. The linear range extended up to 15 mg L⁻¹ (R² = 0.998). Real samples analyzed using the optimized method showed no significant differences when compared to results from atomic absorption spectroscopy, confirming its reliability. Full article

Aryl diazonium salt chemistry offers a robust and versatile approach for the modification of material surfaces via the covalent immobilization of reactive functional groups under mild conditions. In this study, this strategy was successfully applied to graft the chelating agent 4-(2-pyridylazo)resorcinol (PAR) onto Amberlite XAD-4 resin. Initially, 4-nitrobenzenediazonium tetrafluoroborate (NBDT) was covalently anchored onto the resin surface using hypophosphorous acid as a reducing catalyst to introduce aryl nitro groups. These nitro groups were subsequently reduced to aniline functionalities, enabling diazo coupling with PAR. The successful modification of the resin was confirmed by ATR-FTIR spectroscopy, thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The synthesized chelating resin exhibited sorption capacities of 0.152, 0.167, and 0.172 mM g⁻¹ for Co(II), Ni(II), and Cu(II), respectively. The functionalized resin was packed into standard SPE cartridges and employed as a selective sorbent for the extraction and preconcentration of trace metals from groundwater samples collected from Dhalamah Valley, Al-Madinah Al-Munawwarah, prior to quantification by inductively coupled plasma mass spectrometry (ICP-MS). These results demonstrate the effectiveness of rapid diazonium-based surface functionalization for the preparation of selective polymeric metal chelators suitable for the extraction of trace metals from complex groundwater matrices. Full article

Metal ions, including Mg(II), Ca(II), Sr(II), Co(II), Ni(II), Cu(II), Nd(III), Eu(III), and Tb(III), were investigated in binary systems alongside ampicillin at molar ratios of 1:1 and 1:2. These investigations were carried out in aqueous solutions, and the formation of complexes was verified through meticulous computational analysis. Detailed stability constants for the formed complexes and equilibrium constants for the involved reactions were meticulously determined. Furthermore, a comprehensive examination of the impact of ligand concentration on the configuration of the central metal atom’s coordination sphere was conducted. This investigation was complemented by spectroscopic measurements, which effectively confirmed the observed changes in the coordination sphere of the metal ions. Full article

Background: Transition metal complexes incorporating fluorinated counter anions represent a significant class of compounds with broad applications in industry, pharmaceuticals, and biomedicine. These fluorinated anions are known to enhance the solubility, stability, and reactivity of the complexes, thereby expanding their functional utility in various chemical and biological contexts. Methods: A set of metal(II) complexes of the general formula [MPy₆][B(C₆F₅)₄]₂ where (Py = pyridine, M = Mn (1), Fe (2), Co (3), Ni (4), Cu (5), Zn (6)) have been synthesized by direct reaction of metal halides and pyridine in the presence of Ag[B(C₆F₅)₄]. The complexes were characterized using different techniques to assure their purity, such as elemental analysis (EA), electron paramagnetic resonance (EPR) spectroscopy, thermogravimetric analysis (TGA), ultraviolet–visible (UV–Vis) spectroscopy, ¹¹B-NMR, ¹H-NMR, and FT-IR spectroscopy. The antimicrobial and antifungal properties against different types of bacteria and fungi were studied for all prepared complexes. Results: The synthesized complexes exhibited broad-spectrum antimicrobial activity, demonstrating variable efficacy compared to the reference antibiotic, oxytetracycline (positive control). Notably, complex 6 displayed exceptional antibacterial activity against Streptococcus pyogenes, with a minimum inhibitory concentration (MIC) of 4 µg/mL, outperforming the control (MIC = 8 µg/mL). Complexes 1, 2, and 4 showed promising activity against Shigella flexneri, Klebsiella pneumoniae, and Streptococcus pyogenes, each with MIC values of 8 µg/mL. Conversely, the lowest activity (MIC = 512 µg/mL) was observed for complexes 3, 5, and 6 against Pseudomonas aeruginosa, Escherichia coli, and Klebsiella pneumoniae, respectively. Regarding antifungal properties, complexes 5 and 6 demonstrated the highest activity against Candida albicans, with MIC values of 8 µg/mL, equivalent to that of the positive control, fluconazole. Density functional theory (DFT) calculations confirmed an overall octahedral coordination geometry for all complexes, with tetragonal distortions identified in complexes 3, 4, and 5. Full article

In this study, 3-chlorothiophene-2-carboxylic acid (HL) was used as a main ligand to successfully synthesize four novel complexes: [Cu(L)₂(Py)₂(OH₂)₂] (1), [Co(L)₂(Py)₂(OH₂)₂] (2) (Py = pyridine), [{Ni(L)₂(OH₂)₄}₂{Ni(L)(OH₂)₅}]L•5H₂O (3), and [{Co(L)₂(OH₂)₄}₂{Co(L)(OH₂)₅}]L•5H₂O (4). All four compounds were identified by elemental analysis and ESI mass spectrometry, and subsequently characterized by IR spectroscopy, UV-visible diffuse reflectance spectroscopy, electron paramagnetic resonance spectroscopy, thermogravimetric analysis, single-crystal X-ray crystallography, and cyclic voltammetry. X-ray analyses revealed that complexes 1 and 2 exhibit a centrosymmetric pseudo-octahedral coordination geometry; the copper (II) and cobalt (II) metal ions, respectively, are located at the crystallographic center of inversion. The coordination sphere of the copper (II) complex is axially elongated in accordance with the Jahn–Teller effect. Intriguingly, for charge neutrality, compounds 3 and 4 crystallized as three independent mononuclear octahedrally coordinated metal centers, which are two $\left[\mathrm{M}{\mathrm{L}}_2{\left({\mathrm{O}\mathrm{H}}_2\right)}_4\right]$ complex molecules and one ${\left[\mathrm{M}\mathrm{L}{\left({\mathrm{O}\mathrm{H}}_2\right)}_5\right]}^{+}$ complex cation (M = ${\mathrm{N}\mathrm{i}}^{\mathrm{I}\mathrm{I}}$ and ${\mathrm{C}\mathrm{o}}^{\mathrm{I}\mathrm{I}}$, respectively), with the ligand anion ${\mathrm{L}}^{-}$ serving as the counter ion. The anticancer activities of these complexes were systematically assessed on human leukemia K562 cells, lung cancer A549 cells, liver cancer HepG2 cells, breast cancer MDA-MB-231 cells, and colon cancer SW480 cells. Among them, complex 4 shows significant inhibitory effects on leukemia K562 cells and colon cancer SW480 cells. Full article

The rising demand for lithium-ion batteries (LIBs), driven by the growing consumption of electronic devices and the expansion of electric vehicles, is leading to a concerning depletion of primary metal resources and a significant accumulation of electronic waste. This urgent challenge highlights the need for sustainable recovery methods to extract valuable metals from spent LIBs, aligning with circular economy principles. In this study, the preparation of spent batteries for the bioleaching process was achieved with minimal manipulation. This included a preliminary discharge to ensure safety in subsequent processes and a brief crushing to facilitate the access of leaching agents to valuable metals. Unlike most studies that grind batteries to obtain powders between 70 and 200 microns, our approach works with particles sized around 5 mm. Additionally, our preparation process avoids any thermal or chemical treatments. This straightforward pre-treatment process marks a significant advancement by reducing the complexity and cost of processing. A systematic study was conducted on various fractions of the large particle sizes, using Fe (III) produced through bio-oxidation by A. ferrooxidans and biogenically obtained H2SO4 from A. thiooxidans. The highest metal extraction rates were achieved using the unsorted fraction, directly obtained from the black mass after the grinding process, without additional particle separation. When treated with bio-oxidized Fe (III), this fraction achieved a 95% recovery of Cu, Ni, and Al within 20 min, and over 90% recovery of Co, Mn, and Li within approximately 30 min. These recovery rates are attributed to the combined reducing power of Al and Cu already present in the black mass and the Fe (II) generated during the oxidation reactions of metallic Cu and Al. These elements actively facilitate the reduction of transition metal oxides into their more soluble, lower-valence states, enhancing the overall metal solubilization process. The extraction was carried out at room temperature in an acidic medium with a pH no lower than 1.5. These results demonstrate significant potential for efficient metal recovery from spent batteries with minimal pre-treatment, minimizing environmental impact. Additionally, the simplified residue preparation process can be easily integrated into existing waste management facilities without the need for additional equipment. Full article

In this study, we synthesized a novel trimethoprim derivative, 4-(((2-amino-5-(3,4,5-trimethoxybenzyl) pyrimidine-4-yl)imino)methyl)benzene-1,3-diol (HD), by the reaction of trimethoprim with 2,4-dihydroxybenzaldehyde. We then prepared metal complexes of this derivative with Cu(II), Co(II), Ni(II), Ag(I), and Zn(II) and functionalized them with ZnO and Au nanoparticles. Their structures were confirmed through ¹H NMR, mass spectrometry, FTIR, conductivity, thermal analysis, magnetic susceptibility, X-ray diffraction, UV-Vis spectroscopy, and TEM, revealing octahedral geometries for all complexes. Surface features were investigated using density functional theory (DFT) analysis. Pharmacokinetic parameters and target enzymes for HD and its complexes were computed using the SwissADME web tool, with the BOILED-Egg model indicating that HD and its Cu complex should be passively permeable via the blood-brain barrier and highly absorbed by the gastrointestinal tract (GIT), unlike the Ni, Co, Ag, and Zn complexes, which are predicted to show low GIT absorption. Molecular docking studies with the Caspase-3 enzyme (PDB code: 3GJQ) using the AutoDock 4.2 software demonstrated binding energies of −7.66, −8.36, −9.05, −8.62, −6.90, and −7.81 kcal/mol for HD and the Cu, Co, Ni, Ag, and Zn complexes, respectively, compared to −6.54 and −4.63 kcal/mol for TMP and 5-FU (5-fluorouracil), indicating a potential superior anticancer potential of the novel compounds. The anticancer activities of these complexes were evaluated using the MTT assay. The IC₅₀ values for 5-FU, TMP, HD, Cu-HD, HD@ZnONPs, Cu-HD@ZnONPs, HD@AuNPs, and Cu-HD@AuNPs were found to be 32.53, 80.76, 114.7, 61.66, 77, 53.13, 55.06, and 50.81 µg/mL, respectively. Notably, all derivatives exhibited higher activity against the HepG-2 cancer cell line than TMP, except for HD, which showed similar effectiveness to TMP. Real-time PCR analysis revealed that the Au-HD@AuNPs and Cu-HD@AuNPs significantly increased caspase-3 inhibition by 4.35- and 4.5-fold and P53 expression by 3.05- and 3.41-fold, respectively, indicating enhanced pro-apoptotic gene expression and apoptosis induction in HepG2 cells. Our findings demonstrate that these novel derivatives possess significant anticancer properties, with some complexes showing superior activity compared to standard drugs such as 5-Fluorouracil (5-FU) and Trimethoprim (TMP). This study highlights the potential of these nanocomposites as promising candidates for cancer therapy. Full article

Due to the lack of UV-protective properties for cotton textiles and the potential of cotton textiles to cause microbes to their users, we synthesized benzimidazole Schiff base derivative (BZI) namely N-((1H-benzo[d]imidazol-2-yl)methyl)-1-(4-fluorophenyl)methanimine and their V(III), Fe(III), Co(II), Ni(II), and Cu(II) complexes as UV protection and antimicrobial agents for cotton textile. Several techniques investigated these compounds: ¹H, ¹³C NMR, IR, UV–Vis, elemental analysis, DTA, and TGA. The Schiff base ligand behaved as a bidentate ligand. The prepared ligand and its complexes are used to treat the cotton fabrics (CFs) by immersing the fabric in the solution of the samples under ultrasonic. The treated cotton fabrics were investigated using IR and SEM-EDX analysis. The UPF values of the treated cotton fabric were obtained. The results showed that the cotton fabric treated with Fe(III) and Cu(II) complexes had excellent UV protection with UPF values of 50+. The disc diffusion method evaluated the treated cotton fabric’s antimicrobial activity. The antifungal activities of the treated CFs demonstrated that the Co(II)-BZI-CF was active on C. albicans with an inhibition zone of 12 mm, while the other samples were inactive on C. albicans and A. flavus. The V(III)-BZI-CF and Fe(III)-BZI-CF had no activity against S. aureus and E. coli bacteria while the other samples gave an inhibition zone of between 10 to 17 mm. Unlike previous studies that primarily focused on either UV protection or antimicrobial properties of metal complexes separately, this research integrates both functionalities by synthesizing benzimidazole Schiff base metal complexes and applying them to cotton textiles, demonstrating enhanced UV protection and selective antimicrobial activity. Full article

Vibrational circular dichroism (VCD) enhancement by low-lying electronic states (LLESs) is a fascinating phenomenon, but accounting for it theoretically remains a challenge despite significant research efforts over the past 20 years. In this article, we synthesized two transition metal complexes using the tetradentate Schiff base ligands (R,R)- and (S,S)-N,N′-Bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediamine with Co(II) and Mn(III), referred to as Co(II)-salen-chxn and Mn(III)-Cl-salen-chxn, respectively. Their stereochemical properties were explored through a combined experimental chiroptical spectroscopic and theoretical approach, with a focus on Co(II)-salen-chxn. Extensive conformational searches in CDCl₃ for both high- and low-spin states were carried out and the associated infrared (IR), VCD, ultraviolet-visible (UV-Vis) absorption, and electronic circular dichroism (ECD) spectra were simulated. A good agreement between experimental and simulated data was achieved for IR, VCD, UV-Vis, and ECD, except in the case of VCD of Co(II)-salen-chxn which exhibits significant intensity enhancement and monosignate VCD bands, attributed to the LLESs. Interestingly, detailed comparisons with Mn(III)-Cl-salen-chxn and previously reported Ni(II)-salen-chxn and Cu(II)-salen-chxn complexes suggest that the enhancement factor is predicted by the current density functional theory simulations. However, the monosignate signatures observed in the experimental Co(II) VCD spectrum were not captured theoretically. Based on the experiment and theoretical VCD and ECD comparison, it is tentatively suggested that Co(II)-salen-chxn exists in both low- and high-spin states, with the former being dominant, while Mn(III)-Cl-salen-chxn in the high-spin state. The study indicates that VCD enhancement by LLESs is at least partially captured by the existing theoretical simulation, while the symmetry consideration in vibronic coupling provides further insight into the mechanisms behind the VCD sign-flip. Full article

The oxime group is important in organic and inorganic chemistry. In most cases, this group is part of an organic molecule possessing one or more donor sites capable of forming bonds to metal ions. One family of such compounds is the group of 2-pyridyl (aldo)ketoximes. Metal complexes of 2-pyridyl oximes continue to attract the intense interest of many inorganic chemistry groups around the world for a variety of reasons, including their interesting structures, physical and biological properties, and applications. A unique member of 2-pyridyl ketoximes is di-2-pyridyl ketoxime (dpkoxH), which contains two 2-pyridyl groups and an oxime functionality that can be easily deprotonated giving the deprotonated ligand (dpkox⁻). The extra 2-pyridyl site confers a remarkable flexibility resulting in metal complexes with exciting structural and reactivity features. Our and other research groups have prepared and characterized many metal complexes of dpkoxH and dpkox⁻ over the past 30 years or so. This work is an attempt to build a “periodic table” of dpkoxH, which is near completion. The filled spaces of this “periodic table” contain metal ions whose dpkoxH/dpkox⁻ complexes have been structurally characterized. This work reviews comprehensively the to-date published coordination chemistry of dpkoxH with emphasis on the syntheses, reactivity, relationship to metallacrown chemistry, structures, and properties of the metal complexes; selected unpublished results from our group are also reported. The sixteen coordination modes adopted by dpkoxH and dpkox⁻ have provided access to monomeric and dimeric complexes, trinuclear, tetranuclear, pentanuclear, hexanuclear, heptanuclear, enneanuclear, and decanuclear clusters, as well as to a small number of 1D coordination polymers. With few exceptions ({M^IILn^III₂} and {Ni^II₂Mn^III₂}; M = Ni, Cu, Pd, and Ln = lanthanoid), most complexes are homometallic. The metals whose ions have yielded complexes with dpkoxH and dpkox⁻ are Cr, Mn, Fe, Co, Ni, Cu, Zn, Ru, Rh, Pd, Ag, Cd, Re, Os, Ir, Au, Hg, lanthanoids (mainly Pr and Nd), and U. Most metal complexes are homovalent, but some mixed-valence Mn, Fe, and Co compounds have been studied. Metal ion-assisted/promoted transformations of dpkoxH, i.e., reactivity patterns of the coordinated ligand, are also critically discussed. Some perspectives concerning the coordination chemistry of dpkoxH and research work for the future are outlined. Full article

Background: In the last few decades, the field of coordination chemistry has grown very fast, especially in the fields of pharmaceutical, biological and catalytic studies. In ancient times, metals were thought to be beneficial to health issues but nowadays the link between organic–metal substances and different industrial and medicinal properties is well established. Methods: A Schiff base ligand (2-fluoro-N’-[(E)-2-hydroxyphenyl) methylene] benzohydrazide) was reacted with a series of transition metals to produce complexes with a general formula [ML₂(NO₃)]NO₃.nH₂O, where [M = Zn, Cu, Co, Ni, Mn], and [n = 0, 1], corresponding to complexes 1–5. The nature of the bond was determined in the solid state and solution using spectral studies (¹H-NMR, ¹³C-NMR, UV-Vis and FT-IR), TGA, EPR, elemental analysis and molar conductivity measurement. Results: All M(II) complexes are 1:1 electrolytes, as illustrated by their molar conductivities. The results demonstrate that all synthesized complexes present a coordination number of six by the bonding of the bidentate ligand via its azomethine nitrogen atoms and carbonyl oxygen atoms, as well as with one nitrate group as a bidentate ligand via two oxygen atoms. The DPPH radical scavenging technique was used to investigate the antioxidant activities of the ligand [L] and the metal complexes. It is clear that the activity increased in M (II) complexes compared to the Schiff base ligand. Complex 5 showed the highest activity, with an excellent activity of 90.4%, while complex 4 showed the lowest. The antibacterial activities of the Schiff base and its complexes have been examined against various pathogenic bacteria to measure their inhibition potential. Complex 2 showed remarkable activity against Gram (+) bacteria and fungi with an MIC value of 8 μg/mL, which is greater than that of the positive controls, oxytetracycline and fluconazole. The catalytic activities of all complexes were examined in the oxidation of aniline, and the results illustrated that all complexes had a 100% selectivity in producing only azobenzene, and complex 4 had the highest activity (91%). Conclusion: The obtained results from this study show that the antioxidant and antibacterial properties of both the Schiff base ligand and its derived complexes are promising, with some demonstrating remarkable activities. Moreover, the catalytic activities and selectivities of the prepared complexes in aniline oxidation are interesting. Full article

The utilization of self-healing polymers is a promising way of solving problems associated with the wear and tear of polymer products, such as those caused by mechanical stress or environmental factors. In this study, a series of novel self-healing, high-strength copolymers of acrylamide, acrylic acid, and novel acrylic complexes of 4′-phenyl-2,2′:6′,2″-terpyridine [Co(II), Ni(II), and Cu(II)] was prepared. A systematic study of the composition and properties of the obtained polymers was carried out using a variety of physicochemical techniques (elemental analysis, gel permeation chromatography (GPC), attenuated total reflectance Fourier transform infrared spectroscopy (ATR/FT-IR), ultraviolet-visible spectroscopy (UV-vis), small-angle X-ray scattering (SAXS), wide-angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), confocal laser scanning microscopy (CLSM), and tensile testing). All metallopolymer samples exhibit autonomous intrinsic healing along with maintaining high tensile strength values (for some samples, the initial tensile strength exceeded 100 MPa). The best values of healing efficiency are possessed by metallopolymers with a nickel complex (up to 83%), which is most likely due to the highest lability of the metal–heteroatom coordination bonds. The example of this system shows the ability to re-heal with negligible deterioration of the mechanical properties. The possibility of tuning the mechanical properties of self-healing films through the use of different metal ions has been demonstrated. Full article

The molecular and supramolecular structures of some M(II) complexes (M = Co, Mn, Cu, Ni, Zn) with a hydrazone-s-triazine ligand (^BMPyTr) were discussed based on single crystal X-ray diffraction (SCXRD), Hirshfeld and DFT analyses. A new Co(II) complex of the same ligand was synthesized and its structure was confirmed to be [Co(^BMPyTr)Cl₂]·H₂O based on FTIR and UV–Vis spectra, elemental analysis and SCXRD. The geometry around Co(II) was a distorted square pyramidal configuration (τ₅ = 0.4), where Co(II) ion is coordinated to one NNN-tridentate ligand (^BMPyTr) and two Cl^- ions. A Hirshfeld analysis indicated all potential contacts within the crystal structure, where the percentages of O⋯H, N⋯H, C⋯H, and H⋯H contacts in one unit were 11.2, 9.3, 11.4, and 45.9%, respectively, while the respective values for the other complex unit were 10.3, 8.8, 10.6, and 48.0%. According to DFT calculations, the presence of strongly coordinating anions, such as Cl^-, in addition to the large metal ion size, were found to be the main reasons for the small M-^BMPyTr interaction energies in the cases of [Mn(^BMPyTr)Cl₂] (260.79 kcal/mol) and [Co(^BMPyTr)Cl₂]·H₂O (307.46 kcal/mol) complexes. Interestingly, the Co(II) complex had potential activity against both Gram-positive (S. aureus and B. subtilis) and Gram-negative (E. coli and P. vulgaris) bacterial strains with inhibition zone diameters of 13, 15, 16, and 18 mm, respectively. Also, the new [Co(^BMPyTr)Cl₂]·H₂O (IC₅₀ = 131.2 ± 6.8 μM) complex had slightly better cytotoxic activity against HCT-116 cell line compared to ^BMPyTr (145.3 ± 7.1 μM). Full article