Search Results (20,229)

A scalable synthesis of two-dimensional titanium nitride chloride (TiNCl) via flash Joule heating (FJH) using titanium tetrachloride (TiCl₄) precursor has been developed. This single-step method overcomes traditional synthesis challenges, including high energy consumption, multi-step procedures, and hazardous reagent requirements. The structural and chemical properties of the synthesized TiNCl were characterized through multiple analytical techniques. X-ray diffraction (XRD) patterns confirmed the presence of TiNCl phase, while Raman spectroscopy data showed no detectable oxide impurities. Fourier transform infrared spectroscopy (FTIR) analysis revealed characteristic Ti–N stretching vibrations, further confirming successful titanium nitride synthesis. Transmission electron microscopy (TEM) imaging revealed thin, plate-like nanostructures with high electron transparency. These analyses confirmed the formation of highly crystalline TiNCl flakes with nanoscale dimensions and minimal structural defects. The material exhibits excellent structural integrity and phase purity, demonstrating potential for applications in photocatalysis, electronics, and energy storage. This work establishes FJH as a sustainable and scalable approach for producing MXenes with controlled properties, facilitating their integration into emerging technologies. Unlike conventional methods, FJH enables rapid, energy-efficient synthesis while maintaining material quality, providing a viable route for industrial-scale production of two-dimensional materials. Full article

Background: The global increase in type 2 diabetes mellitus (T2DM) cases necessitates the need for early detection of metabolic changes. This study investigated variations in liver enzymes, renal markers, electrolytes, and lipid profiles among T2DM patients stratified by hemoglobin A1c (HbA1c) categories to support early identification and better management of diabetes-related complications. Methods: A retrospective observational study at King Khalid University Hospital (KKUH), Riyadh, included 621 adult patients diagnosed with T2DM categorized into four HbA1c groups: normal (<5.7%), prediabetes (5.7–6.4%), controlled diabetes (6.5–7.9%), and uncontrolled diabetes (≥8.0%). Biochemical parameters included the liver profile: alkaline phosphatase (ALP) and bilirubin, renal profile: creatinine, blood urea nitrogen (BUN), glucose, sodium, and chloride, and lipid profile: cholesterol, high-density lipoprotein (HDL), low-density lipoprotein (LDL), and triglycerides. Regression models identified predictors of ALP, cholesterol, and LDL. Results: ALP was higher in uncontrolled diabetes (89.0 U/L, Q1–Q3: 106.3–72.0) than in the prediabetes group (75.0 U/L, Q1–Q3: 96.8–62.3). Sodium and chloride were lower in uncontrolled diabetes (Na: 138.3 mmol/L, Q1–Q3: 140.3–136.4; Cl: 101.1 mmol/L, Q1–Q3: 102.9–99.4) compared to the normal group (Na: 139.5 mmol/L, Q1–Q3: 142.4–136.9; Cl: 103.5 mmol/L, Q1–Q3: 106.1–101.7). LDL was lower in uncontrolled diabetes (2.1 mmol/L, Q1–Q3: 2.8–1.7) than in the normal group (2.8 mmol/L, Q1–Q3: 3.7–2.2), while triglycerides were higher in patients with uncontrolled diabetes compared to the normal group (1.45 mmol/L, Q1–Q3: 2.02–1.11 vs. 1.26 mmol/L, Q1–Q3: 1.44–0.94). Regression models showed low explanatory power (R² = 2.1–7.3%), with weight, age, and sex as significant predictors of select biochemical markers. Conclusions: The study observed biochemical variations across HbA1c categories in T2DM patients, likely reflecting insulin resistance. Monitoring these markers in conjunction with HbA1c can enhance early detection and improve the management of complications. Full article

This study systematically investigated the oxidation of chitosan using the TEMPO/NaClO/NaBr catalytic system under varying experimental conditions, namely temperature, reaction time, and pH, in order to optimize the oxidation process. Response surface methodology (RSM) was employed to determine the optimal parameters for maximizing the efficiency of the reaction. The structural modifications to the chitosan following oxidation were confirmed using Fourier-transform infrared spectroscopy (FTIR), alongside additional analytical techniques, which validated the successful introduction of carbonyl and carboxyl functional groups. Solvent-cast films were prepared from both native and oxidized chitosan in order to evaluate their functional performance. The antibacterial activity of these films was assessed against Gram-negative (Salmonella) and Gram-positive (Streptococcus faecalis) bacterial strains. The oxidized chitosan films exhibited significantly enhanced antibacterial effects, particularly at shorter incubation periods. In addition, antioxidant activity was evaluated using DPPH radical scavenging and ferrous ion chelation assays, which both revealed a marked improvement in radical scavenging ability and metal ion binding capacity in oxidized chitosan. These findings confirm that TEMPO-mediated oxidation effectively enhances the physicochemical and bioactive properties of chitosan, highlighting its potential for biomedical and environmental applications. Full article

This study describes the characterization of a novel thermostable α-amylase from a Bacillus licheniformis 104.K strain isolated from the Kashkadarya region of Uzbekistan. Phylogenetic analysis revealed that the thermostable α-amylase belongs to glycoside hydrolase family 13 subfamily 5 (GH13_5) and shares high sequence similarity with known α-amylases. Our results demonstrate that the recombinant α-amylase exhibits optimal activity at pH 6.0 and 90 °C, retaining full activity after 30 min at 60 °C. The addition of CaCl₂ significantly enhanced thermostability, with the enzyme retaining more than 95% of its initial activity at 70 °C after 30 min. Our findings indicate that α-amylase from B. licheniformis 104.K is a functional, thermostable enzyme with potential industrial applications. This study highlights the commercial significance of thermostable amylases and the need to identify novel, cost-effective, and sustainable sources. The results of this study will contribute to the fields of enzyme applications, stabilizing additives, and genetic engineering of thermostable genes. Full article

To enhance the molten salt corrosion resistance of Ni200 alloy plasma arc welds, the welds were subjected to tensile deformation followed by heat treatment. The grain boundary character distribution (GBCD) was analyzed using electron backscatter diffraction (EBSD) in conjunction with orientation imaging microscopy (OIM). A constant-temperature corrosion test at 900 °C was conducted to evaluate the impact of GBCD on the corrosion resistance of the welds. Results demonstrated that after processing with 6% tensile deformation, and annealing at 950 °C for 30 min, the fraction of low-ΣCSL grain boundaries increased from 1.2% in the as-welded condition to 57.3%, and large grain clusters exhibiting Σ3ⁿ orientation relationships were formed. During the heat treatment, an increased number of recrystallization nucleation sites led to a reduction in average grain size from 323.35 μm to 171.38 μm. When exposed to a high-temperature environment of 75% Na₂SO₄-25% NaCl mixed molten salt, the corrosion behavior was characterized by intergranular attack, with oxidation and sulfidation reactions resulting in the formation of NiO and Ni₃S₂. The corrosion resistance of Grain boundary engineering (GBE)-treated samples was significantly superior to that of Non-GBE samples, with respective corrosion rates of 0.3397 mg/cm²·h and 0.8484 mg/cm²·h. These findings indicate that grain boundary engineering can effectively modulate the grain boundary character distribution in Ni200 alloy welds, thereby enhancing their resistance to molten salt corrosion. Full article

This study systematically investigated the corrosion evolution and protective mechanisms of X80 pipeline steel in Xinjiang’s saline soil environments under freeze–thaw cycling conditions. Combining regional soil characterization with laboratory-constructed corrosion systems, we employed electrochemical impedance spectroscopy, potentiodynamic polarization, and surface analytical techniques to quantify temporal–spatial corrosion behavior across 30 freeze–thaw cycles. Experimental results revealed a distinctive corrosion resistance pattern: initial improvement (cycles 1–10) attributed to protective oxide layer formation, followed by accelerated degradation (cycles 10–30) due to microcrack propagation and chloride accumulation. Synchrotron X-ray diffraction analyses identified sulfate–chloride ion synergism as the primary driver of localized corrosion disparities in heterogeneous soil matrices. A comparative evaluation of asphalt-coated specimens demonstrated a 62%–89% corrosion rate reduction, with effectiveness directly correlating with coating integrity and thickness (200–500 μm range). Molecular dynamics simulations using Materials Studio revealed atomic-scale ion transport dynamics at coating–substrate interfaces, showing preferential Cl⁻ permeation through coating defects. These multiscale findings establish quantitative relationships between environmental stressors, coating parameters, and corrosion kinetics, providing a mechanistic framework for optimizing protective coatings in cold-region pipeline applications. Full article

An anion exchange-assisted technique was used for the synthesis of platinum-decorated SnO₂ supports, providing nanocatalysts with enhanced activity for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). In this study, a series of SnO₂ supports, namely SnA (synthesized almost at room temperature), SnB (hydrothermally treated at 180 °C), and SnC (annealed at 600 °C), are systematically investigated, all loaded with 1 mol% Pt from H₂PtCl₆ under identical mild conditions. The chloride ions from the SnCl₄ precursors were efficiently removed via a strong-base anion exchange reaction, resulting in highly dispersed, crystalline ~5 nm cassiterite SnO₂ particles. All Pt/SnO₂ composites displayed mesoporous structures with type IVa isotherms and H₂-type hysteresis, with SP1a (Pt on SnA) exhibiting the largest surface area (122.6 m²/g) and the smallest pores (~3.5 nm). STEM-HAADF imaging revealed well-dispersed PtOx domains (~0.85 nm), while XPS confirmed the dominant Pt⁴⁺ and Pt²⁺ species, with ~25% Pt⁰ likely resulting from photoreduction and/or interactions with Sn–OH surface groups. Raman spectroscopy revealed three new bands (260–360 cm⁻¹) that were clearly visible in the sample with 10 mol% Pt and were due to the vibrational modes of the PtOx species and Pt-Cl bonds introduced due the addition and hydrolysis of H₂PtCl₆ precursor. TGA/DSC analysis revealed the highest mass loss for SP1a (~7.3%), confirming the strong hydration of the PtOx domains. Despite the predominance of oxidized PtOx species, SP1a exhibited the highest catalytic activity (k_app = 1.27 × 10⁻² s⁻¹) and retained 84.5% activity for the reduction of 4-NP to 4-AP after 10 cycles. This chloride-free low-temperature synthesis route offers a promising and generalizable strategy for the preparation of noble metal-based nanocatalysts on oxide supports with high catalytic activity and reusability. Full article

Background/Objectives: Current dosing recommendations for piperacillin/tazobactam suggest adjustments only for patients with creatinine clearance (CrCl) below 40 mL/min, potentially neglecting the variability in drug exposure among patients with a CrCl greater than 40 mL/min. This study aimed to develop a population pharmacokinetic (PK) model for piperacillin/tazobactam and explore optimal dosage regimens tailored by renal function and pathogen susceptibility. Methods: Twelve healthy adults received a single intravenous dose of piperacillin/tazobactam (4 g/0.5 g). Population PK models were developed using nonlinear mixed-effects modeling. Monte Carlo simulations were conducted to identify optimal dosing regimens across various renal functions and MIC levels, guided by pharmacodynamic targets defined as the percentage of time that free drug concentrations exceed the minimum inhibitory concentration (fT_>MIC). Results: PK profiles of both drugs were best described by two-compartment models. Estimated glomerular filtration rate (eGFR) adjusted by body surface area and body weight were identified as significant covariates influencing drug clearance and peripheral volume of distribution. Simulations showed that the standard dosing regimen (4/0.5 g q6h with 30 min infusion) achieved a 90% probability of target attainment (PTA) for 50%fT_>MIC at MIC values up to 4 mg/L in patients with normal renal function. However, this regimen often did not achieve a 90% PTA for stringent targets (100%fT_>MIC, 100%fT_>4MIC) or higher MICs, particularly in patients with eGFR ≥ 130 mL/min. Conclusions: These findings suggest current dosing regimens may be inadequate and highlight the potential of alternative strategies, such as extended or continuous infusion, which warrant further investigation in clinical populations to optimize therapeutic outcomes. Full article

Rapid socio-economic development and the impact of human activities have exerted tremendous pressure on the groundwater system of the Dawen River Basin (DRB), the largest tributary in the middle and lower reaches of the Yellow River. Hydrochemical studies on the DRB have largely centered on the upstream Muwen River catchment and downstream Dongping Lake, with some focusing solely on karst groundwater. Basin-wide evaluations suggest good overall groundwater quality, but moderate to severe contamination is confined to the lower Dongping Lake area. The hydrogeologically complex mid-reach, where the Muwen and Chaiwen rivers merge, warrants specific focus. This region, adjacent to populous areas and industrial/agricultural zones, features diverse aquifer systems, necessitating a thorough analysis of its hydrochemistry and origins. This study presents an integrated hydrochemical, isotopic investigation and EWQI evaluation of groundwater quality and formation mechanisms within the multiple groundwater types of the central DRB. Central DRB groundwater has a pH of 7.5–8.2 (avg. 7.8) and TDSs at 450–2420 mg/L (avg. 1075.4 mg/L) and is mainly brackish, with Ca²⁺ as the primary cation (68.3% of total cations) and SO₄²⁻ (33.6%) and NO₃⁻ (28.4%) as key anions. The Piper diagram reveals complex hydrochemical types, primarily HCO₃·SO₄-Ca and SO₄·Cl-Ca. Isotopic analysis (δ²H, δ¹⁸O) confirms atmospheric precipitation as the principal recharge source, with pore water showing evaporative enrichment due to shallow depths. The Gibbs diagram and ion ratios demonstrate that hydrochemistry is primarily controlled by silicate and carbonate weathering (especially calcite dissolution), active cation exchange, and anthropogenic influences. EWQI assessment (avg. 156.2) indicates generally “good” overall quality but significant spatial variability. Pore water exhibits the highest exceedance rates (50% > Class III), driven by nitrate pollution from intensive vegetable cultivation in eastern areas (Xiyangzhuang–Liangzhuang) and sulfate contamination from gypsum mining (Guojialou–Nanxiyao). Karst water (26.7% > Class III) shows localized pollution belts (Huafeng–Dongzhuang) linked to coal mining and industrial discharges. Compared to basin-wide studies suggesting good quality in mid-upper reaches, this intensive mid-reach sampling identifies critical localized pollution zones within an overall low-EWQI background. The findings highlight the necessity for aquifer-specific and land-use-targeted groundwater protection strategies in this hydrogeologically complex region. Full article

Background: Cerebral aneurysm (CA) is a focal or diffuse pathological dilation of the cerebral arterial wall that arises due to various etiological factors. It represents a serious vascular condition, particularly affecting the elderly, and carries a high risk of rupture and neurological morbidity. Clonidine (CL), an α2-adrenergic receptor agonist, has been reported to suppress aneurysm progression; however, its underlying molecular mechanisms, especially in relation to cerebral endothelial dysfunction, remain unclear. This study aimed to investigate the potential of CL to mitigate CA development by modulating apoptosis, inflammation, and oxidative stress in an Angiotensin II (Ang II)-induced endothelial injury model. Methods: Human brain microvascular endothelial cells (HBMECs) were used to establish an in vitro model of endothelial dysfunction by treating cells with 1 µM Ang II for 48 h. CL was administered 2 h prior to Ang II exposure at concentrations of 0.1, 1, and 10 µM. Cell viability was assessed using the MTT assay. Oxidative stress markers, including reactive oxygen species (ROS) and Nitric Oxide (NO), were measured using 2′,7′–dichlorofluorescin diacetate (DCFDA). Gene expression levels of vascular endothelial growth factor (VEGF), matrix metalloproteinases (MMP-2 and MMP-9), high mobility group box 1 (HMGB1), and nuclear factor kappa B (NF-κB) were quantified using RT-qPCR. Levels of proinflammatory cytokines; tumor necrosis factor-alpha (TNF-α), Interleukin-6 (IL-6), and interferon-gamma (IFN-γ); were measured using commercial ELISA kits. Results: Ang II significantly increased ROS production and reduced NO levels, accompanied by heightened proinflammatory cytokine release and endothelial dysfunction. MTT assay revealed a marked decrease in cell viability following Ang II treatment (34.18%), whereas CL preserved cell viability in a concentration-dependent manner: 44.24% at 0.1 µM, 66.56% at 1 µM, and 81.74% at 10 µM. CL treatment also significantly attenuated ROS generation and inflammatory cytokine levels (p < 0.05). Furthermore, the expression of VEGF, HMGB1, NF-κB, MMP-2, and MMP-9 was significantly downregulated in response to CL. Conclusions: CL exerts a protective effect on endothelial cells by reducing oxidative stress and suppressing proinflammatory signaling pathways in Ang II-induced injury. These results support the potential of CL to mitigate endothelial injury in vitro, though further in vivo studies are required to confirm its translational relevance. Full article

Antiphospholipid syndrome (APS) is an autoimmune disorder characterized by venous and arterial thrombosis and obstetric complications, driven by antiphospholipid antibodies (APLAs). This review synthesizes the latest advancements and current understanding, diagnosis, and treatment of APS. APLAs, including lupus anticoagulant (LAC), anticardiolipin (aCL), and anti-β2-glycoprotein I (aβ2-GPI), interfere with coagulation and endothelial function, as well as with placental health. APS can be primary or secondary; it is often associated with systemic autoimmune diseases like lupus. The pathogenesis of APS remains only partially understood. APLAs promote thrombosis through endothelial damage, platelet activation, and inflammatory signaling pathways. Laboratory diagnosis relies on persistent positivity for APLAs and LAC through tests like ELISA and clotting assays, following a three-step confirmation process. New integrated test systems have been introduced to improve standardization. Classification criteria have evolved, with the 2023 EULAR-ACR criteria providing a weighted, domain-based scoring system, enhancing diagnostic precision. Catastrophic APS (CAPS) is a severe, rare manifestation of APS, characterized by multi-organ failure due to rapid, widespread microthrombosis and systemic inflammation, which requires urgent anticoagulation. Seronegative APS is proposed for patients with clinical features of APS but negative standard antibody tests, possibly due to non-criteria antibodies or transient immunosuppression. Treatment primarily involves long-term anticoagulation with vitamin K antagonists; direct oral anticoagulants are generally not recommended. APS diagnosis and management remain complex due to clinical heterogeneity and laboratory challenges. Continued refinement of diagnostic tools and criteria is essential for improving outcomes in this life-threatening condition. Full article

The determination of multiple energy minima on complex potential energy surfaces is challenging. A systematic desymmetrization procedure was employed to find stationary points on the copper(I) + chloride + water potential energy surface using HF, MP2, and B3LYP methods in conjunction with the 6-31G*, 6-31+G*, and 6-311+G* basis sets. Comparison with experimental results demonstrated that the speciation of copper(I) in the presence of chloride and water may be formulated as [CuCl(H₂O)]⁰, [CuCl₂]⁻, and [CuCl₃]²⁻. Our results indicate that the combination of the MP2 method along with basis sets containing diffuse functions gives excellent agreement with experimental Cu-Cl distances and vibrational frequencies. Poorer results were obtained at the HF levels and/or using the 6-31G* basis set. Full article

The present article aims to develop a technological scheme for processing zinc ferrite residue, which typically forms during the leaching of zinc calcine. This semi-product is currently processed through the Waelz process, the main disadvantage of which is the loss of precious metals with the Waelz clinker. The experimental results of numerous experiments and analyses have verified a technological scheme including the following operations: sulfuric acid leaching of zinc ferrite residue under atmospheric conditions; autoclave purification of the resulting productive solution to obtain hematite; chloride leaching of lead and silver from the insoluble residue, which was produced in the initial operation; and cementation with zinc powder of lead and silver from the chloride solution. Utilizing such an advanced methodology, the degree of zinc leaching is 98.30% at a sulfuric acid concentration of 200 g/L, with a solid-to-liquid ratio of 1:10 and a temperature of 90 °C. Under these conditions, 96.40% Cu and 92.72% Fe form a solution. Trivalent iron in the presence of seeds at a temperature of 200 °C precipitates as hematite. In chloride extraction with 250 g/L NaCl, 1 M HCl, and a temperature of 60 °C, the leaching degree of lead is 96.79%, while that of silver is 84.55%. In the process of cementation with zinc powder, the degree of extraction of lead and silver in the cement precipitate is 98.72% and 97.27%, respectively. When implementing this scheme, approximately 15% of the insoluble residue remains, containing 1.6% Pb and 0.016% Ag. Full article

Seed germination and early seedling growth are pivotal stages that define crop establishment and yield potential. Conventional agrochemicals used to improve these processes often raise environmental concerns, highlighting the need for sustainable alternatives. In this study, we demonstrated that water treated with cylindrical dielectric barrier discharge (c-DBD) plasma, enriched with nitric oxide (NO) and reactive nitrogen species (RNS), markedly enhanced onion (Allium cepa) seed germination and seedling vigor. The plasma-treated water (PTW) promoted rapid imbibition, broke dormancy, and accelerated germination rates beyond 98%. Seedlings irrigated with PTW exhibited significantly increased biomass, root and shoot length, chlorophyll content, and antioxidant enzyme activities, accompanied by reduced lipid peroxidation. Transcriptomic profiling revealed that PTW orchestrated a multifaceted regulatory network by upregulating gibberellin biosynthesis genes (GA3OX1/2), suppressing abscisic acid signaling components (ABI5), and activating phenylpropanoid metabolic pathways (PAL, 4CL) and antioxidant defense genes (RBOH1, SOD). These molecular changes coincided with elevated NO₂⁻ and NO₃⁻ levels and finely tuned hydrogen peroxide dynamics, underpinning redox signaling crucial for seed activation and stress resilience. Our findings establish plasma-generated NO-enriched water as an innovative, eco-friendly technology that leverages redox and hormone crosstalk to stimulate germination and early growth, offering promising applications in sustainable agriculture. Full article

The development of novel platinum-based anticancer agents remains a critical objective in medicinal inorganic chemistry, particularly in light of resistance and toxicity limitations associated with cisplatin. In this study, the synthesis, structural characterization, quantum chemical analysis, and cytotoxic evaluation of four new acetylplatinum(II) complexes (cis-[Pt(COMe)₂(PASO₂)₂], cis-[Pt(COMe)₂(DAPTA)₂], trans-[Pt(COMe)Cl(DAPTA)₂], and trans-[Pt(COMe)Cl(PASO₂)]: 1–4, respectively) bearing cage phosphine ligands PASO₂ (2-thia-1,3,5-triaza-phosphaadamantane 2,2-dioxide) and DAPTA (3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane) are presented. The coordination geometries and NMR spectral features of the cis/trans isomers were elucidated through multinuclear NMR and DFT calculations at the B3LYP/6-311++G(d,p)/LanL2DZ level, with strong agreement between experimental and theoretical data. Quantum Theory of Atoms in Molecules (QTAIM) analysis was applied to investigate bonding interactions and assess the covalent character of Pt–ligand bonds. Cytotoxicity was evaluated against five human cancer cell lines. The PASO₂-containing complex in cis-configuration, 1, demonstrated superior activity against thyroid (8505C) and head and neck (A253) cancer cells, with potency surpassing that of cisplatin. The DAPTA complex 2 showed enhanced activity toward ovarian (A2780) cancer cells. These findings highlight the influence of ligand structure and isomerism on biological activity, supporting the rational design of phosphine-based Pt(II) anticancer drugs. Full article