Materials | Top 10 Cited Papers in 2022 in the Section “Materials Chemistry”

We are pleased to invite you to read the top 10 cited papers in 2022 in Materials (ISSN: 1996-1944) in the Section “Materials Chemistry”. The paper list is as follows:

1. “The Use of Chitosan and Starch-Based Flocculants for Filter Backwash Water Treatment”
by Piotr Maćczak, Halina Kaczmarek, Marta Ziegler-Borowska, Katarzyna Węgrzynowska-Drzymalska and Aleksandra Burkowska-But
Materials 2022, 15(3), 1056; https://doi.org/10.3390/ma15031056
Available online: https://www.mdpi.com/1996-1944/15/3/1056

2. “Fabrication of PLA/PCL/Graphene Nanoplatelet (GNP) Electrically Conductive Circuit Using the Fused Filament Fabrication (FFF) 3D Printing Technique”
by Nour-Alhoda Masarra, Marcos Batistella, Jean-Christophe Quantin, Arnaud Regazzi, Monica Francesca Pucci, Roland El Hage and José-Marie Lopez-Cuesta
Materials 2022, 15(3), 762; https://doi.org/10.3390/ma15030762
Available online: https://www.mdpi.com/1996-1944/15/3/762

3. “Impact of Gamma Irradiation on the Properties of Magnesium-Doped Hydroxyapatite in Chitosan Matrix”
by Daniela Predoi, Carmen Steluta Ciobanu, Simona Liliana Iconaru, Silviu Adrian Predoi, Mariana Carmen Chifiriuc, Steinar Raaen, Monica Luminita Badea and Krzysztof Rokosz
Materials 2022, 15(15), 5372; https://doi.org/10.3390/ma15155372
Available online: https://www.mdpi.com/1996-1944/15/15/5372

4. “Synthesis of Hydroxyapatite/Iron Oxide Composite and Comparison of Selected Structural, Surface, and Electrochemical Properties”
by Adrianna Biedrzycka, Ewa Skwarek, Dariusz Osypiuk and Beata Cristóvao
Materials 2022, 15(3), 1139; https://doi.org/10.3390/ma15031139
Available online: https://www.mdpi.com/1996-1944/15/3/1139

5. “Impact of Mechanical Stress and Nitrogen Doping on the Defect Distribution in the Initial Stage of the 4H-SiC PVT Growth Process”
by Johannes Steiner and Peter J. Wellmann
Materials 2022, 15(5), 1897; https://doi.org/10.3390/ma15051897
Available online: https://www.mdpi.com/1996-1944/15/5/1897

6. “Recent Advances in Materials for Wearable Thermoelectric Generators and Biosensing Devices”
by Maria Sattar and Woon-Hong Yeo
Materials 2022, 15(12), 4315; https://doi.org/10.3390/ma15124315
Available online: https://www.mdpi.com/1996-1944/15/12/4315

7. “Influence of Silicone Additives on the Properties of Pressure-Sensitive Adhesives”
by Karolina Mozelewska and Adrian Krzysztof Antosik
Materials 2022, 15(16), 5713; https://doi.org/10.3390/ma15165713
Available online: https://www.mdpi.com/1996-1944/15/16/5713

8. “Fabrication, Characterization and Evaluation of an Alginate–Lignin Composite for Rare-Earth Elements Recovery”
by Dominika Fila, Zbigniew Hubicki and Dorota Kołodyńska
Materials 2022, 15(3), 944; https://doi.org/10.3390/ma15030944
Available online: https://www.mdpi.com/1996-1944/15/3/944

9. “Visible-Light-Driven AO7 Photocatalytic Degradation and Toxicity Removal at Bi-Doped SrTiO₃”
by Maria João Nunes, Ana Lopes, Maria José Pacheco and Lurdes Ciríaco
Materials 2022, 15(7), 2465; https://doi.org/10.3390/ma15072465
Available online: https://www.mdpi.com/1996-1944/15/7/2465

10. “Effect of Electrode Modification with Chitosan and Nafion® on the Efficiency of Real-Time Enzyme Glucose Biosensors Based on ZnO Tetrapods”
by Valerii Myndrul, Igor Iatsunskyi, Nataliya Babayevska, Marcin Jarek and Teofil Jesionowski
Materials 2022, 15(13), 4672; https://doi.org/10.3390/ma15134672
Available online: https://www.mdpi.com/1996-1944/15/13/4672